A
-
Absorption
The use of lignocellulosic waste of rice straw for AO7 and RBB dyes adsorption from water [Volume 9, Issue 3, 2018, Pages 397-409]
-
Abstracts
Abstacts [Volume 7, Issue 1, 2016, Pages 155-167]
-
Accelerated Aging
Stiffness changes in MDF kitchen cabinet after accelerated aging test [Volume 4, Issue 1, 2013, Pages 131-141]
-
Accelerated Aging
Study on Leaching of Copper Nanoparticles in Combined Impregnation- Densification Treatments of wood after Accelerated Aging [Volume 6, Issue 1, 2015, Pages 159-165]
-
Accelerated Aging
Investigation of physical and mechanical performance of wood-based composites after laboratory accelerated aging [Volume 9, Issue 1, 2018, Pages 103-117]
-
Accelerated Aging
EFFECT OF DRY- HEAT AND MOIST-HEAT AGING ON PROPERTIES OF PAPERS TREATED WITH NANO CALCIUM HYDROXIDE AND NANO CHITOSAN [Volume 9, Issue 2, 2018, Pages 277-288]
-
Accessibility
Acidic prehydrolysis role in dissolving pulp production from OCC [Volume 9, Issue 3, 2018, Pages 441-457]
-
Acer velutinum var. glabrescens
The mechanical properties of Acer velutinum var. glabrescens wood growing in different regions of Caspian forests [Volume 7, Issue 1, 2016, Pages 79-90]
-
Acetylation
Measurement of Fiber Saturation Point of Wood Using Differential Scanning Calorimetry: Measurement Fundamentals and Experimental Results [Volume 7, Issue 4, 2016, Pages 615-623]
-
Acid catalyst lacquers
Investigation on the Scratch Strength of Clear Paints Used in Furniture Industries on the Wood Species Beech, Elm, Alder and Spruce [Volume 5, Issue 1, 2014, Pages 33-44]
-
Acid Hydrolysis
Effect of Diluted Acid Pre-Extraction on Soda Pulping of Bagasse [Volume 5, Issue 1, 2014, Pages 119-128]
-
Acid Hydrolysis
Evaluation of properties of microcrystalline cellulose produced from bagasse fibers using hydrochloric acid [Volume 12, Issue 3, 2021, Pages 441-452]
-
Acid Hydrolysis
Structural properties and thermal stability of nano crystalline cellulose produced from waste paper [Volume 13, Issue 1, 2022, Pages 37-47]
-
Acid hydrolyze
Preparation and Characterization of Microcrystalline Cellulose (MCC)
from Kenaf and Cotton Stem [Volume 4, Issue 2, 2013, Pages 23-32]
-
Acid Prehydrolysius
Acidic prehydrolysis role in dissolving pulp production from OCC [Volume 9, Issue 3, 2018, Pages 441-457]
-
Acoustic boards
Study on the possibility of using bagasse in manufacture of sound-proof particleboard [Volume 3, Issue 1, 2013, Pages 43-52]
-
Acoustic coefficient
The Investigation of Acoustic Properties of Carbon Fiber-Polyester Composites and Comparing the Results with Poplar, Walnut and Beech Wood Specimens [Volume 1, Issue 2, 2011, Pages 83-101]
-
Acoustic properties
Effect of coating with Shellac on acoustic properties in white mulberry wood [Volume 9, Issue 1, 2018, Pages 27-40]
-
Acrylonitrile Butadiene Styrene
Study on Physical and Mechanical Properties of Wood flour / ABS Composites [Volume 6, Issue 1, 2015, Pages 79-93]
-
Activated Carbon
The use of cellulose nanofibers to reduce harmful substances from cigarette smoke [Volume 11, Issue 1, 2020, Pages 19-31]
-
Activated Carbon
Investigation of isotherm and kinetic of methylene blue adsorption by Tobacco residues activated carbon/ZnO nanocomposites with non-linear method [Volume 11, Issue 1, 2020, Pages 71-83]
-
Activated peroxide
A Comparison Between Alkali Peroxide and Activated Peroxide Processes in Bleaching Hardwoods Chemi-mechanical Pulp [Volume 3, Issue 2, 2013, Pages 91-103]
-
Additives
Optimization of properties of cement-bonded particleboard manufactured from cotton stalk and sawdust containing calcium chloride CaCl2 as an additive [Volume 7, Issue 1, 2016, Pages 55-68]
-
Additives
Optimization of production variables of natural fibers- cement composites by response surface methodology (RSM) [Volume 11, Issue 1, 2020, Pages 97-108]
-
Additives
Utilization of the various recycled fibers composition in producing packaging paper [Volume 14, Issue 1, 2023, Pages 65-78]
-
ADF test
Investigation the factors influencing on demand for lumber imports in Iran [Volume 4, Issue 1, 2013, Pages 101-116]
-
Adhesion
The effect of Cerium Dioxide Nanoparticles on the Physical Properties of Polyurethane Clear Coating [Volume 8, Issue 4, 2017, Pages 645-656]
-
Adhesion
Investigation of the effect of palm texture densification on surface properties and coating quality with water-based and solvent-based coatings for use in furniture [Volume 11, Issue 3, 2020, Pages 419-431]
-
Adhesion
Identifying the effect of plasma treatment on the palm texture with application attitude in the furniture industry [Volume 12, Issue 1, 2021, Pages 109-120]
-
Adhesion characteristics
The effect of nano-SiO2 particles and film thickness on physical properties of transparent wood coatings [Volume 12, Issue 1, 2021, Pages 1-15]
-
Adhesion factor
Dynamic Mechanical and Thermal Properties of Bagasse/Glass Fiber/Polypropylene Hybrid Composites [Volume 7, Issue 1, 2016, Pages 103-114]
-
Adhesion Strength
Study on Adhesion Strength of clear Coatings in Beech -Furfuryl alcohol wood polymer [Volume 7, Issue 1, 2016, Pages 115-127]
-
Adhesion Strength
Effect of species type and sanding sequence on the adhesion strength and the interphase region of Polyurethane coating and veneer [Volume 11, Issue 2, 2020, Pages 317-332]
-
Adhesive
Investigation of the impact resistance of the plywood made with adhesive enhanced with Cellulose Nanofibers [Volume 9, Issue 2, 2018, Pages 263-275]
-
Adsorption
Investigation of isotherm and kinetic of methylene blue adsorption by Tobacco residues activated carbon/ZnO nanocomposites with non-linear method [Volume 11, Issue 1, 2020, Pages 71-83]
-
Adsorption
Investigation of the properties of modified lignin-derived porous carbon for Lead removal [Volume 14, Issue 3, 2023, Pages 327-338]
-
Adsorption CO2
The Effect of Concentration of Modified Cellulose NanoFibers by phthalimide on the Adsorption Rate of Carbon Dioxide (CO2) [Volume 10, Issue 3, 2019, Pages 397-406]
-
Adsorption isotherm
The use of lignocellulosic waste of rice straw for AO7 and RBB dyes adsorption from water [Volume 9, Issue 3, 2018, Pages 397-409]
-
AHP
Determination of Effective Criteria for location Selection of WPC Plants from agricultural residues in Iran by AHP Technique [Volume 7, Issue 4, 2016, Pages 499-510]
-
Air filters
The Effect of Concentration of Modified Cellulose NanoFibers by phthalimide on the Adsorption Rate of Carbon Dioxide (CO2) [Volume 10, Issue 3, 2019, Pages 397-406]
-
AirFilters
An overview of the properties of nanofilters derived from cellulose nanofibers for the adsorption of air pollutants [Volume 11, Issue 3, 2020, Pages 497-511]
-
AKD
The influence of type of calcium carbonate fillers on the performance AKD and mechanical properties of printing and writing paper [Volume 7, Issue 1, 2016, Pages 69-77]
-
Alder
The model of multiple criteria decision making to determine the optimal product and identify target markets based on poplar, alder and loblolly-pine [Volume 10, Issue 2, 2019, Pages 189-203]
-
Alfalfa
The Effects of Agroforestry Practices on Physical Propertiesin of Poplus Wood in Radial and Longitudinal Axes [Volume 2, Issue 2, 2011, Pages 53-64]
-
Alkali lignin
Extraction of lignin with lignoboost process and production of water-soluble sulfonated derivatives from lignin of bagasse soda black liquor [Volume 10, Issue 2, 2019, Pages 237-247]
-
Alkaline pre-extraction
Effect of pre- extraction liquid reuse on and soda-AQ pulp properties made
up of wheat straw [Volume 4, Issue 1, 2013, Pages 1-12]
-
Alkaline pre-extraction
Investigation on the Influence of Alkaline Pre-Extraction of Barley Straw on Soda and Monoethanolamine Pulps Properties [Volume 9, Issue 4, 2018, Pages 485-495]
-
Alkali peroxide
A Comparison Between Alkali Peroxide and Activated Peroxide Processes in Bleaching Hardwoods Chemi-mechanical Pulp [Volume 3, Issue 2, 2013, Pages 91-103]
-
Alkali sulfite – anthraquinone process
The effect of using Alkali sulfit-Anthraquinone (AS-AQ) liquor powder as filler of urea formaldehyde resin on functional properties of plywood [Volume 9, Issue 3, 2018, Pages 337-347]
-
Alkali sulfite (AS)
The product of pulp from hornbeam with alkaline sulfite- AQ process [Volume 10, Issue 4, 2019, Pages 479-494]
-
Alkali treatment
The effect of alkali treatment of bamboo on the physical and mechanical properties of particleboard made from bamboo - industrial wood particles [Volume 8, Issue 4, 2017, Pages 605-615]
-
Alkali treatment
The effect of alkali treatment of wheat straw powder on particle board properties made from mixing wheat straw and industrial wood chips [Volume 12, Issue 1, 2021, Pages 57-71]
-
Alkoxysilane
Investigation of the use of tetramethyl orthosilicate (Alkoxysilane) on compatibility, mechanical and physical properties of wood-cement particleboard [Volume 13, Issue 4, 2022, Pages 419-431]
-
Almond shell
Effect of using Almond shell flour and OCC on the properties of the production briquette [Volume 14, Issue 4, 2023, Pages 415-431]
-
Almost Ideal Demand System
The Effect of Targeted Subsidies on the Demand Patern of Wood and its Products in Khorramabad City [Volume 9, Issue 4, 2018, Pages 525-535]
-
Alternate Bending
Anatomical Variations in Tension Wood of Populus alba under alternate bending, nitrogen fertilization and gibberellin treatments [Volume 11, Issue 1, 2020, Pages 147-160]
-
Alum
Effect of alum-dispersed rosin system on water absorption, strength and optical properties of papers made from recycled fibers [Volume 10, Issue 3, 2019, Pages 385-395]
-
Alumina
Minimizing hot-press time in the manufacturing process
of wood plastic composites [Volume 4, Issue 2, 2013, Pages 79-90]
-
Aluminium powder
Investigation on Effect of Additives on Thermal Conductivity of Herbaceous Fiber Reinforced Cement Composite [Volume 3, Issue 2, 2013, Pages 39-52]
-
Aluminum chloride
Determination the optimal condition for surface modification of spruce wood with Rosin Maleic [Volume 11, Issue 4, 2020, Pages 657-668]
-
Ammodendron persicum
Investigate of Biometric andChemical Properties of Ammodendron persicum Fibers (Case Study; Zirkouh area - Qaenat City, South Khorasan, Iran) [Volume 10, Issue 1, 2019, Pages 49-62]
-
Ammonia
Investigating the changes in the surface quality of common species in furniture industry using chemical vapors [Volume 10, Issue 1, 2019, Pages 63-75]
-
Amylase
The effect of enzymatic pre-treatment with amylase and refining on the physical and dewatering properties of OCC pulp [Volume 12, Issue 4, 2021, Pages 507-519]
-
Analytical hierarchy process
Determination of Effective Criteria on site selection for
Solar Wood Drying Units in Iran [Volume 4, Issue 2, 2013, Pages 101-110]
-
Analytical hierarchy process
Location Selection for Hardboard Industry in Mazandaran Province [Volume 2, Issue 2, 2011, Pages 65-81]
-
Analytical hierarchy process
Determining the effective indices on export development of Iran’s office furniture thereby analytical hierarchy process (AHP) [Volume 5, Issue 2, 2014, Pages 107-118]
-
Analytical hierarchy process
Determination and Prioritiz ation of Effective Criteria in Construction of Particleboard Factories with Using Wastes of Tamarisk, Palms and Musa Trees
Case Study: Sistan and Baluchestan province [Volume 6, Issue 1, 2015, Pages 13-29]
-
Analytical hierarchy process
The model of multiple criteria decision making to determine the optimal product and identify target markets based on poplar, alder and loblolly-pine [Volume 10, Issue 2, 2019, Pages 189-203]
-
Analytical hierarchy process
Identification of Cleaner Production criteria at Kimia Choob Medium Density Fiber Board [Volume 11, Issue 2, 2020, Pages 225-240]
-
Analytical Hierarchy process(AHP)
Determination of Effective Criteria for Location Selection of Kiln Wood Drying Plants by AHP Technique [Volume 1, Issue 2, 2011, Pages 55-67]
-
Analytical Hierarchy Process (AHP)
Determination and evaluation of effective criteria to
location selection the optimal for establishing fluting paper mills from
agricultural residues of Mazandaran province [Volume 4, Issue 2, 2013, Pages 45-64]
-
Analytical Hierarchy Process (AHP)
Effective Indices in Site Selection of Furniture Industry from Point of View of Suppliers in North Khorasan Province: Application of AHP Method [Volume 2, Issue 2, 2011, Pages 135-145]
-
Analytical Hierarchy Process (AHP)
Determination effective criteria in optimizing energy consumption in Kaveh paper industry company using analytic Hierarchy process [Volume 12, Issue 3, 2021, Pages 391-403]
-
Analytic hierarchy process (AHP)
Determination of effective criteria on development of RTA Furniture Industry in Iran [Volume 7, Issue 1, 2016, Pages 13-32]
-
Analytic network presses
Analysis of Poplar process value chain in Western Azerbaijan province aims to upgrading [Volume 6, Issue 1, 2015, Pages 41-52]
-
Anatomical properties
The effect of heat treatment on anatomical, physical, color and mechanical properties of birch wood [Volume 13, Issue 4, 2022, Pages 519-529]
-
Anatomical properties
The effect of heat treatment on the physical, chemical and anatomical characteristics of date palm wood [Volume 14, Issue 2, 2023, Pages 155-167]
-
ANP
Strategic planning for wood farming development (Case study: Urmia) [Volume 8, Issue 4, 2017, Pages 533-548]
-
Antagonism
Bio-control of white and brown rot in beech and spruce wood using Bacillus amyloliquefaciens [Volume 11, Issue 2, 2020, Pages 293-304]
-
Antibacterial
Evaluation of Strength, Optical and Antibacterial Properties of Treated Papers by Chitosan and Nano Zinc Oxide [Volume 12, Issue 1, 2021, Pages 145-162]
-
Antibacterial
Evaluation of antibacterial performance of iron oxide nanoparticles stabilized by biodegradable lignocellulosic materials [Volume 12, Issue 3, 2021, Pages 337-350]
-
Antibacterial Paper
Application of nano-titanium dioxide in the manufacture of Photocatalyst Securities Paper by controlled hydrolysis method [Volume 10, Issue 1, 2019, Pages 21-34]
-
Antibacterial Paper
Improving the Antibacterial Effect of Pomegranate Peel Extract with Nano-chitosan Using Encapsulation Technique in Sanitary Papermaking [Volume 11, Issue 4, 2020, Pages 513-532]
-
Antibacterial Paper
Study of antibacterial activity and other properties of paper coated by selenium nanoparticles [Volume 12, Issue 1, 2021, Pages 29-44]
-
Antimicrobial
Development of biodegradable antibacterial poly-lactic acid based packaging films with bioactive compounds [Volume 9, Issue 2, 2018, Pages 153-162]
-
Apparent density
Effect of Lactase Enzyme on Delignification and Physical
Properties of OCC Pulp [Volume 3, Issue 2, 2013, Pages 157-170]
-
Aramid and Cellulose fibers
Comparative study on natural cellulosic and synthesized aramid fibers on mechanical properties of epoxy composite [Volume 10, Issue 3, 2019, Pages 417-427]
-
ARDL
Estimating the demand for recycled paper in Iran: based on the ARDL approach [Volume 14, Issue 3, 2023, Pages 285-298]
-
Artificial neural network
An artificial neural network model for predicting modulus of elasticity and modulus of rupture of particleboard comparison with a multiple linear regression model [Volume 12, Issue 2, 2021, Pages 283-297]
-
Artificial neural networks
Comparison of predicted thickness swelling of particleboard with fuzzy systems and artificial neural networks [Volume 6, Issue 1, 2015, Pages 53-66]
-
Aspen
Study of Behavior and Measurement of Seismic Resistant Connections in Light Structural Frame Out of Aspen [Volume 3, Issue 1, 2013, Pages 81-97]
-
Aspergillus fungi
Effect Of Paper Deacidification With Nano Calcium Hydroxide and Nano Hydroxyapatite, With Nano Cellulose And Nano Chitosan On Its Anti-Fungal Properties [Volume 9, Issue 1, 2018, Pages 53-63]
-
Aspergillus mold
Microencapsulation of Zataria multiflora thyme essential oil to improve its antifungal efficiency by controlled release mechanism [Volume 8, Issue 4, 2017, Pages 563-571]
-
Asymmetric effects
The Asymmetric Impacts of Currency Shocks on Wood Imports and Wood Products in Iran with Emphasis on the Environment of Shock Formation [Volume 11, Issue 4, 2020, Pages 585-598]
-
Autoclave
Recycling of waste MDF via digester and production of nanocrystalline cellulose from recycled fibers [Volume 12, Issue 2, 2021, Pages 271-282]
-
Awareness
Survey on public awareness and participation in waste separation from Behbahan city [Volume 11, Issue 2, 2020, Pages 269-279]
B
-
Bagasse
Study on the possibility of using bagasse in manufacture of sound-proof particleboard [Volume 3, Issue 1, 2013, Pages 43-52]
-
Bagasse
Properties Evaluation of High Density Polyethylene Composite Filled with Bagasse after Accelerated Weathered [Volume 3, Issue 2, 2013, Pages 119-130]
-
Bagasse
Carboxymethyl Cellulose (CMC) Preparation from Mixed Office Wastepaper Deinked and Bleached Bagasse pulps: Characterization and Comparison [Volume 7, Issue 3, 2016, Pages 311-321]
-
Bagasse
Application of cellulosic nanofibers to replace with imported long- fiber pulps in paper made from bagasse [Volume 7, Issue 4, 2016, Pages 523-536]
-
Bagasse
Comparative investigation of treated bagasse and rice straw on physical and mechanical properties of natural fiber reinforced composites (NFRC) [Volume 8, Issue 3, 2017, Pages 453-469]
-
Bagasse
Using of xylanase and cold caustic extraction to remove hemicellulose from bagasse bleached pulp for dissolving pulp production [Volume 10, Issue 1, 2019, Pages 1-9]
-
Bagasse
Chemical treatment of Bagasse by oxalic acid-choline chloride and lactic acid-choline chloride deep eutectic solvents [Volume 10, Issue 4, 2019, Pages 559-573]
-
Bagasse
Application of micrometer and nanometer binders to improve the properties of biofuel briquettes [Volume 11, Issue 1, 2020, Pages 133-145]
-
Bagasse
Use of titanium dioxide nanoparticles and aqueous methylene blue on ECF bleaching of bagasse pulp [Volume 11, Issue 2, 2020, Pages 211-224]
-
Bagasse
Energy Consumption Analysis in Production of bagasse and greenhouse gas emission (GHG) assessment from this product and Medium Density Fiberboard based on it [Volume 11, Issue 3, 2020, Pages 471-483]
-
Bagasse
The possibility of using zeolite as a retarder of particleboard obtained from sugarcane pulp [Volume 12, Issue 3, 2021, Pages 309-321]
-
Bagasse
The effect of submicron cellulose binder on the properties of briquettes made from bagasse and rapeseed [Volume 14, Issue 3, 2023, Pages 243-251]
-
Bagasse
Investigating the characteristics of wood-plastic composites made from bagasse [Volume 14, Issue 3, 2023, Pages 271-283]
-
Bagasse chemical pulp
Effect of the addition of bagasse and imported long fiber chemical pulps on the properties of chemical-mechanical pulp produced from hornbeam, beech and poplar mixture [Volume 10, Issue 1, 2019, Pages 143-152]
-
Bagasse pulp fibers
Effect of Bagasse Chemical Pulping and Coupling Agent on the Physical - Mechanical Properties of Composites Based on Bagasse pulp/Low density polyethylene [Volume 7, Issue 3, 2016, Pages 349-362]
-
Bagasse soda pulp
Use of viscozyme enzyme as an alternative technology for pulp refining and improvement bagasse soda pulp properties [Volume 6, Issue 1, 2015, Pages 95-108]
-
Bagasse storage
The Effect of Protexin Enzyme for Bagasse Storage on Pulp and Paper Properties [Volume 10, Issue 3, 2019, Pages 457-468]
-
Bamboo
The effect of alkali treatment of bamboo on the physical and mechanical properties of particleboard made from bamboo - industrial wood particles [Volume 8, Issue 4, 2017, Pages 605-615]
-
Bamboo
Improving the mechanical and physical properties of particleboard produced from bamboo- industrial wood using polypropylene powder [Volume 9, Issue 2, 2018, Pages 199-208]
-
Barley straw
Investigation on the Influence of Alkaline Pre-Extraction of Barley Straw on Soda and Monoethanolamine Pulps Properties [Volume 9, Issue 4, 2018, Pages 485-495]
-
Barrier coating
A novel paper packaging coated with polyethylene wax based dispersion barrier coating for food packaging applications [Volume 11, Issue 1, 2020, Pages 85-95]
-
Bast
Investigation on the Fiber Biometry and Chemical Compounds of Bast and without Bast Stalk of Cotton Stalk Sahel Variety [Volume 2, Issue 1, 2011, Pages 91-101]
-
Batch foaming Method
Investigation on the Effect of Chemical Foaming agent and Wood Flour content on Mechanical Properties, Density and Cell morphology of HDPE/EVA/ Wood Flour Hybrid Foamed Composites [Volume 2, Issue 1, 2011, Pages 63-80]
-
Beech
Comparative Study of Heat Treated Beech Wood in Hot Water
and Steam Mediums [Volume 2, Issue 1, 2011, Pages 27-38]
-
Beech
Study on the Effect of Heat Treatment on Physical Properties of Poplar and Beech Woods Impregnated with Nano-Copper and Nano-Silver [Volume 3, Issue 1, 2013, Pages 109-117]
-
Beech
Determination of bending moment resistance of t-type joints constructed with wood biscuit [Volume 5, Issue 2, 2014, Pages 47-58]
-
Beech
The effect of combined colloidal nano silver-hydrothermal treatment on weight changes and chemical structure of beech wood (Fagus orientalis) [Volume 6, Issue 1, 2015, Pages 109-118]
-
Beech
Study on Adhesion Strength of clear Coatings in Beech -Furfuryl alcohol wood polymer [Volume 7, Issue 1, 2016, Pages 115-127]
-
Beech
Comparison Study in the Clear Wood Estimation of the Beech tree trunk(Fagus orientalis Libsky) [Volume 10, Issue 1, 2019, Pages 11-19]
-
Beech
The effect of electric shock on the physical and mechanical properties of beech wood [Volume 11, Issue 3, 2020, Pages 355-363]
-
Beech
Modification of The Beech (Fagus orientalis) Wood Properties via Electricity [Volume 13, Issue 1, 2022, Pages 27-35]
-
Beech and paulownia
Collapsibility and Wettability of Hydrothermally Treated Wood [Volume 3, Issue 1, 2013, Pages 1-11]
-
Beech and Popular
Effect of Faces Type and Thickness on Mechanical Properties
of Sandwich Panels [Volume 5, Issue 1, 2014, Pages 85-92]
-
Beech veneer
Study on Flexural Creep Parameters of Overlayed Particleboard by Natural and Melaminated Veneers [Volume 3, Issue 1, 2013, Pages 119-128]
-
Beech wood
The Investigation of Acoustic Properties of Carbon Fiber-Polyester Composites and Comparing the Results with Poplar, Walnut and Beech Wood Specimens [Volume 1, Issue 2, 2011, Pages 83-101]
-
Beech wood
Improving Weathering Performance of Beech Wood Coated with Acrylic Paint by nano zinc oxide and nano cellulose [Volume 10, Issue 2, 2019, Pages 311-321]
-
Behbahan
Survey on public awareness and participation in waste separation from Behbahan city [Volume 11, Issue 2, 2020, Pages 269-279]
-
Bending moment
capacity
Effect of shoulder thickness on bending moment capacity of mortise and loose
tenon joint [Volume 4, Issue 1, 2013, Pages 65-75]
-
Bending stiffness
Production of Multi-ply Paperboard from Old Corrugated Container Pulp and Application of Fine Materials in the Middle Layer [Volume 11, Issue 1, 2020, Pages 109-119]
-
Bene gum
Effect of Bene gum on the physical and mechanical properties of oil-heat treated wood [Volume 8, Issue 3, 2017, Pages 361-373]
-
Bethel method
Study on the potential use of nano-wollastonite to improve the fire resistance and dimensional stability of poplar wood (Populus nigra) [Volume 4, Issue 2, 2013, Pages 1-10]
-
Bilayer scaffold
Fabrication of Bilayer Nanocellulosic Aerogel Scaffold and Evaluation of Its Properties for Skin Tissue engineering [Volume 10, Issue 2, 2019, Pages 287-296]
-
Binder
The Study of mechanical and morphological properties of recycled polyethylene/saw dust from cutting of MDF composites [Volume 8, Issue 2, 2017, Pages 185-195]
-
Biochemistry
Effect of drought, fertilization, wounding and bending treatments on lignin content and composition of eucalyptus seedlings (Eucalyptus camaldulensis) [Volume 11, Issue 4, 2020, Pages 553-569]
-
Biocomposite
Thermal and colorimetry properties of bleached wheat straw/LDPE biocomposites [Volume 7, Issue 2, 2016, Pages 283-295]
-
Biocomposite
The Effect of wheat straw particle size on the mechanical and water absorption properties of wheat straw/low density polyethylene biocomposites for packaging applications [Volume 8, Issue 2, 2017, Pages 253-265]
-
Biodegradability
Biodegradation behaviors and color change of composites based on type of bagasse pulp/polylactic acid [Volume 8, Issue 1, 2017, Pages 1-13]
-
Biodegradability
Study of Biodegradability and Mechanical Properties of Polyvinyl Alcohol (PVA) Reinforced Celloluse Nanofiber (CNF) [Volume 8, Issue 4, 2017, Pages 497-508]
-
Biodegradability
Investigation of biodegradability behavior, thermal properties and morphology of poly caprolactone/ poly lactic acod/ crystal nanocellulose nanocomposites [Volume 12, Issue 3, 2021, Pages 363-374]
-
Biodegradability
Investigating the resistance and optical properties of papers coated with carboxymethyl cellulose and montmorillonite combination [Volume 14, Issue 2, 2023, Pages 215-226]
-
Biodegradable
Assesement of the Biodegradability of Composites produced from Poly-Lactic Acid and Bamboo Flour [Volume 9, Issue 4, 2018, Pages 537-548]
-
Biodegradable Coating
The effect of corn zein coating on the strength and barrier properties of liner paper [Volume 13, Issue 2, 2022, Pages 213-223]
-
Biodegradable foam
Investigation of the physical, mechanical and morphological properties of the foam obtained from polylactic acid and microcrystalline cellulose [Volume 14, Issue 4, 2023, Pages 403-413]
-
Biodegradation
Biodegradation behaviors of cellulose nanocrystals -PVA nanocomposites [Volume 5, Issue 2, 2014, Pages 1-13]
-
Biofuel briquette
Application of micrometer and nanometer binders to improve the properties of biofuel briquettes [Volume 11, Issue 1, 2020, Pages 133-145]
-
Biohydrogel
Nanocellulose based biohydrogel: Preparation and characterization of some properties [Volume 9, Issue 4, 2018, Pages 497-509]
-
Biological adsorption
Evaluation of lignocellulose Nano-fiber absorbent efficacy in lead removal from aqueous solutions [Volume 9, Issue 2, 2018, Pages 251-262]
-
Biomass
Effect of Hot water and dilute acid pretreatment on the chemical properties of liquorice root [Volume 7, Issue 1, 2016, Pages 129-140]
-
Biomass
Comparison of non-woody biomass properties for energy generation [Volume 10, Issue 4, 2019, Pages 617-628]
-
Biometric properties
Effect of altitude on biometric, physical and mechanical properties of caucasian alder species (Case study in Savadkuh region) [Volume 13, Issue 2, 2022, Pages 239-248]
-
Bio-polymer
Effects of cellulose nano crystal addition on the properties of polyhydroxybutyrate-co-valerate (PHBV) films [Volume 10, Issue 1, 2019, Pages 153-164]
-
Bio- Resin
Investigating the thermal properties of bio -adhesive tanic acid and gallic acid with furfural [Volume 14, Issue 1, 2023, Pages 55-63]
-
Bio solid fuel
Effect of using Almond shell flour and OCC on the properties of the production briquette [Volume 14, Issue 4, 2023, Pages 415-431]
-
Birch
The effect of heat treatment on anatomical, physical, color and mechanical properties of birch wood [Volume 13, Issue 4, 2022, Pages 519-529]
-
Birch Specie
Reviewing effect utilization of birch species in optical and mechanical pulp & CMP properties from MWPI. [Volume 6, Issue 2, 2015, Pages 275-284]
-
Biscuit joints
Investigating the stress carrying capacity of miter corner joints made with biscuit under diagonal tension and compression loading [Volume 10, Issue 3, 2019, Pages 323-336]
-
Biscuit joints
The investigation of the affecting factors on withdrawal resistance of the wooden biscuit joints [Volume 11, Issue 1, 2020, Pages 121-131]
-
Bleachability
Investigation on the bleachability of hemicellulase-deinked pulp versus chemical deinking process [Volume 13, Issue 3, 2022, Pages 289-300]
-
Bleached paper-grade pulp
Using of xylanase and cold caustic extraction to remove hemicellulose from bagasse bleached pulp for dissolving pulp production [Volume 10, Issue 1, 2019, Pages 1-9]
-
Bleaching
Characterization and Removal of Resins from Mixed Tropical Hardwoods Kraft Pulp [Volume 1, Issue 1, 2011, Pages 44-56]
-
Bleaching
Thermal and colorimetry properties of bleached wheat straw/LDPE biocomposites [Volume 7, Issue 2, 2016, Pages 283-295]
-
Bleaching
Use of titanium dioxide nanoparticles and aqueous methylene blue on ECF bleaching of bagasse pulp [Volume 11, Issue 2, 2020, Pages 211-224]
-
BMIMCl
Dissolution and regeneration of lignocellulosic materials with ionic liquids
BMIMCl and ([BMIM] [MeSO4]) and determination some of mechanical and
physical properties [Volume 4, Issue 1, 2013, Pages 117-130]
-
Board density
Investigation the Effect of Increasing Board Density and Amount of UF Resin on Particleboard Properties [Volume 2, Issue 1, 2011, Pages 103-112]
-
Borates
Borates and their applications to preserve wood-based composites [Volume 9, Issue 3, 2018, Pages 411-428]
-
Bound test
Analysis of Import Demand Function of Iranian Paper and Paperboard Using Bond Test [Volume 11, Issue 3, 2020, Pages 457-469]
-
Brake pads
Investigation of using rice hask and paper waste to make free copper brake lining [Volume 11, Issue 4, 2020, Pages 571-583]
-
Branch wood
The Comparison of Kraft Pulp Properties from Stem and
Branchwood of Hornbeam [Volume 5, Issue 1, 2014, Pages 139-152]
-
Breaking length
Investigation on anatomical, chemical and pulping characteristics
of Silybum marianum stem [Volume 4, Issue 2, 2013, Pages 59-68]
-
Broke fibers
Modification of NSSC pulp broke fibers using layering method and investigating its effect on paper properties [Volume 7, Issue 3, 2016, Pages 413-423]
-
Bulk flow
Tracking and Simulation of Dry Shell Formation in a Wood Drying Process by X-ray Spectroscopy [Volume 1, Issue 2, 2011, Pages 1-11]
-
Burning dressing
Investigation of releasing mechanism of silver nitrate in the nanocellulose based hydrogel pad for burn healing [Volume 11, Issue 2, 2020, Pages 333-344]
-
Burr formation
Study on Influensive Factors on Surface Quality and Edges of Through- Holes Bored in Particleboard and MDF [Volume 3, Issue 1, 2013, Pages 67-79]
-
Butt joint
Investigating the Stress Carrying Capacity of Corner Joints In The
Furniture Frame Fabricated With Dowel [Volume 5, Issue 1, 2014, Pages 21-32]
-
Buying
Investigating the Effective Index on Customers Choice in Buying Furniture [Volume 5, Issue 1, 2014, Pages 153-164]
C
-
Calcite
Cationic precipitated calcium carbonate (PCC) synthesis using simultaneous modification [Volume 11, Issue 1, 2020, Pages 33-43]
-
Calcium Hydroxide
EFFECT OF DRY- HEAT AND MOIST-HEAT AGING ON PROPERTIES OF PAPERS TREATED WITH NANO CALCIUM HYDROXIDE AND NANO CHITOSAN [Volume 9, Issue 2, 2018, Pages 277-288]
-
Calcium Hydroxide
Environmental and strength properties evaluation of bleached recycled pulp with calcium hydroxide [Volume 13, Issue 1, 2022, Pages 71-81]
-
Calcium scale
Environmental and strength properties evaluation of bleached recycled pulp with calcium hydroxide [Volume 13, Issue 1, 2022, Pages 71-81]
-
Canola Stalk
Investigation on the Potential of Using the Residual Fibers from Fractionation of Canola Stalk with Glycerol in Pulp Production [Volume 14, Issue 2, 2023, Pages 139-153]
-
Canola stalks
The influence of treatment and shelling ratio on the mechanical properties of particleboard manufactured from Canola (Brassica napus) stalk particles [Volume 7, Issue 2, 2016, Pages 255-270]
-
Canola Stem Flour
Effect of poly lactic acid on physical and mechanical properties of wood plastic composite [Volume 10, Issue 2, 2019, Pages 261-272]
-
Carbon dioxide
Recovery of lignin from Kraft black liquor in the methods oxygen and carbon dioxide pretreatment from hardwood Kraft black liquor [Volume 12, Issue 2, 2021, Pages 235-246]
-
Carbon dioxide (CO2)
An overview of the properties of nanofilters derived from cellulose nanofibers for the adsorption of air pollutants [Volume 11, Issue 3, 2020, Pages 497-511]
-
Carbon fiber
The Investigation of Acoustic Properties of Carbon Fiber-Polyester Composites and Comparing the Results with Poplar, Walnut and Beech Wood Specimens [Volume 1, Issue 2, 2011, Pages 83-101]
-
Carbon monoxide
The use of cellulose nanofibers to reduce harmful substances from cigarette smoke [Volume 11, Issue 1, 2020, Pages 19-31]
-
Carboxyl groups
Effect of the addition of citric acid on particleboard properties [Volume 10, Issue 1, 2019, Pages 89-99]
-
Carboxy methyl cellulose
Evaluation of antibacterial performance of iron oxide nanoparticles stabilized by biodegradable lignocellulosic materials [Volume 12, Issue 3, 2021, Pages 337-350]
-
Carboxymethyl cellulose
Investigating the resistance and optical properties of papers coated with carboxymethyl cellulose and montmorillonite combination [Volume 14, Issue 2, 2023, Pages 215-226]
-
Carboxymethylcellulose
Carboxymethyl Cellulose (CMC) Preparation from Mixed Office Wastepaper Deinked and Bleached Bagasse pulps: Characterization and Comparison [Volume 7, Issue 3, 2016, Pages 311-321]
-
Carboxy-Methyl Cellulose
Hydrogel composite based on thermal modified carboxymethyl cellulose and nanozeolite [Volume 13, Issue 4, 2022, Pages 433-443]
-
Carpinus betulus
Papermaking Properties of Carpinus betulus with kraft, Soda and Soda-Urea Pulping Processes [Volume 3, Issue 2, 2013, Pages 105-117]
-
Catalyzer
Evaluation of Pulp and Paper Properties obtained from Maple Juvenile Wood through Organosolv Alcohol Method Catalyzed by Calcium and Magnesium Salts [Volume 6, Issue 1, 2015, Pages 31-40]
-
Cationisation
Effect of Cationised Long Fibers as Additive On Mechanical Properties of CMP [Volume 4, Issue 1, 2013, Pages 161-170]
-
Caucasian alder
Effect of altitude on biometric, physical and mechanical properties of caucasian alder species (Case study in Savadkuh region) [Volume 13, Issue 2, 2022, Pages 239-248]
-
Celloluse nanocrystalline
Application of acetylated nanocrystalline cellulose in modified soy-based adhesive for plywood [Volume 8, Issue 1, 2017, Pages 79-94]
-
Cellulose
Production of Nanocellulose from Rice Husk [Volume 4, Issue 2, 2013, Pages 153-163]
-
Cellulose
Cellulose nanocrystal properties and their applications [Volume 6, Issue 1, 2015, Pages 167-192]
-
Cellulose
Cellulose Extraction from Spirulina Wastes (Spirulina platensis) and Isolation of Cellulose Nanofiber from it [Volume 9, Issue 2, 2018, Pages 301-311]
-
Cellulose
The effect of submicron cellulose binder on the properties of briquettes made from bagasse and rapeseed [Volume 14, Issue 3, 2023, Pages 243-251]
-
Cellulose Fiber
The effect of residual xylan on cellulose nanofiber production through electrospinning of wheat straw [Volume 10, Issue 4, 2019, Pages 543-558]
-
Cellulose industry wastewater
Performance of perlite as an adsorbent on the physical treatment of cellulose industry wastewater [Volume 13, Issue 3, 2022, Pages 313-323]
-
Cellulose modification
A novel method for cellulose modification in aqueous media via alkoxysilane chemistry [Volume 7, Issue 3, 2016, Pages 463-474]
-
Cellulose Nanocrystal
Effects of cellulose nano crystal addition on the properties of polyhydroxybutyrate-co-valerate (PHBV) films [Volume 10, Issue 1, 2019, Pages 153-164]
-
Cellulose nanocrystals
Biodegradation behaviors of cellulose nanocrystals -PVA nanocomposites [Volume 5, Issue 2, 2014, Pages 1-13]
-
Cellulose nanocrystals
Effects of Modified Iron Oxide Nanoparticles on the Thermal and Dynamic Mechanical Properties of Cellulose Poly(vinyl alcohol) Blend Films [Volume 6, Issue 2, 2015, Pages 251-263]
-
Cellulose nanocrystals
Investigation of resistance and optical properties of the papers treated with cellulose nanocrystals and zinc oxide nanoparticles [Volume 10, Issue 3, 2019, Pages 407-415]
-
Cellulose nanocrystals
Recycling of waste MDF via digester and production of nanocrystalline cellulose from recycled fibers [Volume 12, Issue 2, 2021, Pages 271-282]
-
Cellulose nanocrystals
Effects of maleic anhydride and oxidizer on mechanical and contact angle of polypropylene and cellulose nanocrystals composites. [Volume 12, Issue 2, 2021, Pages 299-307]
-
Cellulose nanocrystals
Surface modification of cellulose nanocrystals using radio-frequency plasma [Volume 13, Issue 1, 2022, Pages 49-60]
-
Cellulose nanofiber
Effect of Mixing Temperature of CMP Pulp and Cellulose Nanofiber on Paper Properties [Volume 3, Issue 2, 2013, Pages 77-90]
-
Cellulose nanofiber
Fabrication and properties evaluation of three layered transparent nanocomposite reinforced with cellulose and chitin nanofibers [Volume 10, Issue 4, 2019, Pages 495-505]
-
Cellulose Nano Fiber
The use of cellulose nanofibers to reduce harmful substances from cigarette smoke [Volume 11, Issue 1, 2020, Pages 19-31]
-
Cellulose nanofiber (CNF)
Fabrication of Bilayer Nanocellulosic Aerogel Scaffold and Evaluation of Its Properties for Skin Tissue engineering [Volume 10, Issue 2, 2019, Pages 287-296]
-
Cellulose nano-fibers
Application of cellulosic nanofibers to replace with imported long- fiber pulps in paper made from bagasse [Volume 7, Issue 4, 2016, Pages 523-536]
-
Cellulose Nano fibers
Effect Of Paper Deacidification With Nano Calcium Hydroxide and Nano Hydroxyapatite, With Nano Cellulose And Nano Chitosan On Its Anti-Fungal Properties [Volume 9, Issue 1, 2018, Pages 53-63]
-
Cellulose Nanofibers
Study of Biodegradability and Mechanical Properties of Polyvinyl Alcohol (PVA) Reinforced Celloluse Nanofiber (CNF) [Volume 8, Issue 4, 2017, Pages 497-508]
-
Cellulose Nanofibers
Cellulose Extraction from Spirulina Wastes (Spirulina platensis) and Isolation of Cellulose Nanofiber from it [Volume 9, Issue 2, 2018, Pages 301-311]
-
Cellulose Nanofibers
Effect of Applying Cellulose Nanofibers on the Properties of Multiply Paper Made from Recycled Fibers [Volume 9, Issue 3, 2018, Pages 359-369]
-
Cellulose Nanofibers
Effect of dissolution time and recycled solvent on the nanowelding process of cellulose nanofiber [Volume 11, Issue 3, 2020, Pages 395-405]
-
Cellulose Nanofibers
Influence of the cellulose nanofibers on optical and mechanical strength of the historical paper relics [Volume 11, Issue 4, 2020, Pages 683-692]
-
Cellulose Nanofibers
The effect of cellulose nanofibers on the function of starch sizing used in historical paper relics [Volume 12, Issue 1, 2021, Pages 17-28]
-
Cellulose Nanofibers
An overview of the properties of nanofilters derived from cellulose nanofibers for the adsorption of air pollutants [Volume 11, Issue 3, 2020, Pages 497-511]
-
Cellulose Nanofibers
Cellulose nanofibers made from waste printing and writing papers and its effect on the properties of recycled paper [Volume 12, Issue 2, 2021, Pages 185-194]
-
Cellulose Nanofibers
The effect of different additives on the properties of handsheet prepared from office waste paper [Volume 13, Issue 2, 2022, Pages 119-131]
-
Cellulose nanofibers (CNF)
The investigation of the spraying of cellulose nanofibers (CNF) and Nano chitosan on the properties writing & printing (W&P) Paper [Volume 10, Issue 2, 2019, Pages 249-260]
-
Cellulose nanofibers (CNFs)
The Effect of Concentration of Modified Cellulose NanoFibers by phthalimide on the Adsorption Rate of Carbon Dioxide (CO2) [Volume 10, Issue 3, 2019, Pages 397-406]
-
Cellulose nanofibrils
The effect of different drying methods on cellulosic nanofibers and resulting composites [Volume 6, Issue 2, 2015, Pages 285-298]
-
Cellulose Nitrate- Acetate
Synthesizing and Producing of Low Sensitive Nitrocellulose with Acetylation Method [Volume 10, Issue 2, 2019, Pages 175-187]
-
Cellulosic binders
Application of micrometer and nanometer binders to improve the properties of biofuel briquettes [Volume 11, Issue 1, 2020, Pages 133-145]
-
Cellulosic waste
Investigation of using rice hask and paper waste to make free copper brake lining [Volume 11, Issue 4, 2020, Pages 571-583]
-
Cement
Investigation of the effect of nano-silica deposition on cellulose fibers , the mechanical properties of autoclaved cement composites in industrial scale [Volume 12, Issue 3, 2021, Pages 419-428]
-
Cement-bonded Particleboard
Optimization of properties of cement-bonded particleboard manufactured from cotton stalk and sawdust containing calcium chloride CaCl2 as an additive [Volume 7, Issue 1, 2016, Pages 55-68]
-
Challenges
Evaluation of challenges of wood imports to Iran using Fuzzy Delphi Analytical Hierarchy Process [Volume 8, Issue 2, 2017, Pages 159-169]
-
Characterization
Cellulose nanocrystal properties and their applications [Volume 6, Issue 1, 2015, Pages 167-192]
-
Chemical
Production of Nanocellulose from Rice Husk [Volume 4, Issue 2, 2013, Pages 153-163]
-
Chemical characteristics
Investigation on anatomical, chemical and pulping characteristics
of Silybum marianum stem [Volume 4, Issue 2, 2013, Pages 59-68]
-
Chemical components
Study of Chemical Components and Bioactive Properties of Knot wood Extractives from Four Endemic Species of Hyrcanian Forests [Volume 8, Issue 1, 2017, Pages 53-66]
-
Chemical compounds
Investigation on the Fiber Biometry and Chemical Compounds of Bast and without Bast Stalk of Cotton Stalk Sahel Variety [Volume 2, Issue 1, 2011, Pages 91-101]
-
Chemical Foaming Agent
Investigation on the Effect of Chemical Foaming agent and Wood Flour content on Mechanical Properties, Density and Cell morphology of HDPE/EVA/ Wood Flour Hybrid Foamed Composites [Volume 2, Issue 1, 2011, Pages 63-80]
-
Chemical-mechanical pulp (CMP) from Hardwoods
Effect of the addition of bagasse and imported long fiber chemical pulps on the properties of chemical-mechanical pulp produced from hornbeam, beech and poplar mixture [Volume 10, Issue 1, 2019, Pages 143-152]
-
Chemical mixing
Effect of Lignin Mixing Method on Physical and Mechanical Properties of Wood Flour- Polypropylene Composites [Volume 1, Issue 2, 2011, Pages 103-113]
-
Chemical modification
Comparison the performance of different catalysts in chemical modification of Poplar wood with Glutaraldehyde [Volume 7, Issue 3, 2016, Pages 363-375]
-
Chemical oxygen demand (COD)
The Effect of Preheating Treatment and non-simultaneous Addition of Chemicals on the Efficiency of Hydrogen Peroxide Bleaching of Chemi-mechanical pulp(CMP) [Volume 1, Issue 2, 2011, Pages 27-36]
-
Chemical oxygen demand (COD)
Performance of perlite as an adsorbent on the physical treatment of cellulose industry wastewater [Volume 13, Issue 3, 2022, Pages 313-323]
-
Chemical oxygen demand (COD) of wastewater
Environmental and strength properties evaluation of bleached recycled pulp with calcium hydroxide [Volume 13, Issue 1, 2022, Pages 71-81]
-
Chemical treatment
The effect of chemical treatment and compression percent on mechanical properties of Paulownia compressed wood [Volume 5, Issue 2, 2014, Pages 59-70]
-
Chemical treatment of wood flour
The effect of chemical treatment of wood flour on some of properties of wood plastic composite [Volume 7, Issue 3, 2016, Pages 449-462]
-
Chemi-Mechanical pulp and bleached Kraft pulp
effect of cellulase on drainage and strength properties of virgin and recycled pulps [Volume 12, Issue 2, 2021, Pages 207-215]
-
Chemi-mechanical pulp and Physical and strength properties of paper
Effect of Mixing Temperature of CMP Pulp and Cellulose Nanofiber on Paper Properties [Volume 3, Issue 2, 2013, Pages 77-90]
-
Chemi-Mechanical Pulp (CMP)
Improvement of wet and dry layer strengths of paper from chemi-mechanical pulp using polyamide epichlorohydrin and cellulose nanofibers vs imported long fiber Kraft pulp [Volume 11, Issue 4, 2020, Pages 627-643]
-
Chemi-mechanical pulp، Hydrogen peroxide، Preheating treatment، non-simultaneous addition of bleaching chemicals
The Effect of Preheating Treatment and non-simultaneous Addition of Chemicals on the Efficiency of Hydrogen Peroxide Bleaching of Chemi-mechanical pulp(CMP) [Volume 1, Issue 2, 2011, Pages 27-36]
-
Chips
Study on Influensive Factors on Surface Quality and Edges of Through- Holes Bored in Particleboard and MDF [Volume 3, Issue 1, 2013, Pages 67-79]
-
Chitosan
Effect of chitosan-nanosilica self-assembly layers chitosan- on
cotton linter fibers and the paper properties [Volume 5, Issue 2, 2014, Pages 81-92]
-
Chitosan
Performance of Nano Fibrillated Cellulose (NFC) and Chitosan Bio-polymeric System on Recycled Pulp and Paper Properties of Old Corrugated Containers (OCC) [Volume 7, Issue 2, 2016, Pages 297-309]
-
Chitosan
Production of zein, chitosan, nanocellulose Nanocomposite , dynamic analysis and glass transition temperature [Volume 8, Issue 3, 2017, Pages 471-481]
-
Chitosan
Effect Of Paper Deacidification With Nano Calcium Hydroxide and Nano Hydroxyapatite, With Nano Cellulose And Nano Chitosan On Its Anti-Fungal Properties [Volume 9, Issue 1, 2018, Pages 53-63]
-
Chitosan
EFFECT OF DRY- HEAT AND MOIST-HEAT AGING ON PROPERTIES OF PAPERS TREATED WITH NANO CALCIUM HYDROXIDE AND NANO CHITOSAN [Volume 9, Issue 2, 2018, Pages 277-288]
-
Chitosan
Effect of Chitosan Electrostatic Charge on the Performance of Chitosan-Nanosilica in Recycled Old Corrugated Container Pulp [Volume 9, Issue 3, 2018, Pages 459-469]
-
Chitosan
Using Zeolite as a Filler with Chitosan Biopolymer in Papermaking [Volume 11, Issue 3, 2020, Pages 407-417]
-
Chitosan
Evaluation of Strength, Optical and Antibacterial Properties of Treated Papers by Chitosan and Nano Zinc Oxide [Volume 12, Issue 1, 2021, Pages 145-162]
-
Chitosan
The Influence of Mixing Method of lignocellulosic Nanofibers with Recycled Pulp in the Presence of Microparticle System on the Final Paper Properties [Volume 13, Issue 1, 2022, Pages 103-113]
-
Chitosan- Pomegranate Peel Extract Nanocapsule
Improving the Antibacterial Effect of Pomegranate Peel Extract with Nano-chitosan Using Encapsulation Technique in Sanitary Papermaking [Volume 11, Issue 4, 2020, Pages 513-532]
-
Chlorophytum comosum plant extract
Influence of additive of Chlorophytum comosum plant extract on physicochemical, structural and mechanical properties of urea formaldehyde resin [Volume 13, Issue 3, 2022, Pages 361-373]
-
Citric acid
Effect of the addition of citric acid on particleboard properties [Volume 10, Issue 1, 2019, Pages 89-99]
-
Cleaner production
Determination and ranking cleaner production criteria by using analytic hierarchy process (Case study: Latif paper products company) [Volume 8, Issue 4, 2017, Pages 573-584]
-
Cleaner production
Identification of Cleaner Production criteria at Kimia Choob Medium Density Fiber Board [Volume 11, Issue 2, 2020, Pages 225-240]
-
Clear paints
Investigation on the Scratch Strength of Clear Paints Used in Furniture Industries on the Wood Species Beech, Elm, Alder and Spruce [Volume 5, Issue 1, 2014, Pages 33-44]
-
Clear wood
Comparison Study in the Clear Wood Estimation of the Beech tree trunk(Fagus orientalis Libsky) [Volume 10, Issue 1, 2019, Pages 11-19]
-
Cluster development
Evaluation of the geographical concentration of furniture industry in Iran with the aim of furniture cluster development [Volume 4, Issue 2, 2013, Pages 33-44]
-
CMC
Improving wet tensile strength of paper glass using PAE, CNF and CMC [Volume 9, Issue 2, 2018, Pages 163-173]
-
CMP
Influence of Recycling on Chemical Properties and Hornification of CMP and [Volume 3, Issue 1, 2013, Pages 99-108]
-
CMP
Effect of Cationised Long Fibers as Additive On Mechanical Properties of CMP [Volume 4, Issue 1, 2013, Pages 161-170]
-
CMP
Reviewing effect utilization of birch species in optical and mechanical pulp & CMP properties from MWPI. [Volume 6, Issue 2, 2015, Pages 275-284]
-
CMP pulp
The effect of cellulose nano-fibers and Cationic starch on optical and mechanical properties of chemi-mechanical pulp [Volume 11, Issue 3, 2020, Pages 445-456]
-
CNC
Study on Influensive Factors on Surface Quality and Edges of Through- Holes Bored in Particleboard and MDF [Volume 3, Issue 1, 2013, Pages 67-79]
-
CNF
Improving wet tensile strength of paper glass using PAE, CNF and CMC [Volume 9, Issue 2, 2018, Pages 163-173]
-
Coating
The effect of biodegradable coatings on the barrier properties of papers [Volume 7, Issue 1, 2016, Pages 91-101]
-
Coating
The effect of coatings and coating weight by two types of PCC on barrier and optical properties and roughness of paper [Volume 8, Issue 2, 2017, Pages 283-295]
-
Coating
Microscopic investigation on the effects of wood surface modification with sol-gel method on the quality of polyurethane and alkyd coatings [Volume 8, Issue 4, 2017, Pages 509-520]
-
Coating
The Effect of layers made off clear coats on the color changes and surface quality of wood after accelerated weathering in urban furniture [Volume 9, Issue 4, 2018, Pages 561-574]
-
Coating
The investigation of the spraying of cellulose nanofibers (CNF) and Nano chitosan on the properties writing & printing (W&P) Paper [Volume 10, Issue 2, 2019, Pages 249-260]
-
Coating
Effect of calendering on physical and mechanical properties of coated papers [Volume 10, Issue 2, 2019, Pages 273-285]
-
Coating
Investigation of the effect of palm texture densification on surface properties and coating quality with water-based and solvent-based coatings for use in furniture [Volume 11, Issue 3, 2020, Pages 419-431]
-
Coating
Study of antibacterial activity and other properties of paper coated by selenium nanoparticles [Volume 12, Issue 1, 2021, Pages 29-44]
-
Coating
The investigation of surface properties of Populus nigra wood coated with silica nanoparticles [Volume 12, Issue 1, 2021, Pages 133-143]
-
Coating
The Effect of spray coating and freezing of brown liner paper on its physical and mechanical properties [Volume 14, Issue 1, 2023, Pages 31-40]
-
Coating
Investigation on coating of paper with biodegradable polymers and Zinc Oxide nanoparticles on its mechanical and barrier properties [Volume 14, Issue 1, 2023, Pages 97-111]
-
Coating
Investigating the resistance and optical properties of papers coated with carboxymethyl cellulose and montmorillonite combination [Volume 14, Issue 2, 2023, Pages 215-226]
-
Coating of paper
study of antibacterial effects and physical characters of paper coated with nanoclay and homogenized nanoclay [Volume 7, Issue 4, 2016, Pages 561-572]
-
Coating Polymer
Cellulose coating on Poly (Ethylene Terephthalate) yarn [Volume 11, Issue 4, 2020, Pages 533-541]
-
COD
Investigation of Electro coagulation Process on TSS and COD Removal from Effluent of the Paper Recycling Mill Using Al Electrodes [Volume 3, Issue 2, 2013, Pages 53-64]
-
COD
Effect of structural characteristics of process water on paper properties made from recycled fiber [Volume 10, Issue 3, 2019, Pages 337-346]
-
Cold plasma
Identifying the effect of plasma treatment on the palm texture with application attitude in the furniture industry [Volume 12, Issue 1, 2021, Pages 109-120]
-
Collapsibility
Collapsibility and Wettability of Hydrothermally Treated Wood [Volume 3, Issue 1, 2013, Pages 1-11]
-
Colloidal nano silver- hydrothermal
The effect of combined colloidal nano silver-hydrothermal treatment on weight changes and chemical structure of beech wood (Fagus orientalis) [Volume 6, Issue 1, 2015, Pages 109-118]
-
Colorimetric properties
Thermal and colorimetry properties of bleached wheat straw/LDPE biocomposites [Volume 7, Issue 2, 2016, Pages 283-295]
-
Combined Hygro-Thermo-Mechanical Treatment (CHTMT)
The effect of hygro-thermo-mechanical modification on the applied properties of glulam made from poplar [Volume 11, Issue 2, 2020, Pages 241-253]
-
Compatibilizer
Effect of Lignin Mixing Method on Physical and Mechanical Properties of Wood Flour- Polypropylene Composites [Volume 1, Issue 2, 2011, Pages 103-113]
-
Compatibilizer
Effect of Impact Modifier Type on Water Absorption and Thickness Swelling Parameters of Wood Flour- Recycled Polypropylene Composites [Volume 2, Issue 2, 2011, Pages 115-24]
-
Compatibilizer
A Study on Creep Behavior of Wood Flour- Recycled Polypropylene Composite [Volume 3, Issue 2, 2013, Pages 1-12]
-
Compatibilizer
The effect of using the textile waste fibers and nanoclay particles on physical and mechanical properties of composite made from wood flour/polypropylene [Volume 6, Issue 1, 2015, Pages 1-12]
-
Compatibilizer
Investigating the bending creep behavior of poplar wood plastic plywood manufactured by thermoplastic films [Volume 13, Issue 4, 2022, Pages 393-403]
-
Competitiveness
Analysis of effective indicators and solutions on the competitiveness of Iran's multi-purpose furniture market [Volume 14, Issue 2, 2023, Pages 127-138]
-
Composite
Minimizing hot-press time in the manufacturing process
of wood plastic composites [Volume 4, Issue 2, 2013, Pages 79-90]
-
Composite
Investigating on Effect of Particle Form and Mixing Method on
applied Properties Green Composite [Volume 5, Issue 1, 2014, Pages 63-74]
-
Composite
A Study on Creep Behavior of a Wood Flour-Polypropylene-Nanoclay Hybrid Composite [Volume 7, Issue 1, 2016, Pages 1-12]
-
Composite
Comparative investigation of treated bagasse and rice straw on physical and mechanical properties of natural fiber reinforced composites (NFRC) [Volume 8, Issue 3, 2017, Pages 453-469]
-
Composite
Production of zein, chitosan, nanocellulose Nanocomposite , dynamic analysis and glass transition temperature [Volume 8, Issue 3, 2017, Pages 471-481]
-
Composite
Investigation of physical and mechanical performance of wood-based composites after laboratory accelerated aging [Volume 9, Issue 1, 2018, Pages 103-117]
-
Composite
Effect of poly lactic acid on physical and mechanical properties of wood plastic composite [Volume 10, Issue 2, 2019, Pages 261-272]
-
Composite
Effects of maleic anhydride and oxidizer on mechanical and contact angle of polypropylene and cellulose nanocrystals composites. [Volume 12, Issue 2, 2021, Pages 299-307]
-
Composite
Investigation of the effect of nano-silica deposition on cellulose fibers , the mechanical properties of autoclaved cement composites in industrial scale [Volume 12, Issue 3, 2021, Pages 419-428]
-
Composite
Investigating the characteristics of wood-plastic composites made from bagasse [Volume 14, Issue 3, 2023, Pages 271-283]
-
Comprehensive Industrial Concentration
Determination of Concentration Level and Market Analysis of Iran Particle Board Imports [Volume 11, Issue 4, 2020, Pages 611-626]
-
Compression parallel and perpendicular to the grain
Mechanical properties of Beech -Furfuryl alcohol wood polymer [Volume 4, Issue 2, 2013, Pages 131-140]
-
Compression set
The effect of hygro-thermo-mechanical modification on the applied properties of glulam made from poplar [Volume 11, Issue 2, 2020, Pages 241-253]
-
Compression strength parallel to grain
Influence of Heat Treatment Conditions on Strength Properties of Poplar Wood (Populus deltoides) [Volume 2, Issue 2, 2011, Pages 161-170]
-
Compressive strength
Construction of lightweight and resistant concrete with silica and wooden particles [Volume 8, Issue 4, 2017, Pages 585-603]
-
Concentration
The Effect of Concentration of Modified Cellulose NanoFibers by phthalimide on the Adsorption Rate of Carbon Dioxide (CO2) [Volume 10, Issue 3, 2019, Pages 397-406]
-
Concentration factor
Evaluation of the geographical concentration of furniture industry in Iran with the aim of furniture cluster development [Volume 4, Issue 2, 2013, Pages 33-44]
-
Concentration ratios
Determination of Concentration Level and Market Analysis of Iran Particle Board Imports [Volume 11, Issue 4, 2020, Pages 611-626]
-
Condence tannin
Investigation on the influence of pressing conditions on the properties of particleboard made from natural mimosa condensed tannins adhesive [Volume 6, Issue 2, 2015, Pages 193-201]
-
Connections
Study of Behavior and Measurement of Seismic Resistant Connections in Light Structural Frame Out of Aspen [Volume 3, Issue 1, 2013, Pages 81-97]
-
Conservation
Study of linseed oil on white poplar wood (Populus alba L.) as a traditional treatment for historical wooden relics against weathering [Volume 5, Issue 2, 2014, Pages 93-106]
-
Conservation
Investigation the effect of Thiophanate-methyl on the ageing of Gall ink of the historical papers
[Volume 12, Issue 2, 2021, Pages 195-205]
-
Consumers
Investigating the Effective Index on Customers Choice in Buying Furniture [Volume 5, Issue 1, 2014, Pages 153-164]
-
Contact angle
The Effect of Clear Paints, Nanozycofil and Nanozycosil on Water Absorption and Contact Angle of Poplar Wood [Volume 2, Issue 1, 2011, Pages 17-26]
-
Contact angle
Effect furfurylation on physical properties and surface quality of two species of Beech and Fir [Volume 7, Issue 3, 2016, Pages 400-411]
-
Contact angle
Effect of alum-dispersed rosin system on water absorption, strength and optical properties of papers made from recycled fibers [Volume 10, Issue 3, 2019, Pages 385-395]
-
Contact angle
Determination the optimal condition for surface modification of spruce wood with Rosin Maleic [Volume 11, Issue 4, 2020, Pages 657-668]
-
Contact angle
The effect of nano-SiO2 particles and film thickness on physical properties of transparent wood coatings [Volume 12, Issue 1, 2021, Pages 1-15]
-
Contact angle
Influence of poplar wood densification on surface characteristics and adhesion strength [Volume 12, Issue 4, 2021, Pages 537-550]
-
Contact angle
The effect of heat treatment on anatomical, physical, color and mechanical properties of birch wood [Volume 13, Issue 4, 2022, Pages 519-529]
-
Controlled release
Microencapsulation of Zataria multiflora thyme essential oil to improve its antifungal efficiency by controlled release mechanism [Volume 8, Issue 4, 2017, Pages 563-571]
-
Corn stalk
A Study on Physical and Mechanical Properties of Medium-Density Fiberboard (MDF) Made from Corn stalk and Wood fibers [Volume 2, Issue 2, 2011, Pages 39-52]
-
Cotton
Preparation and Characterization of Microcrystalline Cellulose (MCC)
from Kenaf and Cotton Stem [Volume 4, Issue 2, 2013, Pages 23-32]
-
Cotton fiber stem
The Infuence of Coupling Agent and the Content of Fibers on Tensile Strength and Physical Properties of Cotton Fiber Stem/Recycled Polypropylene Composites [Volume 3, Issue 2, 2013, Pages 131-140]
-
Cotton Stalk
Optimization of properties of cement-bonded particleboard manufactured from cotton stalk and sawdust containing calcium chloride CaCl2 as an additive [Volume 7, Issue 1, 2016, Pages 55-68]
-
Cotton Stalk Sahel Variety
Investigation on the Fiber Biometry and Chemical Compounds of Bast and without Bast Stalk of Cotton Stalk Sahel Variety [Volume 2, Issue 1, 2011, Pages 91-101]
-
Creep
A Study on Creep Behavior of Wood Flour- Recycled Polypropylene Composite [Volume 3, Issue 2, 2013, Pages 1-12]
-
Creep
A Study on Creep Behavior of a Wood Flour-Polypropylene-Nanoclay Hybrid Composite [Volume 7, Issue 1, 2016, Pages 1-12]
-
Creep
Study on long term creep of two different types of compressed wood sheets used in library shelves [Volume 7, Issue 3, 2016, Pages 437-447]
-
Creep
Simulation and prediction of bending performance of wood plastic composite profiles using finite element method by ANSYS Workbench software [Volume 13, Issue 3, 2022, Pages 325-344]
-
Creep
Investigating the bending creep behavior of poplar wood plastic plywood manufactured by thermoplastic films [Volume 13, Issue 4, 2022, Pages 393-403]
-
Criteria and Sub criteria
Determination and ranking cleaner production criteria by using analytic hierarchy process (Case study: Latif paper products company) [Volume 8, Issue 4, 2017, Pages 573-584]
-
Criteria and Sub-criteria
Determination of effective criteria on development of RTA Furniture Industry in Iran [Volume 7, Issue 1, 2016, Pages 13-32]
-
Cross-laminated timber
Strengthening of the cross-laminated timber using glass fiber-reinforced polymer on the lateral performance of the single shear lap joints [Volume 13, Issue 1, 2022, Pages 1-14]
-
Crosslink
Polyvinyl chloride coating with viscous cellulose [Volume 12, Issue 3, 2021, Pages 323-336]
-
Crude glycerol
Preparation of bio-polyols from lignocellulosic waste by liquefaction [Volume 9, Issue 3, 2018, Pages 313-321]
-
Crude oil
Study on the ability of lignocellulosic materials to absorb crude oil from aqueous media [Volume 11, Issue 2, 2020, Pages 255-267]
-
Cryptomeria Japonhca
Investigation on the possibility of Manufacturing the Kraft pulp from Criptomeria wood [Volume 6, Issue 1, 2015, Pages 145-157]
-
Crystallinity
The effect of residual xylan on cellulose nanofiber production through electrospinning of wheat straw [Volume 10, Issue 4, 2019, Pages 543-558]
-
Crystallinity amount
Preparation and Characterization of Microcrystalline Cellulose (MCC)
from Kenaf and Cotton Stem [Volume 4, Issue 2, 2013, Pages 23-32]
-
Crystallinity index
Influence of Recycling on Chemical Properties and Hornification of CMP and [Volume 3, Issue 1, 2013, Pages 99-108]
-
Crystallinity size
Preparation and Characterization of Microcrystalline Cellulose (MCC)
from Kenaf and Cotton Stem [Volume 4, Issue 2, 2013, Pages 23-32]
-
CT-Scan
Comparison Study in the Clear Wood Estimation of the Beech tree trunk(Fagus orientalis Libsky) [Volume 10, Issue 1, 2019, Pages 11-19]
-
Currency shocks
The Asymmetric Impacts of Currency Shocks on Wood Imports and Wood Products in Iran with Emphasis on the Environment of Shock Formation [Volume 11, Issue 4, 2020, Pages 585-598]
-
Customer Loyalty
Identifying and analyzing the factors affecting the loyalty of customers in the home furniture industry (case study: Rasht city) [Volume 14, Issue 1, 2023, Pages 17-30]
-
Cutting direction
Evaluation of wood machining parameters and surface quality in cutting process by water jet without abrasive material [Volume 12, Issue 3, 2021, Pages 429-440]
-
Cutting speed
Investigation and Evaluation on Influence of Machining (CNC) Conditions on Surface Quality of Paulownia Wood [Volume 2, Issue 2, 2011, Pages 1-13]
-
Cutting velocity
Evaluation of wood machining parameters and surface quality in cutting process by water jet without abrasive material [Volume 12, Issue 3, 2021, Pages 429-440]
D
-
Damage assessment
Life cycle assessment of SMF and GMF Fluting paper production process [Volume 13, Issue 3, 2022, Pages 249-259]
-
Damping of sound
Study on the Possibility of Using Sunflower Stalk in Particleboard Production [Volume 2, Issue 2, 2011, Pages 83-97]
-
Data Palm
Investigation of the use of tetramethyl orthosilicate (Alkoxysilane) on compatibility, mechanical and physical properties of wood-cement particleboard [Volume 13, Issue 4, 2022, Pages 419-431]
-
Date wastes
Technical evaluation of pure and combined glulam beams based on LSL made from date palm rachies [Volume 14, Issue 3, 2023, Pages 253-269]
-
DEAMATEL techniques mutual interaction
Investigating the effectiveness and impact of factors affecting the growth and economic development of the classical furniture industry (Case study: Tehran province) [Volume 11, Issue 2, 2020, Pages 281-292]
-
Debarking
The effect of the presence of skin on the mechanical properties of milkweed wood flour-plastic composite [Volume 10, Issue 1, 2019, Pages 115-124]
-
Decay
Comparing the effect of cell wall modification with glycidyl methacrylate and maleic anhydride on the physical, mechanical and biological properties of poplar wood-styrene polymer composite [Volume 12, Issue 2, 2021, Pages 259-270]
-
Decay
Investigation of the Natural Durability of Beech Wood by Meyer-Veltrup Model [Volume 14, Issue 4, 2023, Pages 377-387]
-
Defect detection
A New Method for Defect Detection on Images Captured from Wood Veneer: Optimization of Energy Function on Natural Texture Eliminated Image [Volume 6, Issue 2, 2015, Pages 299-309]
-
Degree of polymerization
Use of titanium dioxide nanoparticles and aqueous methylene blue on ECF bleaching of bagasse pulp [Volume 11, Issue 2, 2020, Pages 211-224]
-
Degree of polymerization
Modeling and Predicting the optimal conditions in microcrystal cellulose production from bagasse using the Response Surface Methodology (RSM) [Volume 13, Issue 2, 2022, Pages 225-238]
-
Deinking
The Effect of Different Concentrations of Cellulase Enzyme on
Optical and Physical Properties of ONP Deinked Pulp [Volume 2, Issue 1, 2011, Pages 1-15]
-
Delignification
Effect of alkaline pretreatment and surface impregnation on the set recovery of densified poplar wood [Volume 11, Issue 3, 2020, Pages 345-354]
-
Delignification and Degree of polymerization
Comparison of the effect of ozonation on the lignin removal of sugarcane bagasse and its unbleached paper pulp. [Volume 14, Issue 3, 2023, Pages 313-325]
-
Demand of Wood
The Effect of Targeted Subsidies on the Demand Patern of Wood and its Products in Khorramabad City [Volume 9, Issue 4, 2018, Pages 525-535]
-
Dendrochronology
Investigation of growth dynamics of Juniper Trees in two Protected and Grazing areas in Jeyshabad, Zanjan, Iran Using Dendrochronology Method [Volume 12, Issue 1, 2021, Pages 83-94]
-
Densification
The Effect of Chemical Modification with Phenol Formaldehyde and Compression on Mechanical Properties of Paulownia (P.fortunie) Wood [Volume 3, Issue 1, 2013, Pages 13-27]
-
Densification
Study on Leaching of Copper Nanoparticles in Combined Impregnation- Densification Treatments of wood after Accelerated Aging [Volume 6, Issue 1, 2015, Pages 159-165]
-
Densification
Effect of press closing speed on stress relaxation and set recovery of densified alder wood [Volume 10, Issue 4, 2019, Pages 469-477]
-
Densification
Effect of densification on the practical properties of chemical and thermal modified poplar wood [Volume 11, Issue 2, 2020, Pages 185-197]
-
Densification
Effect of poplar wood impregnation with epoxidized soybean oil on the set recovery [Volume 11, Issue 3, 2020, Pages 381-394]
-
Densification
Investigation of the effect of palm texture densification on surface properties and coating quality with water-based and solvent-based coatings for use in furniture [Volume 11, Issue 3, 2020, Pages 419-431]
-
Densification
Comparative investigation of the effect of pretreatment type and densification conditions on physical and mechanical properties of paulownia and poplar woods [Volume 12, Issue 4, 2021, Pages 521-536]
-
Density
Comparative Study of Heat Treated Beech Wood in Hot Water
and Steam Mediums [Volume 2, Issue 1, 2011, Pages 27-38]
-
Density
The Effects of Agroforestry Practices on Physical Propertiesin of Poplus Wood in Radial and Longitudinal Axes [Volume 2, Issue 2, 2011, Pages 53-64]
-
Depth of cut
Evaluation of wood machining parameters and surface quality in cutting process by water jet without abrasive material [Volume 12, Issue 3, 2021, Pages 429-440]
-
Design and construction
Design, Construction, and Performance Analysis of a Wood Thermal Conductivity Measurement Device using Flat Plate Heat Pipes [Volume 1, Issue 2, 2011, Pages 115-123]
-
Dewatering capability
The effect of enzymatic pre-treatment with amylase and refining on the physical and dewatering properties of OCC pulp [Volume 12, Issue 4, 2021, Pages 507-519]
-
Dialdehyde cellulose
Synthesis and characterization of aminated Lignin-based Hydrogel [Volume 12, Issue 4, 2021, Pages 551-560]
-
Diameter
Establishing mathematical model withdrawal resistance of wooden dowel in
plywood [Volume 4, Issue 1, 2013, Pages 37-47]
-
Diameter
Investigation the bending moment resistance of joints fabricated
with dowel in the case-type furniture [Volume 5, Issue 2, 2014, Pages 37-46]
-
Diameter dowel
Investigating the Stress Carrying Capacity of Corner Joints In The
Furniture Frame Fabricated With Dowel [Volume 5, Issue 1, 2014, Pages 21-32]
-
Differential scanning calorimetry (DSC)
Measurement of Fiber Saturation Point of Wood Using Differential Scanning Calorimetry: Measurement Fundamentals and Experimental Results [Volume 7, Issue 4, 2016, Pages 615-623]
-
Diffusion Coefficient
Tracking and Simulation of Dry Shell Formation in a Wood Drying Process by X-ray Spectroscopy [Volume 1, Issue 2, 2011, Pages 1-11]
-
Diffusion Coefficient
Biodegradation behaviors of cellulose nanocrystals -PVA nanocomposites [Volume 5, Issue 2, 2014, Pages 1-13]
-
Digester
Recycling of waste MDF via digester and production of nanocrystalline cellulose from recycled fibers [Volume 12, Issue 2, 2021, Pages 271-282]
-
Dilute acid
Effect of Hot water and dilute acid pretreatment on the chemical properties of liquorice root [Volume 7, Issue 1, 2016, Pages 129-140]
-
Dilute acid
The effect of bagasse pith xylose on yeast growth kinetic in bio-products manufacture [Volume 9, Issue 1, 2018, Pages 41-51]
-
Dimensional stability
Effect of heat-treatment with raw cotton seed oil on decay resistance and dimensional stability of Beech (Fagus orientalis) [Volume 6, Issue 1, 2015, Pages 119-131]
-
Dimensional stability
Investigation on the effect of mixed rapeseed stalk residues with wood particles, and mixing of melamine and urea formaldehyde resin on properties of manufactured particleboard [Volume 7, Issue 2, 2016, Pages 167-178]
-
Dimensional stability
Penetrability of nano-wollastonite into the poplar wood and its effect on wood durability and dimensional stability [Volume 8, Issue 2, 2017, Pages 267-282]
-
Dimensional stability
Effect of Mixing Zeolite Compounds in Manufacturing Process of Medium Density Fiberboard on Physical and Mechanical Properties [Volume 14, Issue 1, 2023, Pages 41-53]
-
Discoloration
Properties Evaluation of High Density Polyethylene Composite Filled with Bagasse after Accelerated Weathered [Volume 3, Issue 2, 2013, Pages 119-130]
-
Discoloration
Investigating the changes in the surface quality of common species in furniture industry using chemical vapors [Volume 10, Issue 1, 2019, Pages 63-75]
-
Disperger
Effect of Dispersion and Bleaching on the Mechanical and Optical Properties of Deinked Recycled Pulp [Volume 7, Issue 1, 2016, Pages 33-41]
-
Dispersed rosin
Effect of alum-dispersed rosin system on water absorption, strength and optical properties of papers made from recycled fibers [Volume 10, Issue 3, 2019, Pages 385-395]
-
Dispersion
Surface modification of cellulose nanocrystals using radio-frequency plasma [Volume 13, Issue 1, 2022, Pages 49-60]
-
Dissolving pulp
Production of dissolving pulp from populus deltoides wood utilizing alkaline pre-extraction followed by soda-AQ pulping process [Volume 9, Issue 2, 2018, Pages 289-298]
-
Dissolving pulp
Acidic prehydrolysis role in dissolving pulp production from OCC [Volume 9, Issue 3, 2018, Pages 441-457]
-
Dissolving pulp
Using of xylanase and cold caustic extraction to remove hemicellulose from bagasse bleached pulp for dissolving pulp production [Volume 10, Issue 1, 2019, Pages 1-9]
-
Domestic production
The future of wood products’ trade and industry in Iran [Volume 9, Issue 1, 2018, Pages 1-14]
-
Dorud
Preference of consumers in the selection of final woody products in different income quarters in households of Dorud City [Volume 9, Issue 2, 2018, Pages 175-185]
-
Double shear connections
Double Shear Steel-To- Timber Connections Design and Investigation of their Load Carrying Capacity According to EC5 [Volume 11, Issue 3, 2020, Pages 365-380]
-
Drainage
Cellulose nanofibers made from waste printing and writing papers and its effect on the properties of recycled paper [Volume 12, Issue 2, 2021, Pages 185-194]
-
Drop-Weight Impact Test
Investigation of the impact resistance of the plywood made with adhesive enhanced with Cellulose Nanofibers [Volume 9, Issue 2, 2018, Pages 263-275]
-
Drying
Effect of Drying Method on the Permeability Coefficient of
Oak Wood (Quercus infactoria) [Volume 5, Issue 1, 2014, Pages 1-9]
-
Drying
Preparation of a Kiln Drying Schedule for Poplar (Populus nigra)
Lumber of 5 cm Thickness [Volume 1, Issue 2, 2011, Pages 13-25]
-
Drying defects
Preparation of a Kiln Drying Schedule for Poplar (Populus nigra)
Lumber of 5 cm Thickness [Volume 1, Issue 2, 2011, Pages 13-25]
-
Drying kinetics
Measuring the Drying Kinetics and Mass Transfer Coefficients of Hornbeam Wood (Carpinus betulus) from Nooshahar Region [Volume 2, Issue 1, 2011, Pages 39-51]
-
Dry shell
Tracking and Simulation of Dry Shell Formation in a Wood Drying Process by X-ray Spectroscopy [Volume 1, Issue 2, 2011, Pages 1-11]
-
Drywall screw
The predicting ultimate of joint withdrawal resistance constructed of plywood with regression models application according to diameter and penetrating depth [Volume 4, Issue 2, 2013, Pages 11-22]
-
DSC Test
Effect of poly lactic acid on physical and mechanical properties of wood plastic composite [Volume 10, Issue 2, 2019, Pages 261-272]
-
Dyes
The use of lignocellulosic waste of rice straw for AO7 and RBB dyes adsorption from water [Volume 9, Issue 3, 2018, Pages 397-409]
-
Dynamical behavior
Study of Behavior and Measurement of Seismic Resistant Connections in Light Structural Frame Out of Aspen [Volume 3, Issue 1, 2013, Pages 81-97]
-
Dynamic light scattering
The effect of different drying methods on cellulosic nanofibers and resulting composites [Volume 6, Issue 2, 2015, Pages 285-298]
-
Dynamic mechanical analysis
Effects of Modified Iron Oxide Nanoparticles on the Thermal and Dynamic Mechanical Properties of Cellulose Poly(vinyl alcohol) Blend Films [Volume 6, Issue 2, 2015, Pages 251-263]
-
Dynamic mechanical analysis
Dynamic Mechanical and Thermal Properties of Bagasse/Glass Fiber/Polypropylene Hybrid Composites [Volume 7, Issue 1, 2016, Pages 103-114]
-
Dynamic modulus of elasticity
Evaluation of Modulus of Elasticity in Standing Trees and Sawn Wood in Populous deltoids using Nondestructive Stress Wave Testing [Volume 5, Issue 1, 2014, Pages 11-20]
E
-
EC5
Investigation of Embedment Strength of Metal Fasteners In Wood Engineered Product And Comparison With EC 5 Predicted Values [Volume 9, Issue 1, 2018, Pages 87-101]
-
EC5
Double Shear Steel-To- Timber Connections Design and Investigation of their Load Carrying Capacity According to EC5 [Volume 11, Issue 3, 2020, Pages 365-380]
-
ECF bleaching
Production of nanocrystals and nanofibrils from unbleached and bleached soda pulp with ECFlight bleaching sequence and comparison of their morphological and thermal properties [Volume 13, Issue 4, 2022, Pages 457-471]
-
Economic Development
Investigating the effectiveness and impact of factors affecting the growth and economic development of the classical furniture industry (Case study: Tehran province) [Volume 11, Issue 2, 2020, Pages 281-292]
-
Effective Criteria
Determination of Effective Criteria for Location Selection of Kiln Wood Drying Plants by AHP Technique [Volume 1, Issue 2, 2011, Pages 55-67]
-
Effective Criteria
Studying and Assessment of the Effective Criteria on Opportunities Attainment from Offshore Outsourcing in Iran Wood Furniture Industry [Volume 6, Issue 2, 2015, Pages 203-216]
-
Effective Criterion
Location Selection for Hardboard Industry in Mazandaran Province [Volume 2, Issue 2, 2011, Pages 65-81]
-
Effectiveness coefficient
Dynamic Mechanical and Thermal Properties of Bagasse/Glass Fiber/Polypropylene Hybrid Composites [Volume 7, Issue 1, 2016, Pages 103-114]
-
Effluent
Investigation of Electro coagulation Process on TSS and COD Removal from Effluent of the Paper Recycling Mill Using Al Electrodes [Volume 3, Issue 2, 2013, Pages 53-64]
-
Effluent pollution load
A Comparison Between Alkali Peroxide and Activated Peroxide Processes in Bleaching Hardwoods Chemi-mechanical Pulp [Volume 3, Issue 2, 2013, Pages 91-103]
-
EGARCH
The Asymmetric Impacts of Currency Shocks on Wood Imports and Wood Products in Iran with Emphasis on the Environment of Shock Formation [Volume 11, Issue 4, 2020, Pages 585-598]
-
Electrical impedance tomography
Determination of sapwood area in Pinus nigra by electrical impedance tomography [Volume 12, Issue 1, 2021, Pages 73-82]
-
Electric current
Modification of The Beech (Fagus orientalis) Wood Properties via Electricity [Volume 13, Issue 1, 2022, Pages 27-35]
-
Electrospinning
The effect of residual xylan on cellulose nanofiber production through electrospinning of wheat straw [Volume 10, Issue 4, 2019, Pages 543-558]
-
Electrostatic Charge
Effect of Chitosan Electrostatic Charge on the Performance of Chitosan-Nanosilica in Recycled Old Corrugated Container Pulp [Volume 9, Issue 3, 2018, Pages 459-469]
-
ELM
The effect of dimensional changes of flange and web in I-joist on its bending strength [Volume 10, Issue 4, 2019, Pages 507-520]
-
Embedment strength
Investigation of Embedment Strength of Metal Fasteners In Wood Engineered Product And Comparison With EC 5 Predicted Values [Volume 9, Issue 1, 2018, Pages 87-101]
-
Energetic Polymer
Synthesizing and Producing of Low Sensitive Nitrocellulose with Acetylation Method [Volume 10, Issue 2, 2019, Pages 175-187]
-
Energy function
A New Method for Defect Detection on Images Captured from Wood Veneer: Optimization of Energy Function on Natural Texture Eliminated Image [Volume 6, Issue 2, 2015, Pages 299-309]
-
Engineered wood product
Investigation of Embedment Strength of Metal Fasteners In Wood Engineered Product And Comparison With EC 5 Predicted Values [Volume 9, Issue 1, 2018, Pages 87-101]
-
EN Standard
The effect of using waste newspaper in surface layers on physical and mechanical properties of three-layer particleboard [Volume 7, Issue 4, 2016, Pages 537-547]
-
Environmental pollution
Study on the ability of lignocellulosic materials to absorb crude oil from aqueous media [Volume 11, Issue 2, 2020, Pages 255-267]
-
Enzymatic pretreatment
Use of viscozyme enzyme as an alternative technology for pulp refining and improvement bagasse soda pulp properties [Volume 6, Issue 1, 2015, Pages 95-108]
-
Epoxy resin
The Effect of Face and Adhesive Types on Mechanical Properties of
Sandwich Panels Made from Honeycomb Paper [Volume 4, Issue 2, 2013, Pages 141-152]
-
Epoxy resin
A Study on Tensile Behavior and Water Uptake of Wood Powder-Composites Based on Epoxy and Unsaturated Polyester Resins [Volume 3, Issue 2, 2013, Pages 141-156]
-
Epoxy resin
Comparative study on natural cellulosic and synthesized aramid fibers on mechanical properties of epoxy composite [Volume 10, Issue 3, 2019, Pages 417-427]
-
Epoxy tannin resin
Study of physical and mechanical properties of produced strawboard using bio epoxy tannins resin [Volume 7, Issue 2, 2016, Pages 271-282]
-
EPTMAC
Effect of Cationised Long Fibers as Additive On Mechanical Properties of CMP [Volume 4, Issue 1, 2013, Pages 161-170]
-
Equisetum telmateia
Investigation on Effect of Additives on Thermal Conductivity of Herbaceous Fiber Reinforced Cement Composite [Volume 3, Issue 2, 2013, Pages 39-52]
-
Ergonomics
Sliding table panel saw, Machining parameters, Sound level meter, Ergonomics, Sound emission [Volume 12, Issue 4, 2021, Pages 465-479]
-
Ethylene vinyl acetate
Production and evaluation of lightweight fiberboard using ethylene vinyl acetate foam [Volume 12, Issue 3, 2021, Pages 405-417]
-
EVA
Investigation on the Effect of Chemical Foaming agent and Wood Flour content on Mechanical Properties, Density and Cell morphology of HDPE/EVA/ Wood Flour Hybrid Foamed Composites [Volume 2, Issue 1, 2011, Pages 63-80]
-
Evonymus latifolia
Physical and biometry properties of Evonymus latifolia wood
(Case study in Chamestan-Nour) [Volume 6, Issue 2, 2015, Pages 239-249]
-
Extracted materials
A Study on Tensile Behavior and Water Uptake of Wood Powder-Composites Based on Epoxy and Unsaturated Polyester Resins [Volume 3, Issue 2, 2013, Pages 141-156]
-
Extruder
Investigating on Effect of Particle Form and Mixing Method on
applied Properties Green Composite [Volume 5, Issue 1, 2014, Pages 63-74]
F
-
Fagus orientalis
Investigation of the Natural Durability of Beech Wood by Meyer-Veltrup Model [Volume 14, Issue 4, 2023, Pages 377-387]
-
Failure
Investigation of Embedment Strength of Metal Fasteners In Wood Engineered Product And Comparison With EC 5 Predicted Values [Volume 9, Issue 1, 2018, Pages 87-101]
-
Failure
Double Shear Steel-To- Timber Connections Design and Investigation of their Load Carrying Capacity According to EC5 [Volume 11, Issue 3, 2020, Pages 365-380]
-
Fast-growing
Improving the mechanical and physical properties of particleboard produced from bamboo- industrial wood using polypropylene powder [Volume 9, Issue 2, 2018, Pages 199-208]
-
Fast-growing species
Comparative investigation of the effect of pretreatment type and densification conditions on physical and mechanical properties of paulownia and poplar woods [Volume 12, Issue 4, 2021, Pages 521-536]
-
FDAHP
Evaluation of challenges of wood imports to Iran using Fuzzy Delphi Analytical Hierarchy Process [Volume 8, Issue 2, 2017, Pages 159-169]
-
Feeding rate
Investigation and Evaluation on Influence of Machining (CNC) Conditions on Surface Quality of Paulownia Wood [Volume 2, Issue 2, 2011, Pages 1-13]
-
Feed speed
Study on Influensive Factors on Surface Quality and Edges of Through- Holes Bored in Particleboard and MDF [Volume 3, Issue 1, 2013, Pages 67-79]
-
Fiber
Investigating on Effect of Particle Form and Mixing Method on
applied Properties Green Composite [Volume 5, Issue 1, 2014, Pages 63-74]
-
Fiber
Investigation on the Effect of Kenaf Core and Stalk Fiber on the Medium Density Fiber Board Properties Made of Poplar Fibers [Volume 2, Issue 2, 2011, Pages 99-110]
-
Fiber biometry
Anatomical, Biometrical, Physical and Chemical properties of wild service tree (Sorbus torminalis L.) (Case study: Sangdeh forests of Mazandaran) [Volume 9, Issue 4, 2018, Pages 597-608]
-
Fiber fibrillation
Use of viscozyme enzyme as an alternative technology for pulp refining and improvement bagasse soda pulp properties [Volume 6, Issue 1, 2015, Pages 95-108]
-
Fiber modification
Modification of NSSC pulp broke fibers using layering method and investigating its effect on paper properties [Volume 7, Issue 3, 2016, Pages 413-423]
-
Fiber Morphological
Investigate of Biometric andChemical Properties of Ammodendron persicum Fibers (Case Study; Zirkouh area - Qaenat City, South Khorasan, Iran) [Volume 10, Issue 1, 2019, Pages 49-62]
-
Fiber saturation point (FSP)
Measurement of Fiber Saturation Point of Wood Using Differential Scanning Calorimetry: Measurement Fundamentals and Experimental Results [Volume 7, Issue 4, 2016, Pages 615-623]
-
Fibrillation
The effect of alkali treatment of bamboo on the physical and mechanical properties of particleboard made from bamboo - industrial wood particles [Volume 8, Issue 4, 2017, Pages 605-615]
-
Field survey
Quantitative analysis of poplar plantations in four Iranian
Provinces (Case of the study: East Azerbaijan, Zanjan, Ardabil and Kermanshah) [Volume 12, Issue 3, 2021, Pages 375-389]
-
Filler
Using cellulose nanofiber as filler of urea formaldehyde resin in plywood manufacture [Volume 6, Issue 2, 2015, Pages 227-237]
-
Filler
The effect of using Alkali sulfit-Anthraquinone (AS-AQ) liquor powder as filler of urea formaldehyde resin on functional properties of plywood [Volume 9, Issue 3, 2018, Pages 337-347]
-
Filler
Using Zeolite as a Filler with Chitosan Biopolymer in Papermaking [Volume 11, Issue 3, 2020, Pages 407-417]
-
Filler
Effect of Mixing Zeolite Compounds in Manufacturing Process of Medium Density Fiberboard on Physical and Mechanical Properties [Volume 14, Issue 1, 2023, Pages 41-53]
-
Filler-Extender
Comparing lignin derived from black liquors of alkaline sulfite-AQ, soda-AQ and kraft processes as a filler-extender in the poplar plywood [Volume 9, Issue 3, 2018, Pages 349-358]
-
Film
Evaluation of the starch films containing cellulose and lignocellulose for food packaging [Volume 10, Issue 1, 2019, Pages 35-47]
-
Film thickness
The effect of nano-SiO2 particles and film thickness on physical properties of transparent wood coatings [Volume 12, Issue 1, 2021, Pages 1-15]
-
Finger joint
Performance improvement of PVAc glue in wood finger joints by using Isocyanate as a hardener [Volume 9, Issue 4, 2018, Pages 585-596]
-
Finish Color Spectrum
The study of Effective Factors On Selecting Finish Type and Color Spectrum and Finishing Method In The Industry Of Home Furniture (Case Study: Tehran Province) [Volume 13, Issue 2, 2022, Pages 147-160]
-
Fire retardancy
The possibility of using zeolite as a retarder of particleboard obtained from sugarcane pulp [Volume 12, Issue 3, 2021, Pages 309-321]
-
Fire-Retarding Properties
Study on the potential use of nano-wollastonite to improve the fire resistance and dimensional stability of poplar wood (Populus nigra) [Volume 4, Issue 2, 2013, Pages 1-10]
-
Fire-Retarding Properties
Effect of Nano bentonite on Fire Retardant Properties of
Medium density fiberboard (MDF) [Volume 5, Issue 1, 2014, Pages 55-62]
-
Flammability
Fire performance, mechanical strength and dimensional stability of wood flour–polyethylene composites under the influence of different fire retardants [Volume 8, Issue 1, 2017, Pages 145-158]
-
Flat Plate Heat Pipe
Design, Construction, and Performance Analysis of a Wood Thermal Conductivity Measurement Device using Flat Plate Heat Pipes [Volume 1, Issue 2, 2011, Pages 115-123]
-
Flexural creep
Study on Flexural Creep Parameters of Overlayed Particleboard by Natural and Melaminated Veneers [Volume 3, Issue 1, 2013, Pages 119-128]
-
Flexural performance
Experimental study on flexural performance of poplar glued-laminated timber constructed by mechanical fastener and comparing them with those made with cold press [Volume 10, Issue 3, 2019, Pages 347-360]
-
Flexural performance
Flexural performance of cross-laminated timber made out of poplar reinforced with nail and screw [Volume 11, Issue 1, 2020, Pages 1-18]
-
Flexural Strength
Investigating the characteristics of wood-plastic composites made from bagasse [Volume 14, Issue 3, 2023, Pages 271-283]
-
Flour
Investigating on Effect of Particle Form and Mixing Method on
applied Properties Green Composite [Volume 5, Issue 1, 2014, Pages 63-74]
-
Fluorescent staining
Fluorescent labling methods by rhodamine B isothiocyanate in cellulose Materials [Volume 13, Issue 4, 2022, Pages 405-417]
-
Fluting Paper
Determination and evaluation of effective criteria to
location selection the optimal for establishing fluting paper mills from
agricultural residues of Mazandaran province [Volume 4, Issue 2, 2013, Pages 45-64]
-
Fluting Paper
Evaluation of OCC Recycled Pulps Admixture with Local Hardwood NSSCPulp at Mazandaran Wood and Paper Industries [Volume 2, Issue 2, 2011, Pages 147-160]
-
Fluting Paper
The effect of cationic starch on the mechanical properties of paper Fluting mixing soda bagasse pulp and OCC [Volume 12, Issue 1, 2021, Pages 121-130]
-
Fluting Paper
Life cycle assessment of SMF and GMF Fluting paper production process [Volume 13, Issue 3, 2022, Pages 249-259]
-
Fly ash
Investigation on Effect of Additives on Thermal Conductivity of Herbaceous Fiber Reinforced Cement Composite [Volume 3, Issue 2, 2013, Pages 39-52]
-
Food industry
Identifying the wood type and investigating the quality of imported wooden ice cream sticks [Volume 12, Issue 4, 2021, Pages 495-506]
-
Food Packaging
Evaluation of the starch films containing cellulose and lignocellulose for food packaging [Volume 10, Issue 1, 2019, Pages 35-47]
-
Food Packaging
A novel paper packaging coated with polyethylene wax based dispersion barrier coating for food packaging applications [Volume 11, Issue 1, 2020, Pages 85-95]
-
Forecasting
The future of wood products’ trade and industry in Iran [Volume 9, Issue 1, 2018, Pages 1-14]
-
Forests’ Breathing Plan
The future of wood products’ trade and industry in Iran [Volume 9, Issue 1, 2018, Pages 1-14]
-
Formacell lignin
The potential of replacing the starch with soda and formacell lignins in surface sizing and evaluation of physical and mechanical properties of produced liner papers [Volume 12, Issue 4, 2021, Pages 453-464]
-
Formaldehyde
The Survey of Chemical Paper Pulp Properties Produced from Rice Straw Based on Formaldehyde Sulfide Method. [Volume 3, Issue 2, 2013, Pages 13-23]
-
Formaldehyde-based resins
Study on physical properties and weathering resistance of wood modified by formaldehyde-based resins containing nano zinc oxide [Volume 11, Issue 4, 2020, Pages 599-610]
-
Forming
Effect of Applying Cellulose Nanofibers on the Properties of Multiply Paper Made from Recycled Fibers [Volume 9, Issue 3, 2018, Pages 359-369]
-
Fourier's Law
Design, Construction, and Performance Analysis of a Wood Thermal Conductivity Measurement Device using Flat Plate Heat Pipes [Volume 1, Issue 2, 2011, Pages 115-123]
-
Fourier transform infrared spectra
Effect of the addition of citric acid on particleboard properties [Volume 10, Issue 1, 2019, Pages 89-99]
-
Fourier transform infrared spectroscopy (FTIR)
The effect of different modification conditions on the efficiency of poplar wood epoxidation and the physical properties of the product [Volume 11, Issue 4, 2020, Pages 645-656]
-
Fourier transform infrared spectroscopy (FTIR)
Determination the optimal condition for surface modification of spruce wood with Rosin Maleic [Volume 11, Issue 4, 2020, Pages 657-668]
-
Fractionation
Identification and Evaluation of characteristics of Fractions of Industrial Softwood Kraft Lignin Separated by Single Step Fractionation [Volume 10, Issue 2, 2019, Pages 297-309]
-
Fractionation
Investigation on the Potential of Using the Residual Fibers from Fractionation of Canola Stalk with Glycerol in Pulp Production [Volume 14, Issue 2, 2023, Pages 139-153]
-
Fracture toughness
Investigation on fracture toughness and internal bonding of oriented strand board (OSB) made from Poplar [Volume 9, Issue 4, 2018, Pages 549-559]
-
Freeze drying
The effect of different drying methods on cellulosic nanofibers and resulting composites [Volume 6, Issue 2, 2015, Pages 285-298]
-
Freeze drying
Study of Biodegradability and Mechanical Properties of Polyvinyl Alcohol (PVA) Reinforced Celloluse Nanofiber (CNF) [Volume 8, Issue 4, 2017, Pages 497-508]
-
Freeze drying
The Effect of Concentration of Modified Cellulose NanoFibers by phthalimide on the Adsorption Rate of Carbon Dioxide (CO2) [Volume 10, Issue 3, 2019, Pages 397-406]
-
Freeze-drying
Fabrication of Bilayer Nanocellulosic Aerogel Scaffold and Evaluation of Its Properties for Skin Tissue engineering [Volume 10, Issue 2, 2019, Pages 287-296]
-
Friction materials
Investigation of using rice hask and paper waste to make free copper brake lining [Volume 11, Issue 4, 2020, Pages 571-583]
-
Friedman analyses
Investigating the Effective Index on Customers Choice in Buying Furniture [Volume 5, Issue 1, 2014, Pages 153-164]
-
Friedmans analyses
Investigating the effective factors in making Kitchen cabinets made of wooden panel products [Volume 14, Issue 2, 2023, Pages 183-197]
-
FT-IR
Vanillin Production from kraft Liquor of Pinus eldarica [Volume 4, Issue 1, 2013, Pages 143-150]
-
FTIR
The effect of combined colloidal nano silver-hydrothermal treatment on weight changes and chemical structure of beech wood (Fagus orientalis) [Volume 6, Issue 1, 2015, Pages 109-118]
-
FTIR
Investigation on the physical properties of poplar wood (Populus deltoids) modified with glutaraldehyde/paraffin [Volume 8, Issue 4, 2017, Pages 617-630]
-
FTIR spectroscopy
Properties Evaluation of High Density Polyethylene Composite Filled with Bagasse after Accelerated Weathered [Volume 3, Issue 2, 2013, Pages 119-130]
-
Fuming
Investigating the changes in the surface quality of common species in furniture industry using chemical vapors [Volume 10, Issue 1, 2019, Pages 63-75]
-
Fungal test
Investigation of ِDecay Resistance of Poplar Plywood with Encapsulated Pesticides [Volume 13, Issue 2, 2022, Pages 201-212]
-
Fungicide
Investigation the effect of Thiophanate-methyl on the ageing of Gall ink of the historical papers
[Volume 12, Issue 2, 2021, Pages 195-205]
-
Furfural
Investigating the thermal properties of bio -adhesive tanic acid and gallic acid with furfural [Volume 14, Issue 1, 2023, Pages 55-63]
-
Furniture Finishing
The study of Effective Factors On Selecting Finish Type and Color Spectrum and Finishing Method In The Industry Of Home Furniture (Case Study: Tehran Province) [Volume 13, Issue 2, 2022, Pages 147-160]
-
Furniture industry
Evaluation of the geographical concentration of furniture industry in Iran with the aim of furniture cluster development [Volume 4, Issue 2, 2013, Pages 33-44]
-
Furniture industry
Investigating the effectiveness and impact of factors affecting the growth and economic development of the classical furniture industry (Case study: Tehran province) [Volume 11, Issue 2, 2020, Pages 281-292]
-
Furniture industry
Provide a strategic marketing model in the furniture industry based on exploratory mixed research plan [Volume 13, Issue 2, 2022, Pages 171-186]
-
Fuzzy Delphi
Choosing a technology acquisition method in the paper industry with a fuzzy decision-making approach [Volume 14, Issue 2, 2023, Pages 199-214]
-
Fuzzy systems
Comparison of predicted thickness swelling of particleboard with fuzzy systems and artificial neural networks [Volume 6, Issue 1, 2015, Pages 53-66]
G
-
Galic Acid
Investigating the thermal properties of bio -adhesive tanic acid and gallic acid with furfural [Volume 14, Issue 1, 2023, Pages 55-63]
-
Gamma test
Identification and determination of the effect of factory control variables on the physical and mechanical properties of medium density fiberboard with artificial neural network system [Volume 13, Issue 3, 2022, Pages 275-287]
-
Gas Adjustment
Comparing the economic value of market function and unmarket function of some populus species [Volume 10, Issue 2, 2019, Pages 217-222]
-
Gas Chromatography–Mass Spectrometry (GC-MS)
Investigate of Biometric andChemical Properties of Ammodendron persicum Fibers (Case Study; Zirkouh area - Qaenat City, South Khorasan, Iran) [Volume 10, Issue 1, 2019, Pages 49-62]
-
Gas chromatography/Mass spectroscopy
Chemical Characterization of Ziziphus spina-chrisiti Wood Extractives using Gas Chromatography/Mass Spectroscopy Technique [Volume 4, Issue 2, 2013, Pages 69-78]
-
Gas permeability
Thermal treatment and its effect on the gas permeability of Populus nigra [Volume 4, Issue 1, 2013, Pages 151-159]
-
Gelatinous Layer
Anatomical Variations in Tension Wood of Populus alba under alternate bending, nitrogen fertilization and gibberellin treatments [Volume 11, Issue 1, 2020, Pages 147-160]
-
Gibberellin
Anatomical Variations in Tension Wood of Populus alba under alternate bending, nitrogen fertilization and gibberellin treatments [Volume 11, Issue 1, 2020, Pages 147-160]
-
Glass fiber
Dynamic Mechanical and Thermal Properties of Bagasse/Glass Fiber/Polypropylene Hybrid Composites [Volume 7, Issue 1, 2016, Pages 103-114]
-
Glass fiber
A Survey on biodegradation, hardness and dimensional stability of a hybrid composite of wood flour / polypropylene / glass fiber in different circumstances [Volume 8, Issue 2, 2017, Pages 211-223]
-
Glass Fiber Reinforced Polymer
Strengthening of the cross-laminated timber using glass fiber-reinforced polymer on the lateral performance of the single shear lap joints [Volume 13, Issue 1, 2022, Pages 1-14]
-
Glass fibers
Investigation on the Physical and Mechanical Properties of Composites from Combined Recycled ONP-Glass Fibers with Polypropylene [Volume 3, Issue 1, 2013, Pages 29-42]
-
Glass fibers
Reinforcement of I-Shaped Beams Constructed with Parallel Strand Lumber and Laminated Veneer Lumber Utilizing Glass Fiber Polymer [Volume 14, Issue 4, 2023, Pages 389-402]
-
Glass transition temperature
Identification and Evaluation of characteristics of Fractions of Industrial Softwood Kraft Lignin Separated by Single Step Fractionation [Volume 10, Issue 2, 2019, Pages 297-309]
-
Glass transition temperature
Investigation of the mechanical-dynamic and thermal properties of nanocomposites manufactured from rapeseed stalk flour/ nanographene and high-density polyethylene [Volume 13, Issue 4, 2022, Pages 445-456]
-
Gloss paper
Evaluation and comparision of mechanical and barrier properties of stone paper and gloss paper [Volume 10, Issue 3, 2019, Pages 373-384]
-
Glulam
The effect of hygro-thermo-mechanical modification on the applied properties of glulam made from poplar [Volume 11, Issue 2, 2020, Pages 241-253]
-
Glulam
Investigation of mechanical properties of glulam beams made with screws or glue and reinforced with steel plates [Volume 14, Issue 1, 2023, Pages 79-96]
-
Glutaraldehyde
Comparison the performance of different catalysts in chemical modification of Poplar wood with Glutaraldehyde [Volume 7, Issue 3, 2016, Pages 363-375]
-
Glutaraldehyde
Investigation on the physical properties of poplar wood (Populus deltoids) modified with glutaraldehyde/paraffin [Volume 8, Issue 4, 2017, Pages 617-630]
-
Glutaraldehyde
Effect of densification on the practical properties of chemical and thermal modified poplar wood [Volume 11, Issue 2, 2020, Pages 185-197]
-
Glycerol
Investigation on the Potential of Using the Residual Fibers from Fractionation of Canola Stalk with Glycerol in Pulp Production [Volume 14, Issue 2, 2023, Pages 139-153]
-
Graff ″C″
Identification of Quantitative and Qualitative Papermaking Parameters of OCC Pulp Fibers [Volume 6, Issue 2, 2015, Pages 265-274]
-
Grafting
Effect of Cationised Long Fibers as Additive On Mechanical Properties of CMP [Volume 4, Issue 1, 2013, Pages 161-170]
-
Grapevine pruning
Particles from grapevine pruning residue as a bio-based substitute for wood in hybrid particleboard production [Volume 13, Issue 4, 2022, Pages 509-518]
-
Graphite
Minimizing hot-press time in the manufacturing process
of wood plastic composites [Volume 4, Issue 2, 2013, Pages 79-90]
-
Graphite powder
Effect of Graphite powder on thermal conductivity, physical and mechanical properties of 3-layer particleboard [Volume 4, Issue 2, 2013, Pages 123-130]
-
Green composite
Effects of cellulose nano crystal addition on the properties of polyhydroxybutyrate-co-valerate (PHBV) films [Volume 10, Issue 1, 2019, Pages 153-164]
-
Greenhouse gas emissions
Energy Consumption Analysis in Production of bagasse and greenhouse gas emission (GHG) assessment from this product and Medium Density Fiberboard based on it [Volume 11, Issue 3, 2020, Pages 471-483]
-
Ground penetrating radar
Application of GPR technique in evaluation of internal defects in hardwood species [Volume 8, Issue 2, 2017, Pages 225-240]
-
Growth pattern
Investigation of growth dynamics of Juniper Trees in two Protected and Grazing areas in Jeyshabad, Zanjan, Iran Using Dendrochronology Method [Volume 12, Issue 1, 2021, Pages 83-94]
-
Gypsum content
Investigation of the type and content of gypsum on the dimensional stability and mechanical properties of gypsum particleboard [Volume 5, Issue 1, 2014, Pages 45-54]
-
Gypsum particleboard
Investigation of the type and content of gypsum on the dimensional stability and mechanical properties of gypsum particleboard [Volume 5, Issue 1, 2014, Pages 45-54]
H
-
Hall Tideman
Determination of Concentration Level and Market Analysis of Iran Particle Board Imports [Volume 11, Issue 4, 2020, Pages 611-626]
-
Haloxylon Wood
Investigation adding of Nano clay particles and compatibilizer on the properties of composite made of polypropylene- Haloxylon wood flour [Volume 7, Issue 3, 2016, Pages 335-348]
-
Hand - arm vibration
Evaluation of the effect of chainsaw vibration on user's hand and arm during log bucking operations [Volume 9, Issue 4, 2018, Pages 471-483]
-
Hardboard Industry
Location Selection for Hardboard Industry in Mazandaran Province [Volume 2, Issue 2, 2011, Pages 65-81]
-
Hard fiberboard
The Effect of Face and Adhesive Types on Mechanical Properties of
Sandwich Panels Made from Honeycomb Paper [Volume 4, Issue 2, 2013, Pages 141-152]
-
Hardness
A Survey on biodegradation, hardness and dimensional stability of a hybrid composite of wood flour / polypropylene / glass fiber in different circumstances [Volume 8, Issue 2, 2017, Pages 211-223]
-
Hardness
The effect of Cerium Dioxide Nanoparticles on the Physical Properties of Polyurethane Clear Coating [Volume 8, Issue 4, 2017, Pages 645-656]
-
Hardness
Investigation the physical and mechanical properties of treated poplar wood (Populus deltoides) by wild pistachio tree resin [Volume 11, Issue 1, 2020, Pages 161-172]
-
Hardwood black liquor
Recovery of lignin from Kraft black liquor in the methods oxygen and carbon dioxide pretreatment from hardwood Kraft black liquor [Volume 12, Issue 2, 2021, Pages 235-246]
-
Hardwood species
Determination of Screw and Nail Withdrawal Strengths in Parallel and Perpendicular to Grain of some Hardwoods of Iran [Volume 3, Issue 2, 2013, Pages 171-180]
-
HDPE
Comparative investigation of treated bagasse and rice straw on physical and mechanical properties of natural fiber reinforced composites (NFRC) [Volume 8, Issue 3, 2017, Pages 453-469]
-
Heartwood
Effect of Drying Method on the Permeability Coefficient of
Oak Wood (Quercus infactoria) [Volume 5, Issue 1, 2014, Pages 1-9]
-
Heat treatment
Study on the Effect of Heat Treatment on Physical Properties of Poplar and Beech Woods Impregnated with Nano-Copper and Nano-Silver [Volume 3, Issue 1, 2013, Pages 109-117]
-
Heat treatment
Effect of tin oxide nano particles and heat treatment on decay resistance and physical properties of beech wood (Fagus orientalis) [Volume 5, Issue 2, 2014, Pages 71-80]
-
Heat treatment
Effect of poplar wood impregnation with epoxidized soybean oil on the set recovery [Volume 11, Issue 3, 2020, Pages 381-394]
-
Hemicellulase enzyme
Investigation on the bleachability of hemicellulase-deinked pulp versus chemical deinking process [Volume 13, Issue 3, 2022, Pages 289-300]
-
Hemicelluloses
Effect of Diluted Acid Pre-Extraction on Soda Pulping of Bagasse [Volume 5, Issue 1, 2014, Pages 119-128]
-
Herfindahl-Hirschman
Determination of Concentration Level and Market Analysis of Iran Particle Board Imports [Volume 11, Issue 4, 2020, Pages 611-626]
-
Hexamethyl disiloxane
Surface modification of cellulose nanocrystals using radio-frequency plasma [Volume 13, Issue 1, 2022, Pages 49-60]
-
High Performance Liquid Choromatography
Investigation of the Amount of Tannic Acid in Bark Oak (Quercus castanifolia) [Volume 1, Issue 1, 2011, Pages 27-35]
-
Historical Paper Documents
Influence of the Alkalified Tragacanth Gum on optical and Mechanical Strenght of the Historical Paper Documents [Volume 9, Issue 2, 2018, Pages 209-222]
-
Home Furniture Industry
The study of Effective Factors On Selecting Finish Type and Color Spectrum and Finishing Method In The Industry Of Home Furniture (Case Study: Tehran Province) [Volume 13, Issue 2, 2022, Pages 147-160]
-
Home Furniture Industry
Identifying and analyzing the factors affecting the loyalty of customers in the home furniture industry (case study: Rasht city) [Volume 14, Issue 1, 2023, Pages 17-30]
-
Homogeneous board
Study on the possibility of using bagasse in manufacture of sound-proof particleboard [Volume 3, Issue 1, 2013, Pages 43-52]
-
Horizontal Industry Trade
Investigating the status of wood and its products Intra-industry trade in Iran [Volume 10, Issue 1, 2019, Pages 125-141]
-
Hornbeam wood
Measuring the Drying Kinetics and Mass Transfer Coefficients of Hornbeam Wood (Carpinus betulus) from Nooshahar Region [Volume 2, Issue 1, 2011, Pages 39-51]
-
Hornbeam wood
The Effect of Storage Time of Hornbeam Billet Wood on its Physical and Mechanical Properties in the Forest (Case Study of Gorgan Shastkalateh Forest) [Volume 9, Issue 4, 2018, Pages 511-524]
-
Hornification
Influence of Recycling on Chemical Properties and Hornification of CMP and [Volume 3, Issue 1, 2013, Pages 99-108]
-
HPLC
Vanillin Production from kraft Liquor of Pinus eldarica [Volume 4, Issue 1, 2013, Pages 143-150]
-
Humidity coefficient diffusion
Long-term water absorption and thickness swelling and determine their characteristics in wood flour/polypropylene/Nano SiO2 nanocomposite [Volume 7, Issue 2, 2016, Pages 241-254]
-
Hybrid composite
Dynamic Mechanical and Thermal Properties of Bagasse/Glass Fiber/Polypropylene Hybrid Composites [Volume 7, Issue 1, 2016, Pages 103-114]
-
Hybrid composites؛ MAPP؛ Glass fiber؛ Wood flour؛ Water absorption
Influence of Concentration of Compatibilizer on
Long- term Water Absorption and Thickness Swelling Behavior of Polypropylene, Wood Flour/Glass Fiber Hybrid Composites [Volume 1, Issue 1, 2011, Pages 67-78]
-
Hybrid Foamed Composites
Investigation on the Effect of Chemical Foaming agent and Wood Flour content on Mechanical Properties, Density and Cell morphology of HDPE/EVA/ Wood Flour Hybrid Foamed Composites [Volume 2, Issue 1, 2011, Pages 63-80]
-
Hybrid Glulam
Technical evaluation of pure and combined glulam beams based on LSL made from date palm rachies [Volume 14, Issue 3, 2023, Pages 253-269]
-
Hybrid panel
Effect of the Expanded Polystyrene Granules on the Physical and Mechanical Properties of Hybrid Lightweight Panels [Volume 9, Issue 3, 2018, Pages 383-396]
-
Hydrated starch
Dimensional Stability of Poplar Wood by Paraffin Emulsion, Quaternary Ammonium and Hydrated Starch using Full-cell Treatment [Volume 1, Issue 1, 2011, Pages 79-88]
-
Hydrogel
Investigation of releasing mechanism of silver nitrate in the nanocellulose based hydrogel pad for burn healing [Volume 11, Issue 2, 2020, Pages 333-344]
-
Hydrogel
Synthesis and characterization of aminated Lignin-based Hydrogel [Volume 12, Issue 4, 2021, Pages 551-560]
-
Hydrogen peroxide bleaching
Environmental and strength properties evaluation of bleached recycled pulp with calcium hydroxide [Volume 13, Issue 1, 2022, Pages 71-81]
-
Hydrolyzable Tannins
Investigation of the Amount of Tannic Acid in Bark Oak (Quercus castanifolia) [Volume 1, Issue 1, 2011, Pages 27-35]
-
Hydrophobicity
Collapsibility and Wettability of Hydrothermally Treated Wood [Volume 3, Issue 1, 2013, Pages 1-11]
-
Hydrothermal
Comparative Study of Heat Treated Beech Wood in Hot Water
and Steam Mediums [Volume 2, Issue 1, 2011, Pages 27-38]
-
Hydrothermal treatment
Water Absorption and Thickness Swelling behavior of Medium Density Fiberboard Manufactured by Hydrothermally Treated Fibers [Volume 1, Issue 1, 2011, Pages 1-11]
-
Hydrothermal treatment
Collapsibility and Wettability of Hydrothermally Treated Wood [Volume 3, Issue 1, 2013, Pages 1-11]
-
Hydrothermal treatment
Investigation the Quality of Recycled Medium Density Fiber boards (MDF) via Two Different Method i.e. Hydrothermal and Ohmic heating [Volume 8, Issue 2, 2017, Pages 323-333]
-
Hydroxide sodium
The effect of alkali treatment of wheat straw powder on particle board properties made from mixing wheat straw and industrial wood chips [Volume 12, Issue 1, 2021, Pages 57-71]
-
Hypothesis testing
A New Method for Defect Detection on Images Captured from Wood Veneer: Optimization of Energy Function on Natural Texture Eliminated Image [Volume 6, Issue 2, 2015, Pages 299-309]
-
Hyrcanian forests
Anatomical, Biometrical, Physical and Chemical properties of wild service tree (Sorbus torminalis L.) (Case study: Sangdeh forests of Mazandaran) [Volume 9, Issue 4, 2018, Pages 597-608]
I
-
I-joist
The effect of dimensional changes of flange and web in I-joist on its bending strength [Volume 10, Issue 4, 2019, Pages 507-520]
-
Impact modifier
Effect of Impact Modifier Type on Water Absorption and Thickness Swelling Parameters of Wood Flour- Recycled Polypropylene Composites [Volume 2, Issue 2, 2011, Pages 115-24]
-
Impact strength
The effect of the presence of skin on the mechanical properties of milkweed wood flour-plastic composite [Volume 10, Issue 1, 2019, Pages 115-124]
-
Impedance tube
Assessing the effect of air- gap in acoustic panels’ sound absorption made of
date palm fiber (Phoenix dactylifera) [Volume 12, Issue 4, 2021, Pages 575-586]
-
Import
Investigation the factors influencing on demand for lumber imports in Iran [Volume 4, Issue 1, 2013, Pages 101-116]
-
Import
Evaluation of challenges of wood imports to Iran using Fuzzy Delphi Analytical Hierarchy Process [Volume 8, Issue 2, 2017, Pages 159-169]
-
Importation
The Asymmetric Impacts of Currency Shocks on Wood Imports and Wood Products in Iran with Emphasis on the Environment of Shock Formation [Volume 11, Issue 4, 2020, Pages 585-598]
-
Impregnation
Study on the potential use of nano-wollastonite to improve the fire resistance and dimensional stability of poplar wood (Populus nigra) [Volume 4, Issue 2, 2013, Pages 1-10]
-
Impregnation
Investigation the physical and mechanical properties of treated poplar wood (Populus deltoides) by wild pistachio tree resin [Volume 11, Issue 1, 2020, Pages 161-172]
-
Indicator
Preference of consumers in the selection of final woody products in different income quarters in households of Dorud City [Volume 9, Issue 2, 2018, Pages 175-185]
-
Industrial cluster
Evaluation of the geographical concentration of furniture industry in Iran with the aim of furniture cluster development [Volume 4, Issue 2, 2013, Pages 33-44]
-
Industrial panels
Particles from grapevine pruning residue as a bio-based substitute for wood in hybrid particleboard production [Volume 13, Issue 4, 2022, Pages 509-518]
-
Industrial Paper
Influence of using native starch through modification with α-amylase enzyme for surface paper sizing as an alternative to oxidized starch [Volume 11, Issue 3, 2020, Pages 433-443]
-
Industrial wood particles
Study on the Possibility of Using Sunflower Stalk in Particleboard Production [Volume 2, Issue 2, 2011, Pages 83-97]
-
Industrial wood particles
Using of mulberry branches
For particleboard manufacture [Volume 9, Issue 1, 2018, Pages 117-126]
-
Inflammation
Effect of Nano bentonite on Fire Retardant Properties of
Medium density fiberboard (MDF) [Volume 5, Issue 1, 2014, Pages 55-62]
-
Infrared spectroscopy
Investigation of the Amount of Tannic Acid in Bark Oak (Quercus castanifolia) [Volume 1, Issue 1, 2011, Pages 27-35]
-
Infrared spectroscopy
Long-term water absorption and thickness swelling and determine their characteristics in wood flour/polypropylene/Nano SiO2 nanocomposite [Volume 7, Issue 2, 2016, Pages 241-254]
-
Infrared spectroscopy
Poly-capro-lactone/poly-lactic acid/cellulose nano crystal three-component nanocomposites: Manufacturing, mechanical, dynamic-mechanical and morphological investigation [Volume 12, Issue 2, 2021, Pages 217-234]
-
Infrared spectroscopy
The effect of heat treatment on the physical, chemical and anatomical characteristics of date palm wood [Volume 14, Issue 2, 2023, Pages 155-167]
-
Inherent resistance
Investigation of the Natural Durability of Beech Wood by Meyer-Veltrup Model [Volume 14, Issue 4, 2023, Pages 377-387]
-
Initial spacing
The Effects of Agroforestry Practices on Physical Propertiesin of Poplus Wood in Radial and Longitudinal Axes [Volume 2, Issue 2, 2011, Pages 53-64]
-
Installing method face and edge of panel
Investigation on the Effect of Penetration Depth and Installing Method of Screw on Withdrawal Resistance in Face and Edge of Wood Plastic Composite [Volume 3, Issue 2, 2013, Pages 65-75]
-
Internal mixer
Investigating on Effect of Particle Form and Mixing Method on
applied Properties Green Composite [Volume 5, Issue 1, 2014, Pages 63-74]
-
Interphase region
Effect of species type and sanding sequence on the adhesion strength and the interphase region of Polyurethane coating and veneer [Volume 11, Issue 2, 2020, Pages 317-332]
-
Intra-industry trade
Investigating the status of wood and its products Intra-industry trade in Iran [Volume 10, Issue 1, 2019, Pages 125-141]
-
Ionic liquid
Dissolution and regeneration of lignocellulosic materials with ionic liquids
BMIMCl and ([BMIM] [MeSO4]) and determination some of mechanical and
physical properties [Volume 4, Issue 1, 2013, Pages 117-130]
-
Ionic liquid
The effect of dissolution time on wettability and certain properties of cellulose film produced using ionic liquid [Volume 9, Issue 2, 2018, Pages 223-234]
-
Iran
Identification and Evaluation of Oncoming Changes of Wood and Paper Industries of the Country [Volume 2, Issue 2, 2011, Pages 27-38]
-
Iran
Analysis of Location Quotient index of poplar wood processing value chain in Iran [Volume 7, Issue 1, 2016, Pages 141-154]
-
Iranian beech
Effect of heat-treatment with raw cotton seed oil on decay resistance and dimensional stability of Beech (Fagus orientalis) [Volume 6, Issue 1, 2015, Pages 119-131]
-
Iron oxide nanoparticles
Effects of Modified Iron Oxide Nanoparticles on the Thermal and Dynamic Mechanical Properties of Cellulose Poly(vinyl alcohol) Blend Films [Volume 6, Issue 2, 2015, Pages 251-263]
-
I-shaped beams
Reinforcement of I-Shaped Beams Constructed with Parallel Strand Lumber and Laminated Veneer Lumber Utilizing Glass Fiber Polymer [Volume 14, Issue 4, 2023, Pages 389-402]
-
Isocyanate resin (PMDI)
Study on the Possibility of Using Sunflower Stalk in Particleboard Production [Volume 2, Issue 2, 2011, Pages 83-97]
J
-
Jebel gypsum
Investigation of the type and content of gypsum on the dimensional stability and mechanical properties of gypsum particleboard [Volume 5, Issue 1, 2014, Pages 45-54]
-
Joints
Study on the tensile strength of ready-to-assemble and fixed corner joints on
medium density fiberboard [Volume 4, Issue 1, 2013, Pages 49-63]
-
Joints
The possibility of designing and constructing standard tables and chairs with palm trunk [Volume 10, Issue 4, 2019, Pages 575-587]
-
Joints
Investigation of shear strength of joints made of medium-density fiberboard and particleboard with screw connectors [Volume 14, Issue 4, 2023, Pages 329-338]
-
Joint withdrawal resistance
The predicting ultimate of joint withdrawal resistance constructed of plywood with regression models application according to diameter and penetrating depth [Volume 4, Issue 2, 2013, Pages 11-22]
-
Juniper
Investigation of growth dynamics of Juniper Trees in two Protected and Grazing areas in Jeyshabad, Zanjan, Iran Using Dendrochronology Method [Volume 12, Issue 1, 2021, Pages 83-94]
-
Juvenile Wood
Evaluation of Pulp and Paper Properties obtained from Maple Juvenile Wood through Organosolv Alcohol Method Catalyzed by Calcium and Magnesium Salts [Volume 6, Issue 1, 2015, Pages 31-40]
K
-
Kaolinite
The effect of kaolinite on the properties of lignocellulose superabsorbent from old corrugated container fiber fines [Volume 10, Issue 4, 2019, Pages 531-542]
-
Kenaf
Preparation and Characterization of Microcrystalline Cellulose (MCC)
from Kenaf and Cotton Stem [Volume 4, Issue 2, 2013, Pages 23-32]
-
Kenaf
Investigation on the Effect of Kenaf Core and Stalk Fiber on the Medium Density Fiber Board Properties Made of Poplar Fibers [Volume 2, Issue 2, 2011, Pages 99-110]
-
Kerf width
Evaluation of wood machining parameters and surface quality in cutting process by water jet without abrasive material [Volume 12, Issue 3, 2021, Pages 429-440]
-
Keywords: friction materials
Investigation of using rice hask and paper waste to make free copper brake lining [Volume 13, Issue 1, 2022, Pages 61-70]
-
Keywords: Paper
Evaluation of Strength, Optical and Antibacterial Properties of Treated Papers by Chitosan and Nano Zinc Oxide [Volume 12, Issue 1, 2021, Pages 145-162]
-
Key words: Wood plantation
Recognition and rating of effecting indexes on consumption of different sites poplar wood production in Iran for paper making industries [Volume 7, Issue 3, 2016, Pages 425-436]
-
Kiln schedule
Preparation of a Kiln Drying Schedule for Poplar (Populus nigra)
Lumber of 5 cm Thickness [Volume 1, Issue 2, 2011, Pages 13-25]
-
Kiln wood drying
Determination of Effective Criteria for Location Selection of Kiln Wood Drying Plants by AHP Technique [Volume 1, Issue 2, 2011, Pages 55-67]
-
Kitchen cabinet
Investigating the effective factors in making Kitchen cabinets made of wooden panel products [Volume 14, Issue 2, 2023, Pages 183-197]
-
Kluyveromyces marxianus
The effect of bagasse pith xylose on yeast growth kinetic in bio-products manufacture [Volume 9, Issue 1, 2018, Pages 41-51]
-
Knot
Comparison Study in the Clear Wood Estimation of the Beech tree trunk(Fagus orientalis Libsky) [Volume 10, Issue 1, 2019, Pages 11-19]
-
Kraft
Papermaking Properties of Carpinus betulus with kraft, Soda and Soda-Urea Pulping Processes [Volume 3, Issue 2, 2013, Pages 105-117]
-
Kraft
Comparing lignin derived from black liquors of alkaline sulfite-AQ, soda-AQ and kraft processes as a filler-extender in the poplar plywood [Volume 9, Issue 3, 2018, Pages 349-358]
-
Kraft lignin
Effect of Lignin Mixing Method on Physical and Mechanical Properties of Wood Flour- Polypropylene Composites [Volume 1, Issue 2, 2011, Pages 103-113]
L
-
Lactase enzyme
Effect of Lactase Enzyme on Delignification and Physical
Properties of OCC Pulp [Volume 3, Issue 2, 2013, Pages 157-170]
-
Laminated lumber reinforced with glass fiber polymer
Reinforcement of I-Shaped Beams Constructed with Parallel Strand Lumber and Laminated Veneer Lumber Utilizing Glass Fiber Polymer [Volume 14, Issue 4, 2023, Pages 389-402]
-
Laminate Veneer Lumber (LVL)
The effect of layer’s moisture content and pre-heating by microwave radiation on physical and mechanical properties of laminated veneer lumber [Volume 8, Issue 1, 2017, Pages 39-51]
-
Layered board
Study on the possibility of using bagasse in manufacture of sound-proof particleboard [Volume 3, Issue 1, 2013, Pages 43-52]
-
Layer Thickness
Effect of Faces Type and Thickness on Mechanical Properties
of Sandwich Panels [Volume 5, Issue 1, 2014, Pages 85-92]
-
Leaching
Study on Leaching of Copper Nanoparticles in Combined Impregnation- Densification Treatments of wood after Accelerated Aging [Volume 6, Issue 1, 2015, Pages 159-165]
-
Leaching
The evalaution of decay resistance and dimentional stability of poplar wood treated with Styrene/Nano wellastonite [Volume 10, Issue 3, 2019, Pages 445-455]
-
Lead
Evaluation of lignocellulose Nano-fiber absorbent efficacy in lead removal from aqueous solutions [Volume 9, Issue 2, 2018, Pages 251-262]
-
Lead
Investigation of the properties of modified lignin-derived porous carbon for Lead removal [Volume 14, Issue 3, 2023, Pages 327-338]
-
Life Cycle Assessment
assessment of environmental impacts in comfortable furniture production process using life cycle assessment (LCA) technique [Volume 7, Issue 3, 2016, Pages 475-485]
-
Life Cycle Assessment
Life cycle assessment of SMF and GMF Fluting paper production process [Volume 13, Issue 3, 2022, Pages 249-259]
-
Light frame
Study of Behavior and Measurement of Seismic Resistant Connections in Light Structural Frame Out of Aspen [Volume 3, Issue 1, 2013, Pages 81-97]
-
Lightweight concrete
Construction of lightweight and resistant concrete with silica and wooden particles [Volume 8, Issue 4, 2017, Pages 585-603]
-
Lignin
Vanillin Production from kraft Liquor of Pinus eldarica [Volume 4, Issue 1, 2013, Pages 143-150]
-
Lignin
Wood anatomy and physical and chemical properties of fast growing Athel tamarisk (Tamarix aphylla L.) [Volume 7, Issue 4, 2016, Pages 511-522]
-
Lignin
Comparing lignin derived from black liquors of alkaline sulfite-AQ, soda-AQ and kraft processes as a filler-extender in the poplar plywood [Volume 9, Issue 3, 2018, Pages 349-358]
-
Lignin
Chemical treatment of Bagasse by oxalic acid-choline chloride and lactic acid-choline chloride deep eutectic solvents [Volume 10, Issue 4, 2019, Pages 559-573]
-
Lignin
Effect of drought, fertilization, wounding and bending treatments on lignin content and composition of eucalyptus seedlings (Eucalyptus camaldulensis) [Volume 11, Issue 4, 2020, Pages 553-569]
-
Lignin
Recovery of lignin from Kraft black liquor in the methods oxygen and carbon dioxide pretreatment from hardwood Kraft black liquor [Volume 12, Issue 2, 2021, Pages 235-246]
-
Lignin
The Use of Maleated Lignin based Polyacid as Catalyst in Urea-Lignin-Glyoxal Wood Adhesive [Volume 12, Issue 3, 2021, Pages 351-361]
-
Lignin
Synthesis and characterization of aminated Lignin-based Hydrogel [Volume 12, Issue 4, 2021, Pages 551-560]
-
Lignin
Improvement of Physical and Mechanical Properties of Testliner Coated by Unmodified and Modified Lignins [Volume 14, Issue 1, 2023, Pages 1-15]
-
Lignin
Investigation of the properties of modified lignin-derived porous carbon for Lead removal [Volume 14, Issue 3, 2023, Pages 327-338]
-
Lignoboost
Extraction of lignin with lignoboost process and production of water-soluble sulfonated derivatives from lignin of bagasse soda black liquor [Volume 10, Issue 2, 2019, Pages 237-247]
-
Lignocellulose nano-fibers
Application of cellulosic nanofibers to replace with imported long- fiber pulps in paper made from bagasse [Volume 7, Issue 4, 2016, Pages 523-536]
-
Lignocellulose nanofibers
Evaluation of lignocellulose Nano-fiber absorbent efficacy in lead removal from aqueous solutions [Volume 9, Issue 2, 2018, Pages 251-262]
-
Lignocellulosic biomass
Effect of using Almond shell flour and OCC on the properties of the production briquette [Volume 14, Issue 4, 2023, Pages 415-431]
-
Lignocellulosic material
Study on the ability of lignocellulosic materials to absorb crude oil from aqueous media [Volume 11, Issue 2, 2020, Pages 255-267]
-
Lignocellulosic materials
Dissolution and regeneration of lignocellulosic materials with ionic liquids
BMIMCl and ([BMIM] [MeSO4]) and determination some of mechanical and
physical properties [Volume 4, Issue 1, 2013, Pages 117-130]
-
Lignocellulosic materials
Comparison of the effect of ozonation on the lignin removal of sugarcane bagasse and its unbleached paper pulp. [Volume 14, Issue 3, 2023, Pages 313-325]
-
Lignocellulosic nanocrystals (LCNCs)
Production of nanocrystals and nanofibrils from unbleached and bleached soda pulp with ECFlight bleaching sequence and comparison of their morphological and thermal properties [Volume 13, Issue 4, 2022, Pages 457-471]
-
Lignocellulosic Nanofiber
The Influence of Mixing Method of lignocellulosic Nanofibers with Recycled Pulp in the Presence of Microparticle System on the Final Paper Properties [Volume 13, Issue 1, 2022, Pages 103-113]
-
Lignocellulosic nanofibrils (LCNFs)
Production of nanocrystals and nanofibrils from unbleached and bleached soda pulp with ECFlight bleaching sequence and comparison of their morphological and thermal properties [Volume 13, Issue 4, 2022, Pages 457-471]
-
Likert scale
The study of Effective Factors On Selecting Finish Type and Color Spectrum and Finishing Method In The Industry Of Home Furniture (Case Study: Tehran Province) [Volume 13, Issue 2, 2022, Pages 147-160]
-
Likert scale spectra
Identification and Evaluation of Oncoming Changes of Wood and Paper Industries of the Country [Volume 2, Issue 2, 2011, Pages 27-38]
-
Liner
The potential of replacing the starch with soda and formacell lignins in surface sizing and evaluation of physical and mechanical properties of produced liner papers [Volume 12, Issue 4, 2021, Pages 453-464]
-
Linseed oil
Study of linseed oil on white poplar wood (Populus alba L.) as a traditional treatment for historical wooden relics against weathering [Volume 5, Issue 2, 2014, Pages 93-106]
-
Linseed oil
Effect of different oil heat treatment conditions on chemical structure and physical properties of wingnut (Pterocarya fraxinifolia) wood [Volume 11, Issue 2, 2020, Pages 199-209]
-
Liquefaction
Preparation of bio-polyols from lignocellulosic waste by liquefaction [Volume 9, Issue 3, 2018, Pages 313-321]
-
Liquor absorption
Evaluation of Effect of Steam Pretreatment on Water and Liquor Absorption of Wood Particles [Volume 2, Issue 2, 2011, Pages 111-120]
-
Livestock grazing
Investigation of growth dynamics of Juniper Trees in two Protected and Grazing areas in Jeyshabad, Zanjan, Iran Using Dendrochronology Method [Volume 12, Issue 1, 2021, Pages 83-94]
-
Load؛ Relative humidity
The effect of load and relative humidity on bending creep behaviour of hornbeam in three altitudes (Case Study, Nowshahr Meshelak Branch) [Volume 9, Issue 1, 2018, Pages 15-26]
-
Loblolly-pine
The model of multiple criteria decision making to determine the optimal product and identify target markets based on poplar, alder and loblolly-pine [Volume 10, Issue 2, 2019, Pages 189-203]
-
Location quotient
Analysis of Poplar process value chain in Western Azerbaijan province aims to upgrading [Volume 6, Issue 1, 2015, Pages 41-52]
-
Location quotient
Analysis of Location Quotient index of poplar wood processing value chain in Iran [Volume 7, Issue 1, 2016, Pages 141-154]
-
Log
Effects of protection treatments on prevent log checking (Case study: Kheyrud forest) [Volume 8, Issue 2, 2017, Pages 309-321]
-
Log
Comparison Study in the Clear Wood Estimation of the Beech tree trunk(Fagus orientalis Libsky) [Volume 10, Issue 1, 2019, Pages 11-19]
-
Long Fiber
Effect of Cationised Long Fibers as Additive On Mechanical Properties of CMP [Volume 4, Issue 1, 2013, Pages 161-170]
-
Longitudinal
Determination of Screw and Nail Withdrawal Strengths in Parallel and Perpendicular to Grain of some Hardwoods of Iran [Volume 3, Issue 2, 2013, Pages 171-180]
-
Long run elasticity
Analysis of Import Demand Function of Iranian Paper and Paperboard Using Bond Test [Volume 11, Issue 3, 2020, Pages 457-469]
-
Long-term water absorption
Long-term water absorption and thickness swelling and determine their characteristics in wood flour/polypropylene/Nano SiO2 nanocomposite [Volume 7, Issue 2, 2016, Pages 241-254]
-
Low density polyethylene
The Effect of wheat straw particle size on the mechanical and water absorption properties of wheat straw/low density polyethylene biocomposites for packaging applications [Volume 8, Issue 2, 2017, Pages 253-265]
-
Low density polyethylene (LDPE)
Effect of Bagasse Chemical Pulping and Coupling Agent on the Physical - Mechanical Properties of Composites Based on Bagasse pulp/Low density polyethylene [Volume 7, Issue 3, 2016, Pages 349-362]
-
LSL
Technical evaluation of pure and combined glulam beams based on LSL made from date palm rachies [Volume 14, Issue 3, 2023, Pages 253-269]
-
L-type joints
Investigation on bending moment capacity of corner joints constructed with spline under diagonal tension and compression [Volume 8, Issue 4, 2017, Pages 521-532]
-
L-type joints
Analysis of stress- strain distribution of dowel and glue line in L-type furniture joint by means of finite element method [Volume 8, Issue 2, 2017, Pages 297-307]
-
Lumber
Investigation the factors influencing on demand for lumber imports in Iran [Volume 4, Issue 1, 2013, Pages 101-116]
M
-
Machining
Investigation and Evaluation on Influence of Machining (CNC) Conditions on Surface Quality of Paulownia Wood [Volume 2, Issue 2, 2011, Pages 1-13]
-
Machining parameters
Sliding table panel saw, Machining parameters, Sound level meter, Ergonomics, Sound emission [Volume 12, Issue 4, 2021, Pages 465-479]
-
Magnetic paper
Evaluation of antibacterial performance of iron oxide nanoparticles stabilized by biodegradable lignocellulosic materials [Volume 12, Issue 3, 2021, Pages 337-350]
-
Magnetic Properties
Effects of Modified Iron Oxide Nanoparticles on the Thermal and Dynamic Mechanical Properties of Cellulose Poly(vinyl alcohol) Blend Films [Volume 6, Issue 2, 2015, Pages 251-263]
-
Major importers
Studying Imports of Wood, Paper and their Products in the World and Iran from 1998 to 2007 [Volume 1, Issue 2, 2011, Pages 37-54]
-
Maleic Anhydride Polypropylene
Investigation adding of Nano clay particles and compatibilizer on the properties of composite made of polypropylene- Haloxylon wood flour [Volume 7, Issue 3, 2016, Pages 335-348]
-
Maple
Evaluation of Pulp and Paper Properties obtained from Maple Juvenile Wood through Organosolv Alcohol Method Catalyzed by Calcium and Magnesium Salts [Volume 6, Issue 1, 2015, Pages 31-40]
-
Mass reduction
Investigation of using rice hask and paper waste to make free copper brake lining [Volume 13, Issue 1, 2022, Pages 61-70]
-
Mathematical model
Establishing mathematical model withdrawal resistance of wooden dowel in
plywood [Volume 4, Issue 1, 2013, Pages 37-47]
-
Mazandaran
Anatomical, Biometrical, Physical and Chemical properties of wild service tree (Sorbus torminalis L.) (Case study: Sangdeh forests of Mazandaran) [Volume 9, Issue 4, 2018, Pages 597-608]
-
Mazandaran province
Location Selection for Hardboard Industry in Mazandaran Province [Volume 2, Issue 2, 2011, Pages 65-81]
-
MDF
Nondestructive evaluation of acoustical and mechanical properties of bagasse fiber composites by flexural vibration method (Lohe Sabz & Karoon factories) [Volume 6, Issue 2, 2015, Pages 217-226]
-
MDF
Study on long term creep of two different types of compressed wood sheets used in library shelves [Volume 7, Issue 3, 2016, Pages 437-447]
-
MDF
Investigation on bending moment capacity of corner joints constructed with spline under diagonal tension and compression [Volume 8, Issue 4, 2017, Pages 521-532]
-
MDF
Evaluation of resistance of wooden biscuit joints in mediumdensity fiberboard and particleboard under tensile and shear loads in T and L-type members [Volume 13, Issue 2, 2022, Pages 187-200]
-
MDF
Investigation of shear strength of joints made of medium-density fiberboard and particleboard with screw connectors [Volume 14, Issue 4, 2023, Pages 329-338]
-
MDF board
Stiffness changes in MDF kitchen cabinet after accelerated aging test [Volume 4, Issue 1, 2013, Pages 131-141]
-
MDF dust
Investigation on the withdrawal strength of screw, nail and water absorption of Nanoclay-MDF dust-PP composite [Volume 3, Issue 1, 2013, Pages 52-66]
-
MDF frame
Improvement of the bending moment capacity of mitered MDF frame under diagonal tension by using of the densified poplar dowel [Volume 12, Issue 4, 2021, Pages 561-573]
-
MDF wastes
Recycling of waste MDF via digester and production of nanocrystalline cellulose from recycled fibers [Volume 12, Issue 2, 2021, Pages 271-282]
-
MDF wastes
Structural properties and thermal stability of nano crystalline cellulose produced from waste paper [Volume 13, Issue 1, 2022, Pages 37-47]
-
Mechanical
Comparing the effect of cell wall modification with glycidyl methacrylate and maleic anhydride on the physical, mechanical and biological properties of poplar wood-styrene polymer composite [Volume 12, Issue 2, 2021, Pages 259-270]
-
Mechanical and physical properties
Investigation adding of Nano clay particles and compatibilizer on the properties of composite made of polypropylene- Haloxylon wood flour [Volume 7, Issue 3, 2016, Pages 335-348]
-
Mechanical and physical properties
Effect of poly lactic acid on physical and mechanical properties of wood plastic composite [Volume 10, Issue 2, 2019, Pages 261-272]
-
Mechanical and physical properties
Investigation of the use of tetramethyl orthosilicate (Alkoxysilane) on compatibility, mechanical and physical properties of wood-cement particleboard [Volume 13, Issue 4, 2022, Pages 419-431]
-
Mechanical and water absorption properties
The Effect of wheat straw particle size on the mechanical and water absorption properties of wheat straw/low density polyethylene biocomposites for packaging applications [Volume 8, Issue 2, 2017, Pages 253-265]
-
Mechanical properties
Evaluation of the Effect of Endoglucanase Refining on the Physical and Mechanical Properties of Paper Made from OCC Pulp [Volume 4, Issue 2, 2013, Pages 111-122]
-
Mechanical properties
Effect of Faces Type and Thickness on Mechanical Properties
of Sandwich Panels [Volume 5, Issue 1, 2014, Pages 85-92]
-
Mechanical properties
A Study on Physical and Mechanical Properties of Medium-Density Fiberboard (MDF) Made from Corn stalk and Wood fibers [Volume 2, Issue 2, 2011, Pages 39-52]
-
Mechanical properties
Investigation on the Physical and Mechanical Properties of Composites from Combined Recycled ONP-Glass Fibers with Polypropylene [Volume 3, Issue 1, 2013, Pages 29-42]
-
Mechanical properties
The Survey of Chemical Paper Pulp Properties Produced from Rice Straw Based on Formaldehyde Sulfide Method. [Volume 3, Issue 2, 2013, Pages 13-23]
-
Mechanical properties
Papermaking Properties of Carpinus betulus with kraft, Soda and Soda-Urea Pulping Processes [Volume 3, Issue 2, 2013, Pages 105-117]
-
Mechanical properties
Properties Evaluation of High Density Polyethylene Composite Filled with Bagasse after Accelerated Weathered [Volume 3, Issue 2, 2013, Pages 119-130]
-
Mechanical properties
Effect of Nano-Zinc Oxide on the Physical and Mechanical properties of
Paulownia Wood (Paulownia fortunei) [Volume 4, Issue 1, 2013, Pages 77-85]
-
Mechanical properties
The effect of chemical treatment and compression percent on mechanical properties of Paulownia compressed wood [Volume 5, Issue 2, 2014, Pages 59-70]
-
Mechanical properties
Evaluation of elevated temperature influence on mechanical properties of a commercial unrefined bagasse fiber-polypropylene composite [Volume 5, Issue 2, 2014, Pages 119-130]
-
Mechanical properties
Investigation on the effect of mixed rapeseed stalk residues with wood particles, and mixing of melamine and urea formaldehyde resin on properties of manufactured particleboard [Volume 7, Issue 2, 2016, Pages 167-178]
-
Mechanical properties
Evalution Prosopis juliflora(Somr) potential in Kraft Pulping [Volume 7, Issue 1, 2016, Pages 43-54]
-
Mechanical properties
Optimization of properties of cement-bonded particleboard manufactured from cotton stalk and sawdust containing calcium chloride CaCl2 as an additive [Volume 7, Issue 1, 2016, Pages 55-68]
-
Mechanical properties
The influence of treatment and shelling ratio on the mechanical properties of particleboard manufactured from Canola (Brassica napus) stalk particles [Volume 7, Issue 2, 2016, Pages 255-270]
-
Mechanical properties
Using cellulose nanofiber as filler of urea formaldehyde resin in plywood manufacture [Volume 6, Issue 2, 2015, Pages 227-237]
-
Mechanical properties
Effect of Bagasse Chemical Pulping and Coupling Agent on the Physical - Mechanical Properties of Composites Based on Bagasse pulp/Low density polyethylene [Volume 7, Issue 3, 2016, Pages 349-362]
-
Mechanical properties
Effect of nano zinc oxide on physical and mechanical properties of wood plastic composites [Volume 8, Issue 1, 2017, Pages 15-24]
-
Mechanical properties
Effect of cell wall modification of styrene wood polymer with maleic anhydride and glycidyl methacrylate on thermal stability, mechanical behavior and biological resistance of composite [Volume 7, Issue 4, 2016, Pages 601-614]
-
Mechanical properties
Effect of Recycling Process on Physical and Mechanical Properties of Wood Flour High-density Polyethylene Composites [Volume 8, Issue 3, 2017, Pages 335-347]
-
Mechanical properties
The Study of mechanical and morphological properties of recycled polyethylene/saw dust from cutting of MDF composites [Volume 8, Issue 2, 2017, Pages 185-195]
-
Mechanical properties
Fire performance, mechanical strength and dimensional stability of wood flour–polyethylene composites under the influence of different fire retardants [Volume 8, Issue 1, 2017, Pages 145-158]
-
Mechanical properties
Study of Biodegradability and Mechanical Properties of Polyvinyl Alcohol (PVA) Reinforced Celloluse Nanofiber (CNF) [Volume 8, Issue 4, 2017, Pages 497-508]
-
Mechanical properties
The effect of dissolution time on wettability and certain properties of cellulose film produced using ionic liquid [Volume 9, Issue 2, 2018, Pages 223-234]
-
Mechanical properties
The Effect of Storage Time of Hornbeam Billet Wood on its Physical and Mechanical Properties in the Forest (Case Study of Gorgan Shastkalateh Forest) [Volume 9, Issue 4, 2018, Pages 511-524]
-
Mechanical properties
Effect of calendering on physical and mechanical properties of coated papers [Volume 10, Issue 2, 2019, Pages 273-285]
-
Mechanical properties
Evaluation and comparision of mechanical and barrier properties of stone paper and gloss paper [Volume 10, Issue 3, 2019, Pages 373-384]
-
Mechanical properties
Utilization of recycled fibers from MDF wastes and waste paper for manufacturing fiberboard and the effect of poly vinyl acetate on its practical properties [Volume 11, Issue 2, 2020, Pages 173-183]
-
Mechanical properties
Effect of densification on the practical properties of chemical and thermal modified poplar wood [Volume 11, Issue 2, 2020, Pages 185-197]
-
Mechanical properties
Using Zeolite as a Filler with Chitosan Biopolymer in Papermaking [Volume 11, Issue 3, 2020, Pages 407-417]
-
Mechanical properties
Investigating the effect of refining on cellulase enzyme activity on the properties of OCC pulp [Volume 11, Issue 4, 2020, Pages 543-552]
-
Mechanical properties
Effect of Blending Butylacrylate with Unsaturated Polyester Resin on Toughness of Matrix and Mechanical Properties of Kenaf and Glass Fiber- based Composites [Volume 11, Issue 4, 2020, Pages 669-682]
-
Mechanical properties
The possibility of using zeolite as a retarder of particleboard obtained from sugarcane pulp [Volume 12, Issue 3, 2021, Pages 309-321]
-
Mechanical properties
Investigation of the effect of nano-silica deposition on cellulose fibers , the mechanical properties of autoclaved cement composites in industrial scale [Volume 12, Issue 3, 2021, Pages 419-428]
-
Mechanical properties
Investigation on the mechanical and optical properties of kraft paper coated with a combination of pectin, polyvinyl alcohol and nano titanium dioxide [Volume 13, Issue 1, 2022, Pages 15-25]
-
Mechanical properties
The Influence of Mixing Method of lignocellulosic Nanofibers with Recycled Pulp in the Presence of Microparticle System on the Final Paper Properties [Volume 13, Issue 1, 2022, Pages 103-113]
-
Mechanical properties
Effect of altitude on biometric, physical and mechanical properties of caucasian alder species (Case study in Savadkuh region) [Volume 13, Issue 2, 2022, Pages 239-248]
-
Mechanical properties
Identification and determination of the effect of factory control variables on the physical and mechanical properties of medium density fiberboard with artificial neural network system [Volume 13, Issue 3, 2022, Pages 275-287]
-
Mechanical properties
Comparison of physical and mechanical properties of Pinus taeda wood with common fast-growing species [Volume 13, Issue 3, 2022, Pages 345-359]
-
Mechanical properties
Designing, Manufacturing and mechanical investigating of joint in laminated stringer of spiral stairs from poplar wood [Volume 13, Issue 3, 2022, Pages 375-391]
-
Mechanical properties
The effect of heat treatment on anatomical, physical, color and mechanical properties of birch wood [Volume 13, Issue 4, 2022, Pages 519-529]
-
Mechanical properties
The Effect of spray coating and freezing of brown liner paper on its physical and mechanical properties [Volume 14, Issue 1, 2023, Pages 31-40]
-
Mechanical properties
Investigation on coating of paper with biodegradable polymers and Zinc Oxide nanoparticles on its mechanical and barrier properties [Volume 14, Issue 1, 2023, Pages 97-111]
-
Mechanical properties
Investigation of Soluble copper nanoparticles effects in Construction Five-layer boards [Volume 14, Issue 4, 2023, Pages 351-362]
-
Mechanical properties
Investigation of the physical, mechanical and morphological properties of the foam obtained from polylactic acid and microcrystalline cellulose [Volume 14, Issue 4, 2023, Pages 403-413]
-
Mechanical resistance
Investigation of the effect of nano-wollastonite on moisture resistance in sealer-killer and sealer-semi-polyester paints on Fagus orientalis, Abies and Populus spp Salicacea species [Volume 12, Issue 2, 2021, Pages 175-184]
-
Mechanical Strenght Features
Influence of the Alkalified Tragacanth Gum on optical and Mechanical Strenght of the Historical Paper Documents [Volume 9, Issue 2, 2018, Pages 209-222]
-
Mechanical Strength
Effect of Weathering Time on the Physical - Mechanical Properties and Color Change in Wood Flour/HDPE Composite [Volume 5, Issue 1, 2014, Pages 75-83]
-
Mechanical Strength
A Study on Creep Behavior of a Wood Flour-Polypropylene-Nanoclay Hybrid Composite [Volume 7, Issue 1, 2016, Pages 1-12]
-
Mechanical Strength
Investigation Some of Physical and Mechanical Properties of Polypropylene Fiber/ Wood /Cement Composites [Volume 7, Issue 2, 2016, Pages 207-217]
-
Mechanical Strength
Investigation of the impact resistance of the plywood made with adhesive enhanced with Cellulose Nanofibers [Volume 9, Issue 2, 2018, Pages 263-275]
-
Mechanical Strength
The effect of nano graphene particles on the Physical and mechanical of high density polyethylene-rapeseed stalk flour composites [Volume 10, Issue 4, 2019, Pages 629-641]
-
Mechanical Strengths
Determination of The Optimum Use of Cationic Starch on the Basis of the Mechanical Strengths of Mixed OCC and Virgin NSSC pulps [Volume 2, Issue 2, 2011, Pages 121-133]
-
Medium density fiberboard
Investigation of physical, mechanical properties and formaldehyde emission of medium density fiberboard manufactured from urea formaldehyde resin reinforced with nanocrystalline cellulose [Volume 8, Issue 2, 2017, Pages 197-209]
-
Medium density fiberboard
Energy Consumption Analysis in Production of bagasse and greenhouse gas emission (GHG) assessment from this product and Medium Density Fiberboard based on it [Volume 11, Issue 3, 2020, Pages 471-483]
-
Medium density fiberboard
Identification and determination of the effect of factory control variables on the physical and mechanical properties of medium density fiberboard with artificial neural network system [Volume 13, Issue 3, 2022, Pages 275-287]
-
Medium density fiberboard
Effect of Mixing Zeolite Compounds in Manufacturing Process of Medium Density Fiberboard on Physical and Mechanical Properties [Volume 14, Issue 1, 2023, Pages 41-53]
-
Medium Density Fiber board
Investigation the Quality of Recycled Medium Density Fiber boards (MDF) via Two Different Method i.e. Hydrothermal and Ohmic heating [Volume 8, Issue 2, 2017, Pages 323-333]
-
Medium Density Fiberboard (MDF)
Water Absorption and Thickness Swelling behavior of Medium Density Fiberboard Manufactured by Hydrothermally Treated Fibers [Volume 1, Issue 1, 2011, Pages 1-11]
-
Medium Density Fiberboard (MDF)
The Potential Use of Nanozycosil and Sodium Montmorillonite (NaMMT) Nanoclay to Decrease Water Absorption in MDF [Volume 1, Issue 2, 2011, Pages 69-81]
-
Medium Density Fiberboard (MDF)
Identification of Cleaner Production criteria at Kimia Choob Medium Density Fiber Board [Volume 11, Issue 2, 2020, Pages 225-240]
-
Medium-Density Fiberboard (MDF)
Effect of Nano bentonite on Fire Retardant Properties of
Medium density fiberboard (MDF) [Volume 5, Issue 1, 2014, Pages 55-62]
-
Melamine formaldehyde resin
Investigating the effect of pH changes and molar ratio on the properties of melamine formaldehyde resin for impregnating decoration paper [Volume 14, Issue 4, 2023, Pages 363-376]
-
Melamine laminate
Study on Flexural Creep Parameters of Overlayed Particleboard by Natural and Melaminated Veneers [Volume 3, Issue 1, 2013, Pages 119-128]
-
Methylcellulose glue
Identify function methyl cellulose glue of rehabilitation and activation in preparation Tissues used in restoration paper works [Volume 8, Issue 2, 2017, Pages 171-183]
-
Methylene blue
Investigation of isotherm and kinetic of methylene blue adsorption by Tobacco residues activated carbon/ZnO nanocomposites with non-linear method [Volume 11, Issue 1, 2020, Pages 71-83]
-
Methylene blue
Use of titanium dioxide nanoparticles and aqueous methylene blue on ECF bleaching of bagasse pulp [Volume 11, Issue 2, 2020, Pages 211-224]
-
Micro-cellular foam
Investigation of the physical, mechanical and morphological properties of the foam obtained from polylactic acid and microcrystalline cellulose [Volume 14, Issue 4, 2023, Pages 403-413]
-
Micro-distribution
Effect of Surface Densification on Treatability of Scots pine Wood and Micro-Distribution of Impregnating Liquid [Volume 11, Issue 1, 2020, Pages 57-69]
-
Microencapsulation
Microencapsulation of Zataria multiflora thyme essential oil to improve its antifungal efficiency by controlled release mechanism [Volume 8, Issue 4, 2017, Pages 563-571]
-
Micronize gypsum
Investigation of the type and content of gypsum on the dimensional stability and mechanical properties of gypsum particleboard [Volume 5, Issue 1, 2014, Pages 45-54]
-
Microparticles
The Influence of Mixing Method of lignocellulosic Nanofibers with Recycled Pulp in the Presence of Microparticle System on the Final Paper Properties [Volume 13, Issue 1, 2022, Pages 103-113]
-
Microwave Radiation
The effect of layer’s moisture content and pre-heating by microwave radiation on physical and mechanical properties of laminated veneer lumber [Volume 8, Issue 1, 2017, Pages 39-51]
-
Microwave Radiation
Investigation on the Possibility of Physical and Mechanical Properties Modification of Wood-Plastic Nanocomposites By Microwave Radiation [Volume 13, Issue 3, 2022, Pages 261-273]
-
Midpoint Index
Life cycle assessment of SMF and GMF Fluting paper production process [Volume 13, Issue 3, 2022, Pages 249-259]
-
Milkweed flour
The effect of the presence of skin on the mechanical properties of milkweed wood flour-plastic composite [Volume 10, Issue 1, 2019, Pages 115-124]
-
Miter joint
Investigating the Stress Carrying Capacity of Corner Joints In The
Furniture Frame Fabricated With Dowel [Volume 5, Issue 1, 2014, Pages 21-32]
-
Miter joint
Investigating the stress carrying capacity of miter corner joints made with biscuit under diagonal tension and compression loading [Volume 10, Issue 3, 2019, Pages 323-336]
-
Mixing method
The Influence of Mixing Method of lignocellulosic Nanofibers with Recycled Pulp in the Presence of Microparticle System on the Final Paper Properties [Volume 13, Issue 1, 2022, Pages 103-113]
-
Mixing temperature
Effect of Mixing Temperature of CMP Pulp and Cellulose Nanofiber on Paper Properties [Volume 3, Issue 2, 2013, Pages 77-90]
-
Modeling
Modeling and Predicting the optimal conditions in microcrystal cellulose production from bagasse using the Response Surface Methodology (RSM) [Volume 13, Issue 2, 2022, Pages 225-238]
-
Modification
Cationic precipitated calcium carbonate (PCC) synthesis using simultaneous modification [Volume 11, Issue 1, 2020, Pages 33-43]
-
Modification of pulping liquor
The product of pulp from hornbeam with alkaline sulfite- AQ process [Volume 10, Issue 4, 2019, Pages 479-494]
-
Moduli of elasticity
The effect of electric shock on the physical and mechanical properties of beech wood [Volume 11, Issue 3, 2020, Pages 355-363]
-
Moduli of elasticity
Modification of The Beech (Fagus orientalis) Wood Properties via Electricity [Volume 13, Issue 1, 2022, Pages 27-35]
-
Moduli of Rapture
The effect of electric shock on the physical and mechanical properties of beech wood [Volume 11, Issue 3, 2020, Pages 355-363]
-
Moduli of Rapture
Modification of The Beech (Fagus orientalis) Wood Properties via Electricity [Volume 13, Issue 1, 2022, Pages 27-35]
-
Modulus of Elasticity
The Effect of Chemical Modification with Phenol Formaldehyde and Compression on Mechanical Properties of Paulownia (P.fortunie) Wood [Volume 3, Issue 1, 2013, Pages 13-27]
-
Modulus of Elasticity
An artificial neural network model for predicting modulus of elasticity and modulus of rupture of particleboard comparison with a multiple linear regression model [Volume 12, Issue 2, 2021, Pages 283-297]
-
Modulus of elasticity (MOE)
An investigation on anatomical and mechanical properties of vascular bundles in Date palm (case study: Ahvaz countryside) [Volume 8, Issue 1, 2017, Pages 109-118]
-
Modulus of rapture
The Effect of Chemical Modification with Phenol Formaldehyde and Compression on Mechanical Properties of Paulownia (P.fortunie) Wood [Volume 3, Issue 1, 2013, Pages 13-27]
-
Modulus of rupture
The Effect of Face and Adhesive Types on Mechanical Properties of
Sandwich Panels Made from Honeycomb Paper [Volume 4, Issue 2, 2013, Pages 141-152]
-
Modulus of rupture
An artificial neural network model for predicting modulus of elasticity and modulus of rupture of particleboard comparison with a multiple linear regression model [Volume 12, Issue 2, 2021, Pages 283-297]
-
MOE
Influence of Heat Treatment Conditions on Strength Properties of Poplar Wood (Populus deltoides) [Volume 2, Issue 2, 2011, Pages 161-170]
-
MOE
Evaluation of bending performance for cross laminated timber (CLT) made out of poplar (Populus alba) [Volume 8, Issue 1, 2017, Pages 67-78]
-
Moisture content
Comparison of non-woody biomass properties for energy generation [Volume 10, Issue 4, 2019, Pages 617-628]
-
Moisture diffusion coefficients
Effect of Impact Modifier Type on Water Absorption and Thickness Swelling Parameters of Wood Flour- Recycled Polypropylene Composites [Volume 2, Issue 2, 2011, Pages 115-24]
-
Moisture gradient
Moisture induced stresses in cross laminated timers (CLT) made from hydrothermally modified fir wood [Volume 13, Issue 4, 2022, Pages 497-507]
-
Moisture induced stresses
Moisture induced stresses in cross laminated timers (CLT) made from hydrothermally modified fir wood [Volume 13, Issue 4, 2022, Pages 497-507]
-
Molecular weight
Identification and Evaluation of characteristics of Fractions of Industrial Softwood Kraft Lignin Separated by Single Step Fractionation [Volume 10, Issue 2, 2019, Pages 297-309]
-
Monoethanolamine pulping
Investigation on the Influence of Alkaline Pre-Extraction of Barley Straw on Soda and Monoethanolamine Pulps Properties [Volume 9, Issue 4, 2018, Pages 485-495]
-
Montmorillonite
Investigating the resistance and optical properties of papers coated with carboxymethyl cellulose and montmorillonite combination [Volume 14, Issue 2, 2023, Pages 215-226]
-
MOR
Influence of Heat Treatment Conditions on Strength Properties of Poplar Wood (Populus deltoides) [Volume 2, Issue 2, 2011, Pages 161-170]
-
MOR
Evaluation of bending performance for cross laminated timber (CLT) made out of poplar (Populus alba) [Volume 8, Issue 1, 2017, Pages 67-78]
-
Morphology
Investigation on the Effect of Chemical Foaming agent and Wood Flour content on Mechanical Properties, Density and Cell morphology of HDPE/EVA/ Wood Flour Hybrid Foamed Composites [Volume 2, Issue 1, 2011, Pages 63-80]
-
Morphology
A Study on Creep Behavior of a Wood Flour-Polypropylene-Nanoclay Hybrid Composite [Volume 7, Issue 1, 2016, Pages 1-12]
-
Morphology
The effect of different drying methods on cellulosic nanofibers and resulting composites [Volume 6, Issue 2, 2015, Pages 285-298]
-
Morphology
The effect of chemical treatment of wood flour on some of properties of wood plastic composite [Volume 7, Issue 3, 2016, Pages 449-462]
-
Morphology
Cationic precipitated calcium carbonate (PCC) synthesis using simultaneous modification [Volume 11, Issue 1, 2020, Pages 33-43]
-
Morphology
The effect of nano graphene particles on the Physical and mechanical of high density polyethylene-rapeseed stalk flour composites [Volume 10, Issue 4, 2019, Pages 629-641]
-
Mortise and loose tenon joint
Effect of shoulder thickness on bending moment capacity of mortise and loose
tenon joint [Volume 4, Issue 1, 2013, Pages 65-75]
-
Mortise and Tenon
The possibility of designing and constructing standard tables and chairs with palm trunk [Volume 10, Issue 4, 2019, Pages 575-587]
-
Morus alba
Changes of Biometric, Physical and Anatomical Properties of juvenile wood and mature wood of Morus alba tree in Longitudinal and Transverse Directions [Volume 11, Issue 2, 2020, Pages 305-316]
-
MOW DIP
Carboxymethyl Cellulose (CMC) Preparation from Mixed Office Wastepaper Deinked and Bleached Bagasse pulps: Characterization and Comparison [Volume 7, Issue 3, 2016, Pages 311-321]
-
Mulberry
Effect of coating with Shellac on acoustic properties in white mulberry wood [Volume 9, Issue 1, 2018, Pages 27-40]
-
Mulberry branches
Using of mulberry branches
For particleboard manufacture [Volume 9, Issue 1, 2018, Pages 117-126]
-
Multiple Linear Regression
An artificial neural network model for predicting modulus of elasticity and modulus of rupture of particleboard comparison with a multiple linear regression model [Volume 12, Issue 2, 2021, Pages 283-297]
-
Multi-ply boards
Production of Multi-ply Paperboard from Old Corrugated Container Pulp and Application of Fine Materials in the Middle Layer [Volume 11, Issue 1, 2020, Pages 109-119]
-
Multiply Paper
Effect of Applying Cellulose Nanofibers on the Properties of Multiply Paper Made from Recycled Fibers [Volume 9, Issue 3, 2018, Pages 359-369]
N
-
Nail
Determination of Screw and Nail Withdrawal Strengths in Parallel and Perpendicular to Grain of some Hardwoods of Iran [Volume 3, Issue 2, 2013, Pages 171-180]
-
Nail laminated timber
Withdrawal resistance and lateral shear strength of the nail connector in cypress wood (Cupressus arizonica ) treated with ACC and ACQ with emphasis on the use in NLT [Volume 14, Issue 2, 2023, Pages 113-125]
-
Nano
EFFECT OF DRY- HEAT AND MOIST-HEAT AGING ON PROPERTIES OF PAPERS TREATED WITH NANO CALCIUM HYDROXIDE AND NANO CHITOSAN [Volume 9, Issue 2, 2018, Pages 277-288]
-
Nano-Bentonit
Effect of Nano bentonite on Fire Retardant Properties of
Medium density fiberboard (MDF) [Volume 5, Issue 1, 2014, Pages 55-62]
-
Nano cellulose
Improving Weathering Performance of Beech Wood Coated with Acrylic Paint by nano zinc oxide and nano cellulose [Volume 10, Issue 2, 2019, Pages 311-321]
-
Nano cellulose
The effect of cellulose nano-fibers and Cationic starch on optical and mechanical properties of chemi-mechanical pulp [Volume 11, Issue 3, 2020, Pages 445-456]
-
Nanocellulose
Production of Nanocellulose from Rice Husk [Volume 4, Issue 2, 2013, Pages 153-163]
-
Nanocellulose
The effect of type and mixture of resin on the properties of impregnated paper [Volume 8, Issue 1, 2017, Pages 25-38]
-
Nanocellulose
Production of zein, chitosan, nanocellulose Nanocomposite , dynamic analysis and glass transition temperature [Volume 8, Issue 3, 2017, Pages 471-481]
-
Nanocellulose
Nanocellulose based biohydrogel: Preparation and characterization of some properties [Volume 9, Issue 4, 2018, Pages 497-509]
-
Nanocellulose
Evaluation of the starch films containing cellulose and lignocellulose for food packaging [Volume 10, Issue 1, 2019, Pages 35-47]
-
Nanocellulose
Investigation of releasing mechanism of silver nitrate in the nanocellulose based hydrogel pad for burn healing [Volume 11, Issue 2, 2020, Pages 333-344]
-
Nanocellulose fibers
Investigation of the impact resistance of the plywood made with adhesive enhanced with Cellulose Nanofibers [Volume 9, Issue 2, 2018, Pages 263-275]
-
Nano-chitosan
The investigation of the spraying of cellulose nanofibers (CNF) and Nano chitosan on the properties writing & printing (W&P) Paper [Volume 10, Issue 2, 2019, Pages 249-260]
-
Nano- Chitosan
Improving the Antibacterial Effect of Pomegranate Peel Extract with Nano-chitosan Using Encapsulation Technique in Sanitary Papermaking [Volume 11, Issue 4, 2020, Pages 513-532]
-
Nano clay
The effect of nanoclay particles and compatibilization of oxidized polypropylene in molten phase on the mechanical and physical properties of wood-plastic composite [Volume 9, Issue 1, 2018, Pages 137-151]
-
Nanoclay
The Potential Use of Nanozycosil and Sodium Montmorillonite (NaMMT) Nanoclay to Decrease Water Absorption in MDF [Volume 1, Issue 2, 2011, Pages 69-81]
-
Nanoclay
Investigation on the withdrawal strength of screw, nail and water absorption of Nanoclay-MDF dust-PP composite [Volume 3, Issue 1, 2013, Pages 52-66]
-
Nanoclay
The Effect of Nanoclay on Physicochemical, Mechanical and Thermal Properties of New Urea- Glyoxal Resin [Volume 6, Issue 1, 2015, Pages 133-143]
-
Nanoclay
A Study on Creep Behavior of a Wood Flour-Polypropylene-Nanoclay Hybrid Composite [Volume 7, Issue 1, 2016, Pages 1-12]
-
Nanoclay
The effect of using the textile waste fibers and nanoclay particles on physical and mechanical properties of composite made from wood flour/polypropylene [Volume 6, Issue 1, 2015, Pages 1-12]
-
Nanoclay
The effect of Nano clay and coupling agent on the physical and mechanical properties of polypropylene waste paper composites [Volume 7, Issue 2, 2016, Pages 193-206]
-
Nanoclay
study of antibacterial effects and physical characters of paper coated with nanoclay and homogenized nanoclay [Volume 7, Issue 4, 2016, Pages 561-572]
-
Nanoclay
The Effect of Nanoclay on Physical and Mechanical Properties of Particleboard Made from Urea-Kraft Lignin- Glyoxal Green Wood Adhesive [Volume 8, Issue 1, 2017, Pages 119-129]
-
Nano-Clay Particles
Investigation adding of Nano clay particles and compatibilizer on the properties of composite made of polypropylene- Haloxylon wood flour [Volume 7, Issue 3, 2016, Pages 335-348]
-
Nano-composite
Application of nano-titanium dioxide in the manufacture of Photocatalyst Securities Paper by controlled hydrolysis method [Volume 10, Issue 1, 2019, Pages 21-34]
-
Nanocomposite
Effects of cellulose nano crystal addition on the properties of polyhydroxybutyrate-co-valerate (PHBV) films [Volume 10, Issue 1, 2019, Pages 153-164]
-
Nanocomposite
Investigation of isotherm and kinetic of methylene blue adsorption by Tobacco residues activated carbon/ZnO nanocomposites with non-linear method [Volume 11, Issue 1, 2020, Pages 71-83]
-
Nano-Composite Hydrogel
Hydrogel composite based on thermal modified carboxymethyl cellulose and nanozeolite [Volume 13, Issue 4, 2022, Pages 433-443]
-
Nanocomposites
Poly-capro-lactone/poly-lactic acid/cellulose nano crystal three-component nanocomposites: Manufacturing, mechanical, dynamic-mechanical and morphological investigation [Volume 12, Issue 2, 2021, Pages 217-234]
-
Nanocomposites
Investigation of biodegradability behavior, thermal properties and morphology of poly caprolactone/ poly lactic acod/ crystal nanocellulose nanocomposites [Volume 12, Issue 3, 2021, Pages 363-374]
-
Nano copper
Study on Leaching of Copper Nanoparticles in Combined Impregnation- Densification Treatments of wood after Accelerated Aging [Volume 6, Issue 1, 2015, Pages 159-165]
-
Nano copper
Investigation of Soluble copper nanoparticles effects in Construction Five-layer boards [Volume 14, Issue 4, 2023, Pages 351-362]
-
Nano-Copper
Study on the Effect of Heat Treatment on Physical Properties of Poplar and Beech Woods Impregnated with Nano-Copper and Nano-Silver [Volume 3, Issue 1, 2013, Pages 109-117]
-
Nano crystalline cellulose
Evaluation of structural, physical and chemical properties of cellulose and nanocrystalline cellulose extracted from pruning palm trees wastes [Volume 12, Issue 1, 2021, Pages 95-107]
-
Nano crystalline cellulose
Evaluation of antibacterial performance of iron oxide nanoparticles stabilized by biodegradable lignocellulosic materials [Volume 12, Issue 3, 2021, Pages 337-350]
-
Nanocrystalline cellulose
Investigation of physical, mechanical properties and formaldehyde emission of medium density fiberboard manufactured from urea formaldehyde resin reinforced with nanocrystalline cellulose [Volume 8, Issue 2, 2017, Pages 197-209]
-
Nanocrystalline cellulose
Structural properties and thermal stability of nano crystalline cellulose produced from waste paper [Volume 13, Issue 1, 2022, Pages 37-47]
-
Nanocrystals
Cellulose nanocrystal properties and their applications [Volume 6, Issue 1, 2015, Pages 167-192]
-
Nano-fiber cellulose
Using cellulose nanofiber as filler of urea formaldehyde resin in plywood manufacture [Volume 6, Issue 2, 2015, Pages 227-237]
-
Nano Fibrillated Cellulose
Performance of Nano Fibrillated Cellulose (NFC) and Chitosan Bio-polymeric System on Recycled Pulp and Paper Properties of Old Corrugated Containers (OCC) [Volume 7, Issue 2, 2016, Pages 297-309]
-
Nanofibrillated Cellulose (NFC)
Improvement of wet and dry layer strengths of paper from chemi-mechanical pulp using polyamide epichlorohydrin and cellulose nanofibers vs imported long fiber Kraft pulp [Volume 11, Issue 4, 2020, Pages 627-643]
-
Nanographene
The effect of nano graphene particles on the Physical and mechanical of high density polyethylene-rapeseed stalk flour composites [Volume 10, Issue 4, 2019, Pages 629-641]
-
Nanographene
Investigation of the mechanical-dynamic and thermal properties of nanocomposites manufactured from rapeseed stalk flour/ nanographene and high-density polyethylene [Volume 13, Issue 4, 2022, Pages 445-456]
-
Nano Hydroxyapatite
Effect Of Paper Deacidification With Nano Calcium Hydroxide and Nano Hydroxyapatite, With Nano Cellulose And Nano Chitosan On Its Anti-Fungal Properties [Volume 9, Issue 1, 2018, Pages 53-63]
-
Nano-lignocellulose
Evaluation of the starch films containing cellulose and lignocellulose for food packaging [Volume 10, Issue 1, 2019, Pages 35-47]
-
Nano-polyurethane
The Effect of spray coating and freezing of brown liner paper on its physical and mechanical properties [Volume 14, Issue 1, 2023, Pages 31-40]
-
Nano silica
Construction of lightweight and resistant concrete with silica and wooden particles [Volume 8, Issue 4, 2017, Pages 585-603]
-
Nanosilica
Effect of chitosan-nanosilica self-assembly layers chitosan- on
cotton linter fibers and the paper properties [Volume 5, Issue 2, 2014, Pages 81-92]
-
Nanosilica
Effect of Chitosan Electrostatic Charge on the Performance of Chitosan-Nanosilica in Recycled Old Corrugated Container Pulp [Volume 9, Issue 3, 2018, Pages 459-469]
-
Nanosilica
Investigation on the Possibility of Physical and Mechanical Properties Modification of Wood-Plastic Nanocomposites By Microwave Radiation [Volume 13, Issue 3, 2022, Pages 261-273]
-
Nano silver
Study on the Effect of Combined Nanosilver- Hygrothermal
Treatments on Wood Properties [Volume 5, Issue 1, 2014, Pages 93-106]
-
Nano-Silver
Study on the Effect of Heat Treatment on Physical Properties of Poplar and Beech Woods Impregnated with Nano-Copper and Nano-Silver [Volume 3, Issue 1, 2013, Pages 109-117]
-
Nano SiO2
Long-term water absorption and thickness swelling and determine their characteristics in wood flour/polypropylene/Nano SiO2 nanocomposite [Volume 7, Issue 2, 2016, Pages 241-254]
-
Nano-SiO2 particles
The effect of nano-SiO2 particles and film thickness on physical properties of transparent wood coatings [Volume 12, Issue 1, 2021, Pages 1-15]
-
Nano Titanium dioxide
Investigation on the mechanical and optical properties of kraft paper coated with a combination of pectin, polyvinyl alcohol and nano titanium dioxide [Volume 13, Issue 1, 2022, Pages 15-25]
-
Nano-Titanium Dioxide
Application of nano-titanium dioxide in the manufacture of Photocatalyst Securities Paper by controlled hydrolysis method [Volume 10, Issue 1, 2019, Pages 21-34]
-
Nanowelding
Effect of dissolution time and recycled solvent on the nanowelding process of cellulose nanofiber [Volume 11, Issue 3, 2020, Pages 395-405]
-
Nano wollastonite
The evalaution of decay resistance and dimentional stability of poplar wood treated with Styrene/Nano wellastonite [Volume 10, Issue 3, 2019, Pages 445-455]
-
Nano-wollastonite
Study on the potential use of nano-wollastonite to improve the fire resistance and dimensional stability of poplar wood (Populus nigra) [Volume 4, Issue 2, 2013, Pages 1-10]
-
Nano-wollastonite
Penetrability of nano-wollastonite into the poplar wood and its effect on wood durability and dimensional stability [Volume 8, Issue 2, 2017, Pages 267-282]
-
Nano-wollastonite
Investigation of the effect of nano-wollastonite on moisture resistance in sealer-killer and sealer-semi-polyester paints on Fagus orientalis, Abies and Populus spp Salicacea species [Volume 12, Issue 2, 2021, Pages 175-184]
-
Nano Wood
Influence of Cationic Starch and Nano-Wood addition on improving the Old Corrugated Containers (OCC) pulp properties [Volume 12, Issue 4, 2021, Pages 481-493]
-
Nano-zeolite
Hydrogel composite based on thermal modified carboxymethyl cellulose and nanozeolite [Volume 13, Issue 4, 2022, Pages 433-443]
-
Nano zinc dioxide
Improving Weathering Performance of Beech Wood Coated with Acrylic Paint by nano zinc oxide and nano cellulose [Volume 10, Issue 2, 2019, Pages 311-321]
-
Nano-Zinc Oxide
Effect of Nano-Zinc Oxide on the Physical and Mechanical properties of
Paulownia Wood (Paulownia fortunei) [Volume 4, Issue 1, 2013, Pages 77-85]
-
Nano-zycofil Acid catalyzed lacquers
The Effect of Clear Paints, Nanozycofil and Nanozycosil on Water Absorption and Contact Angle of Poplar Wood [Volume 2, Issue 1, 2011, Pages 17-26]
-
Nanozycosil
The Potential Use of Nanozycosil and Sodium Montmorillonite (NaMMT) Nanoclay to Decrease Water Absorption in MDF [Volume 1, Issue 2, 2011, Pages 69-81]
-
Nanozycosil
The Effect of Clear Paints, Nanozycofil and Nanozycosil on Water Absorption and Contact Angle of Poplar Wood [Volume 2, Issue 1, 2011, Pages 17-26]
-
Natural adhesive
Investigation on the influence of pressing conditions on the properties of particleboard made from natural mimosa condensed tannins adhesive [Volume 6, Issue 2, 2015, Pages 193-201]
-
Natural adhesive
Application of acetylated nanocrystalline cellulose in modified soy-based adhesive for plywood [Volume 8, Issue 1, 2017, Pages 79-94]
-
Natural fibers
Optimization of production variables of natural fibers- cement composites by response surface methodology (RSM) [Volume 11, Issue 1, 2020, Pages 97-108]
-
Natural texture
A New Method for Defect Detection on Images Captured from Wood Veneer: Optimization of Energy Function on Natural Texture Eliminated Image [Volume 6, Issue 2, 2015, Pages 299-309]
-
Natural weathering
Effect of vegetable oils coatings containing UV absorbents on weathering resistance of
Effect of vegetable oils coatings containing UV absorbents on weathering resistance of heat treated wood [Volume 11, Issue 3, 2020, Pages 485-496]
-
Natural weathering
Study on physical properties and weathering resistance of wood modified by formaldehyde-based resins containing nano zinc oxide [Volume 11, Issue 4, 2020, Pages 599-610]
-
NDS
Withdrawal resistance and lateral shear strength of the nail connector in cypress wood (Cupressus arizonica ) treated with ACC and ACQ with emphasis on the use in NLT [Volume 14, Issue 2, 2023, Pages 113-125]
-
NDT stress wave
Evaluation of Modulus of Elasticity in Standing Trees and Sawn Wood in Populous deltoids using Nondestructive Stress Wave Testing [Volume 5, Issue 1, 2014, Pages 11-20]
-
Neutral Semi Sulfite Pulp
Evaluation of OCC Recycled Pulps Admixture with Local Hardwood NSSCPulp at Mazandaran Wood and Paper Industries [Volume 2, Issue 2, 2011, Pages 147-160]
-
Newsprint
Reviewing effect utilization of birch species in optical and mechanical pulp & CMP properties from MWPI. [Volume 6, Issue 2, 2015, Pages 275-284]
-
Nitric acid
Investigation on the physical properties and internal bonding of HDF made of oxidized fiber [Volume 9, Issue 1, 2018, Pages 127-135]
-
Nitrocellulose
Synthesizing and Producing of Low Sensitive Nitrocellulose with Acetylation Method [Volume 10, Issue 2, 2019, Pages 175-187]
-
Nitrocellulose lacquers
Investigation on the Scratch Strength of Clear Paints Used in Furniture Industries on the Wood Species Beech, Elm, Alder and Spruce [Volume 5, Issue 1, 2014, Pages 33-44]
-
Nitrogen
Anatomical Variations in Tension Wood of Populus alba under alternate bending, nitrogen fertilization and gibberellin treatments [Volume 11, Issue 1, 2020, Pages 147-160]
-
Nitrogen Content
Synthesizing and Producing of Low Sensitive Nitrocellulose with Acetylation Method [Volume 10, Issue 2, 2019, Pages 175-187]
-
Nondestructive test
Nondestructive evaluation of acoustical and mechanical properties of bagasse fiber composites by flexural vibration method (Lohe Sabz & Karoon factories) [Volume 6, Issue 2, 2015, Pages 217-226]
-
Non-destructive testing
Application of GPR technique in evaluation of internal defects in hardwood species [Volume 8, Issue 2, 2017, Pages 225-240]
-
Non-wooden lignocellulosic resources
Improving the mechanical and physical properties of particleboard produced from bamboo- industrial wood using polypropylene powder [Volume 9, Issue 2, 2018, Pages 199-208]
-
North Khorasan
Effective Indices in Site Selection of Furniture Industry from Point of View of Suppliers in North Khorasan Province: Application of AHP Method [Volume 2, Issue 2, 2011, Pages 135-145]
-
Norway spruce (Picea abies)
Effect of intraspecific competition on radial growth and tracheid biometry: A Study of dominant and suppressed trees in a Norway spruce plantation [Volume 14, Issue 2, 2023, Pages 169-181]
-
NSSC
Influence of Recycling on Chemical Properties and Hornification of CMP and [Volume 3, Issue 1, 2013, Pages 99-108]
-
NSSC pulp
Modification of NSSC pulp broke fibers using layering method and investigating its effect on paper properties [Volume 7, Issue 3, 2016, Pages 413-423]
-
NSSC pulp
The product of pulp from hornbeam with alkaline sulfite- AQ process [Volume 10, Issue 4, 2019, Pages 479-494]
O
-
OCC pulp
Evaluation of the Effect of Endoglucanase Refining on the Physical and Mechanical Properties of Paper Made from OCC Pulp [Volume 4, Issue 2, 2013, Pages 111-122]
-
OCC pulp
Investigation of the Effect of Endoglucanase Treatment on Beatability
and Drainage Rate of OCC Pulps [Volume 5, Issue 1, 2014, Pages 129-138]
-
OCC pulp
Determination of The Optimum Use of Cationic Starch on the Basis of the Mechanical Strengths of Mixed OCC and Virgin NSSC pulps [Volume 2, Issue 2, 2011, Pages 121-133]
-
OCC pulp
Effect of cationic polyDADMAC-based fixing agent on strength properties of OCC pulp [Volume 10, Issue 4, 2019, Pages 605-616]
-
OCC pulp
Investigating the effect of refining on cellulase enzyme activity on the properties of OCC pulp [Volume 11, Issue 4, 2020, Pages 543-552]
-
OCC pulp
The effect of enzymatic pre-treatment with amylase and refining on the physical and dewatering properties of OCC pulp [Volume 12, Issue 4, 2021, Pages 507-519]
-
Office waste paper
The effect of different additives on the properties of handsheet prepared from office waste paper [Volume 13, Issue 2, 2022, Pages 119-131]
-
Offshore Outsourcing
Studying and Assessment of the Effective Criteria on Opportunities Attainment from Offshore Outsourcing in Iran Wood Furniture Industry [Volume 6, Issue 2, 2015, Pages 203-216]
-
Ohmic heating
Investigation the Quality of Recycled Medium Density Fiber boards (MDF) via Two Different Method i.e. Hydrothermal and Ohmic heating [Volume 8, Issue 2, 2017, Pages 323-333]
-
Oil heat modification
Effect of different oil heat treatment conditions on chemical structure and physical properties of wingnut (Pterocarya fraxinifolia) wood [Volume 11, Issue 2, 2020, Pages 199-209]
-
Old Corrugated Carton
Influence of Cationic Starch and Nano-Wood addition on improving the Old Corrugated Containers (OCC) pulp properties [Volume 12, Issue 4, 2021, Pages 481-493]
-
Old Corrugated Container (OCC)
Effect of Lactase Enzyme on Delignification and Physical
Properties of OCC Pulp [Volume 3, Issue 2, 2013, Pages 157-170]
-
Old corrugated container pulp fibers
Effect of Self-assembly Layering Factors of Cationic Starch on Pulp Zeta Potential [Volume 13, Issue 1, 2022, Pages 83-96]
-
Old Newsprint
The Effect of Different Concentrations of Cellulase Enzyme on
Optical and Physical Properties of ONP Deinked Pulp [Volume 2, Issue 1, 2011, Pages 1-15]
-
OLS approach
Investigation the factors influencing on demand for lumber imports in Iran [Volume 4, Issue 1, 2013, Pages 101-116]
-
Optical and Mechanical properties
Effect of Dispersion and Bleaching on the Mechanical and Optical Properties of Deinked Recycled Pulp [Volume 7, Issue 1, 2016, Pages 33-41]
-
Optical Features
Influence of the Alkalified Tragacanth Gum on optical and Mechanical Strenght of the Historical Paper Documents [Volume 9, Issue 2, 2018, Pages 209-222]
-
Optical Features
Influence of the cellulose nanofibers on optical and mechanical strength of the historical paper relics [Volume 11, Issue 4, 2020, Pages 683-692]
-
Optical & Mechanical Properties
Reviewing effect utilization of birch species in optical and mechanical pulp & CMP properties from MWPI. [Volume 6, Issue 2, 2015, Pages 275-284]
-
Optical Properties
The Effect of Different Concentrations of Cellulase Enzyme on
Optical and Physical Properties of ONP Deinked Pulp [Volume 2, Issue 1, 2011, Pages 1-15]
-
Optical Properties
The effect of coatings and coating weight by two types of PCC on barrier and optical properties and roughness of paper [Volume 8, Issue 2, 2017, Pages 283-295]
-
Optical Properties
Investigation on the mechanical and optical properties of kraft paper coated with a combination of pectin, polyvinyl alcohol and nano titanium dioxide [Volume 13, Issue 1, 2022, Pages 15-25]
-
Optimal product and Target market
The model of multiple criteria decision making to determine the optimal product and identify target markets based on poplar, alder and loblolly-pine [Volume 10, Issue 2, 2019, Pages 189-203]
-
Optimization
Identifying and prioritizing indicators and effective solutions to optimization the use of wood in construction classical furniture by using AHP (Case study of Qom) [Volume 7, Issue 4, 2016, Pages 573-589]
-
Organosolv
Evaluation of Pulp and Paper Properties obtained from Maple Juvenile Wood through Organosolv Alcohol Method Catalyzed by Calcium and Magnesium Salts [Volume 6, Issue 1, 2015, Pages 31-40]
-
Oriented strand board
Investigation on fracture toughness and internal bonding of oriented strand board (OSB) made from Poplar [Volume 9, Issue 4, 2018, Pages 549-559]
-
Oriented strand lumber
Determination of withdrawal resistance of staple joints constructed with various members of upholstered furniture [Volume 8, Issue 1, 2017, Pages 95-108]
-
Oxidation
Vanillin Production from kraft Liquor of Pinus eldarica [Volume 4, Issue 1, 2013, Pages 143-150]
-
Oxidized fiber
Investigation on the physical properties and internal bonding of HDF made of oxidized fiber [Volume 9, Issue 1, 2018, Pages 127-135]
-
Oxidized Polypropylene
The effect of nanoclay particles and compatibilization of oxidized polypropylene in molten phase on the mechanical and physical properties of wood-plastic composite [Volume 9, Issue 1, 2018, Pages 137-151]
-
Oxidized Starch
Influence of using native starch through modification with α-amylase enzyme for surface paper sizing as an alternative to oxidized starch [Volume 11, Issue 3, 2020, Pages 433-443]
-
Oxygen delignification
Production of dissolving pulp from populus deltoides wood utilizing alkaline pre-extraction followed by soda-AQ pulping process [Volume 9, Issue 2, 2018, Pages 289-298]
-
Oxygen injection
Recovery of lignin from Kraft black liquor in the methods oxygen and carbon dioxide pretreatment from hardwood Kraft black liquor [Volume 12, Issue 2, 2021, Pages 235-246]
-
Ozone
Comparison of the effect of ozonation on the lignin removal of sugarcane bagasse and its unbleached paper pulp. [Volume 14, Issue 3, 2023, Pages 313-325]
P
-
Packaging
Production of zein, chitosan, nanocellulose Nanocomposite , dynamic analysis and glass transition temperature [Volume 8, Issue 3, 2017, Pages 471-481]
-
Packaging
Evaluation and comparision of mechanical and barrier properties of stone paper and gloss paper [Volume 10, Issue 3, 2019, Pages 373-384]
-
Packaging
Investigation of resistance and optical properties of the papers treated with cellulose nanocrystals and zinc oxide nanoparticles [Volume 10, Issue 3, 2019, Pages 407-415]
-
Packaging
Utilization of the various recycled fibers composition in producing packaging paper [Volume 14, Issue 1, 2023, Pages 65-78]
-
Packaging
Investigating the resistance and optical properties of papers coated with carboxymethyl cellulose and montmorillonite combination [Volume 14, Issue 2, 2023, Pages 215-226]
-
Packaging cardboard
The effect of corn zein coating on the strength and barrier properties of liner paper [Volume 13, Issue 2, 2022, Pages 213-223]
-
Packaging paper
Investigation on the mechanical and optical properties of kraft paper coated with a combination of pectin, polyvinyl alcohol and nano titanium dioxide [Volume 13, Issue 1, 2022, Pages 15-25]
-
Packaging Papers
Identification of Quantitative and Qualitative Papermaking Parameters of OCC Pulp Fibers [Volume 6, Issue 2, 2015, Pages 265-274]
-
PAE
Improving wet tensile strength of paper glass using PAE, CNF and CMC [Volume 9, Issue 2, 2018, Pages 163-173]
-
Pak Choob Industrial Group
Investigating the effect of brand gender on brand loyalty with emphasis on the mediating role of brand love and perceived brand quality in Pak Choub Industrial Group [Volume 13, Issue 4, 2022, Pages 473-486]
-
Palms and Musa Trees
Determination and Prioritiz ation of Effective Criteria in Construction of Particleboard Factories with Using Wastes of Tamarisk, Palms and Musa Trees
Case Study: Sistan and Baluchestan province [Volume 6, Issue 1, 2015, Pages 13-29]
-
Paper
Effect of calendering on physical and mechanical properties of coated papers [Volume 10, Issue 2, 2019, Pages 273-285]
-
Paper
Analysis of Import Demand Function of Iranian Paper and Paperboard Using Bond Test [Volume 11, Issue 3, 2020, Pages 457-469]
-
Paper
Investigation the effect of Thiophanate-methyl on the ageing of Gall ink of the historical papers
[Volume 12, Issue 2, 2021, Pages 195-205]
-
Paperboard
A novel paper packaging coated with polyethylene wax based dispersion barrier coating for food packaging applications [Volume 11, Issue 1, 2020, Pages 85-95]
-
Paper Coating
Improvement of Physical and Mechanical Properties of Testliner Coated by Unmodified and Modified Lignins [Volume 14, Issue 1, 2023, Pages 1-15]
-
Paper deacidification treatment
Effect Of Paper Deacidification With Nano Calcium Hydroxide and Nano Hydroxyapatite, With Nano Cellulose And Nano Chitosan On Its Anti-Fungal Properties [Volume 9, Issue 1, 2018, Pages 53-63]
-
Paper Deasidification
EFFECT OF DRY- HEAT AND MOIST-HEAT AGING ON PROPERTIES OF PAPERS TREATED WITH NANO CALCIUM HYDROXIDE AND NANO CHITOSAN [Volume 9, Issue 2, 2018, Pages 277-288]
-
Paper industries
Determination and ranking cleaner production criteria by using analytic hierarchy process (Case study: Latif paper products company) [Volume 8, Issue 4, 2017, Pages 573-584]
-
Paper industries
Determination effective criteria in optimizing energy consumption in Kaveh paper industry company using analytic Hierarchy process [Volume 12, Issue 3, 2021, Pages 391-403]
-
Papermaking
Application of cellulosic nanofibers to replace with imported long- fiber pulps in paper made from bagasse [Volume 7, Issue 4, 2016, Pages 523-536]
-
Paper Making
Improving wet tensile strength of paper glass using PAE, CNF and CMC [Volume 9, Issue 2, 2018, Pages 163-173]
-
Papermaking additives
A Comparison on the performance of cationic starch in external and internal applications for recycled linerboard [Volume 13, Issue 3, 2022, Pages 301-311]
-
Paper properties
Modification of NSSC pulp broke fibers using layering method and investigating its effect on paper properties [Volume 7, Issue 3, 2016, Pages 413-423]
-
Paper properties
Effect of alum-dispersed rosin system on water absorption, strength and optical properties of papers made from recycled fibers [Volume 10, Issue 3, 2019, Pages 385-395]
-
Paper Pulp
The Survey of Chemical Paper Pulp Properties Produced from Rice Straw Based on Formaldehyde Sulfide Method. [Volume 3, Issue 2, 2013, Pages 13-23]
-
Paper quality
Investigation on the bleachability of hemicellulase-deinked pulp versus chemical deinking process [Volume 13, Issue 3, 2022, Pages 289-300]
-
Paper recycling
Investigation of Electro coagulation Process on TSS and COD Removal from Effluent of the Paper Recycling Mill Using Al Electrodes [Volume 3, Issue 2, 2013, Pages 53-64]
-
Paper Wet Strength
Improving wet tensile strength of paper glass using PAE, CNF and CMC [Volume 9, Issue 2, 2018, Pages 163-173]
-
Paraffin
Investigation on the physical properties of poplar wood (Populus deltoids) modified with glutaraldehyde/paraffin [Volume 8, Issue 4, 2017, Pages 617-630]
-
Paraffin emulsion
Dimensional Stability of Poplar Wood by Paraffin Emulsion, Quaternary Ammonium and Hydrated Starch using Full-cell Treatment [Volume 1, Issue 1, 2011, Pages 79-88]
-
Particleboard
Effect of Graphite powder on thermal conductivity, physical and mechanical properties of 3-layer particleboard [Volume 4, Issue 2, 2013, Pages 123-130]
-
Particleboard
Investigation the Effect of Increasing Board Density and Amount of UF Resin on Particleboard Properties [Volume 2, Issue 1, 2011, Pages 103-112]
-
Particleboard
Study on Flexural Creep Parameters of Overlayed Particleboard by Natural and Melaminated Veneers [Volume 3, Issue 1, 2013, Pages 119-128]
-
Particleboard
Investigation on the influence of pressing conditions on the properties of particleboard made from natural mimosa condensed tannins adhesive [Volume 6, Issue 2, 2015, Pages 193-201]
-
Particleboard
Investigation on the effect of mixed rapeseed stalk residues with wood particles, and mixing of melamine and urea formaldehyde resin on properties of manufactured particleboard [Volume 7, Issue 2, 2016, Pages 167-178]
-
Particleboard
Study on long term creep of two different types of compressed wood sheets used in library shelves [Volume 7, Issue 3, 2016, Pages 437-447]
-
Particleboard
The effect of using waste newspaper in surface layers on physical and mechanical properties of three-layer particleboard [Volume 7, Issue 4, 2016, Pages 537-547]
-
Particleboard
The Effect of Nanoclay on Physical and Mechanical Properties of Particleboard Made from Urea-Kraft Lignin- Glyoxal Green Wood Adhesive [Volume 8, Issue 1, 2017, Pages 119-129]
-
Particleboard
Use of Soy Flour-Tannin Adhesive for Particleboard (Dry Condition) [Volume 8, Issue 1, 2017, Pages 131-143]
-
Particleboard
Investigation on bending moment capacity of corner joints constructed with spline under diagonal tension and compression [Volume 8, Issue 4, 2017, Pages 521-532]
-
Particleboard
The effect of alkali treatment of bamboo on the physical and mechanical properties of particleboard made from bamboo - industrial wood particles [Volume 8, Issue 4, 2017, Pages 605-615]
-
Particleboard
The effect of alkali treatment of wheat straw powder on particle board properties made from mixing wheat straw and industrial wood chips [Volume 12, Issue 1, 2021, Pages 57-71]
-
Particleboard
An artificial neural network model for predicting modulus of elasticity and modulus of rupture of particleboard comparison with a multiple linear regression model [Volume 12, Issue 2, 2021, Pages 283-297]
-
Particleboard
The possibility of using zeolite as a retarder of particleboard obtained from sugarcane pulp [Volume 12, Issue 3, 2021, Pages 309-321]
-
Particleboard
Evaluation of resistance of wooden biscuit joints in mediumdensity fiberboard and particleboard under tensile and shear loads in T and L-type members [Volume 13, Issue 2, 2022, Pages 187-200]
-
Particleboard
Investigation of shear strength of joints made of medium-density fiberboard and particleboard with screw connectors [Volume 14, Issue 4, 2023, Pages 329-338]
-
Particleboard Industry
Determination and Prioritiz ation of Effective Criteria in Construction of Particleboard Factories with Using Wastes of Tamarisk, Palms and Musa Trees
Case Study: Sistan and Baluchestan province [Volume 6, Issue 1, 2015, Pages 13-29]
-
Particle Size
The influence of treatment and shelling ratio on the mechanical properties of particleboard manufactured from Canola (Brassica napus) stalk particles [Volume 7, Issue 2, 2016, Pages 255-270]
-
Particle Size
The Effect of wheat straw particle size on the mechanical and water absorption properties of wheat straw/low density polyethylene biocomposites for packaging applications [Volume 8, Issue 2, 2017, Pages 253-265]
-
Particle Size
Cationic precipitated calcium carbonate (PCC) synthesis using simultaneous modification [Volume 11, Issue 1, 2020, Pages 33-43]
-
Paulownia
Methods of retention increasing urea formaldehyde resin in order to produce wood-polymer from Paulownia [Volume 5, Issue 1, 2014, Pages 107-117]
-
Paulownia
Investigation the Plywood Manufacturing of Paulownia (paulownia tomentosa) with Urea and Phenol Formaldehyde Adhesives [Volume 2, Issue 1, 2011, Pages 81-89]
-
Paulownia
The effect of chemical treatment and compression percent on mechanical properties of Paulownia compressed wood [Volume 5, Issue 2, 2014, Pages 59-70]
-
Paulownia
Influence of Cationic Starch and Nano-Wood addition on improving the Old Corrugated Containers (OCC) pulp properties [Volume 12, Issue 4, 2021, Pages 481-493]
-
Paulownia
Effect of brown rot fungus on the functional characteristics of heat treated wood [Volume 13, Issue 2, 2022, Pages 161-170]
-
Paulownia fortunei
The Effect of Chemical Modification with Phenol Formaldehyde and Compression on Mechanical Properties of Paulownia (P.fortunie) Wood [Volume 3, Issue 1, 2013, Pages 13-27]
-
Paulownia fortunei
Effect of Nano-Zinc Oxide on the Physical and Mechanical properties of
Paulownia Wood (Paulownia fortunei) [Volume 4, Issue 1, 2013, Pages 77-85]
-
PB
Nondestructive evaluation of acoustical and mechanical properties of bagasse fiber composites by flexural vibration method (Lohe Sabz & Karoon factories) [Volume 6, Issue 2, 2015, Pages 217-226]
-
PCC
The effect of coatings and coating weight by two types of PCC on barrier and optical properties and roughness of paper [Volume 8, Issue 2, 2017, Pages 283-295]
-
Pectin
Investigation on the mechanical and optical properties of kraft paper coated with a combination of pectin, polyvinyl alcohol and nano titanium dioxide [Volume 13, Issue 1, 2022, Pages 15-25]
-
Perceived Quality
Investigating the effect of brand gender on brand loyalty with emphasis on the mediating role of brand love and perceived brand quality in Pak Choub Industrial Group [Volume 13, Issue 4, 2022, Pages 473-486]
-
Percentage of thickness swelling
Comparison of predicted thickness swelling of particleboard with fuzzy systems and artificial neural networks [Volume 6, Issue 1, 2015, Pages 53-66]
-
Performance properties
The investigation of surface properties of Populus nigra wood coated with silica nanoparticles [Volume 12, Issue 1, 2021, Pages 133-143]
-
Permeability
Measuring the Drying Kinetics and Mass Transfer Coefficients of Hornbeam Wood (Carpinus betulus) from Nooshahar Region [Volume 2, Issue 1, 2011, Pages 39-51]
-
Permeability coefficient
Effect of Drying Method on the Permeability Coefficient of
Oak Wood (Quercus infactoria) [Volume 5, Issue 1, 2014, Pages 1-9]
-
Perpendicular
Determination of Screw and Nail Withdrawal Strengths in Parallel and Perpendicular to Grain of some Hardwoods of Iran [Volume 3, Issue 2, 2013, Pages 171-180]
-
Pesticide
Investigation of ِDecay Resistance of Poplar Plywood with Encapsulated Pesticides [Volume 13, Issue 2, 2022, Pages 201-212]
-
PET yarn
Cellulose coating on Poly (Ethylene Terephthalate) yarn [Volume 11, Issue 4, 2020, Pages 533-541]
-
Phenolics
Study of Chemical Components and Bioactive Properties of Knot wood Extractives from Four Endemic Species of Hyrcanian Forests [Volume 8, Issue 1, 2017, Pages 53-66]
-
Phragmites Australis
The effect of nanoclay particles and compatibilization of oxidized polypropylene in molten phase on the mechanical and physical properties of wood-plastic composite [Volume 9, Issue 1, 2018, Pages 137-151]
-
Physical
The Effect of spray coating and freezing of brown liner paper on its physical and mechanical properties [Volume 14, Issue 1, 2023, Pages 31-40]
-
Physical and mechanical
properties
Study on the Possibility of Recycled-Banknote Utilization in the Production of
Wood Gypsum Composite-boards [Volume 4, Issue 1, 2013, Pages 87-99]
-
Physical and mechanical properties
Effect of Graphite powder on thermal conductivity, physical and mechanical properties of 3-layer particleboard [Volume 4, Issue 2, 2013, Pages 123-130]
-
Physical and mechanical properties
Investigation of the type and content of gypsum on the dimensional stability and mechanical properties of gypsum particleboard [Volume 5, Issue 1, 2014, Pages 45-54]
-
Physical and mechanical properties
Investigation the Effect of Increasing Board Density and Amount of UF Resin on Particleboard Properties [Volume 2, Issue 1, 2011, Pages 103-112]
-
Physical and mechanical properties
Dissolution and regeneration of lignocellulosic materials with ionic liquids
BMIMCl and ([BMIM] [MeSO4]) and determination some of mechanical and
physical properties [Volume 4, Issue 1, 2013, Pages 117-130]
-
Physical and mechanical properties
The effect of using the textile waste fibers and nanoclay particles on physical and mechanical properties of composite made from wood flour/polypropylene [Volume 6, Issue 1, 2015, Pages 1-12]
-
Physical and mechanical properties
The effect of Nano clay and coupling agent on the physical and mechanical properties of polypropylene waste paper composites [Volume 7, Issue 2, 2016, Pages 193-206]
-
Physical and mechanical properties
Influence of Furfurylation on Practical Properties of Beech Plywood [Volume 7, Issue 2, 2016, Pages 219-230]
-
Physical and mechanical properties
The effect of layer’s moisture content and pre-heating by microwave radiation on physical and mechanical properties of laminated veneer lumber [Volume 8, Issue 1, 2017, Pages 39-51]
-
Physical and mechanical properties
Effect of Bene gum on the physical and mechanical properties of oil-heat treated wood [Volume 8, Issue 3, 2017, Pages 361-373]
-
Physical and mechanical properties
The effect of alkali treatment of bamboo on the physical and mechanical properties of particleboard made from bamboo - industrial wood particles [Volume 8, Issue 4, 2017, Pages 605-615]
-
Physical and mechanical properties
Investigation of physical and mechanical performance of wood-based composites after laboratory accelerated aging [Volume 9, Issue 1, 2018, Pages 103-117]
-
Physical and mechanical properties
Effect of the addition of citric acid on particleboard properties [Volume 10, Issue 1, 2019, Pages 89-99]
-
Physical and mechanical properties
The effect of hygro-thermo-mechanical modification on the applied properties of glulam made from poplar [Volume 11, Issue 2, 2020, Pages 241-253]
-
Physical and mechanical properties
Influence of using native starch through modification with α-amylase enzyme for surface paper sizing as an alternative to oxidized starch [Volume 11, Issue 3, 2020, Pages 433-443]
-
Physical and mechanical properties
Study of antibacterial activity and other properties of paper coated by selenium nanoparticles [Volume 12, Issue 1, 2021, Pages 29-44]
-
Physical and mechanical properties
The effect of cationic starch on the mechanical properties of paper Fluting mixing soda bagasse pulp and OCC [Volume 12, Issue 1, 2021, Pages 121-130]
-
Physical and mechanical properties
The Use of Maleated Lignin based Polyacid as Catalyst in Urea-Lignin-Glyoxal Wood Adhesive [Volume 12, Issue 3, 2021, Pages 351-361]
-
Physical and mechanical properties
Production and evaluation of lightweight fiberboard using ethylene vinyl acetate foam [Volume 12, Issue 3, 2021, Pages 405-417]
-
Physical and mechanical properties
Effect of brown rot fungus on the functional characteristics of heat treated wood [Volume 13, Issue 2, 2022, Pages 161-170]
-
Physical and mechanical properties
Investigation on the Possibility of Physical and Mechanical Properties Modification of Wood-Plastic Nanocomposites By Microwave Radiation [Volume 13, Issue 3, 2022, Pages 261-273]
-
Physical and mechanical properties
Improvement of Physical and Mechanical Properties of Testliner Coated by Unmodified and Modified Lignins [Volume 14, Issue 1, 2023, Pages 1-15]
-
Physical and mechanical properties
Technical evaluation of pure and combined glulam beams based on LSL made from date palm rachies [Volume 14, Issue 3, 2023, Pages 253-269]
-
Physical and mechanical tests
The effect of using waste newspaper in surface layers on physical and mechanical properties of three-layer particleboard [Volume 7, Issue 4, 2016, Pages 537-547]
-
Physical-mechanical properties
Investigation of physical, mechanical properties and formaldehyde emission of medium density fiberboard manufactured from urea formaldehyde resin reinforced with nanocrystalline cellulose [Volume 8, Issue 2, 2017, Pages 197-209]
-
Physical mixing
Effect of Lignin Mixing Method on Physical and Mechanical Properties of Wood Flour- Polypropylene Composites [Volume 1, Issue 2, 2011, Pages 103-113]
-
Physico-chemical Properties
The Effect of Nanoclay on Physicochemical, Mechanical and Thermal Properties of New Urea- Glyoxal Resin [Volume 6, Issue 1, 2015, Pages 133-143]
-
Physico-mechanical properties
Comparative investigation of the effect of pretreatment type and densification conditions on physical and mechanical properties of paulownia and poplar woods [Volume 12, Issue 4, 2021, Pages 521-536]
-
Pinus nigra
Determination of sapwood area in Pinus nigra by electrical impedance tomography [Volume 12, Issue 1, 2021, Pages 73-82]
-
Pinus sylvestris
Effect of Surface Densification on Treatability of Scots pine Wood and Micro-Distribution of Impregnating Liquid [Volume 11, Issue 1, 2020, Pages 57-69]
-
Pinus taeda
Comparison of physical and mechanical properties of Pinus taeda wood with common fast-growing species [Volume 13, Issue 3, 2022, Pages 345-359]
-
Planer shaving
Effect of Graphite powder on thermal conductivity, physical and mechanical properties of 3-layer particleboard [Volume 4, Issue 2, 2013, Pages 123-130]
-
Plasma treatment
Surface modification of cellulose nanocrystals using radio-frequency plasma [Volume 13, Issue 1, 2022, Pages 49-60]
-
Plybond
Effect of Applying Cellulose Nanofibers on the Properties of Multiply Paper Made from Recycled Fibers [Volume 9, Issue 3, 2018, Pages 359-369]
-
Plywood
The predicting ultimate of joint withdrawal resistance constructed of plywood with regression models application according to diameter and penetrating depth [Volume 4, Issue 2, 2013, Pages 11-22]
-
Plywood
Investigation the Plywood Manufacturing of Paulownia (paulownia tomentosa) with Urea and Phenol Formaldehyde Adhesives [Volume 2, Issue 1, 2011, Pages 81-89]
-
Plywood
Establishing mathematical model withdrawal resistance of wooden dowel in
plywood [Volume 4, Issue 1, 2013, Pages 37-47]
-
Plywood
Prediction of bending moment resistance of screw connected joints in plywood members using regression models and compare with that commercial medium density fiberboard (MDF) and particleboard [Volume 5, Issue 2, 2014, Pages 27-36]
-
Plywood
Investigation the bending moment resistance of joints fabricated
with dowel in the case-type furniture [Volume 5, Issue 2, 2014, Pages 37-46]
-
Plywood
Using cellulose nanofiber as filler of urea formaldehyde resin in plywood manufacture [Volume 6, Issue 2, 2015, Pages 227-237]
-
Plywood
The Effect of Soy-Flour Mesh Size and its Adhesive Acidity Changes on Shear Strength of Plywood [Volume 7, Issue 3, 2016, Pages 377-386]
-
Plywood
Application of acetylated nanocrystalline cellulose in modified soy-based adhesive for plywood [Volume 8, Issue 1, 2017, Pages 79-94]
-
Plywood
Investigation of the impact resistance of the plywood made with adhesive enhanced with Cellulose Nanofibers [Volume 9, Issue 2, 2018, Pages 263-275]
-
Plywood
The effect of using Alkali sulfit-Anthraquinone (AS-AQ) liquor powder as filler of urea formaldehyde resin on functional properties of plywood [Volume 9, Issue 3, 2018, Pages 337-347]
-
Plywood
Investigation of ِDecay Resistance of Poplar Plywood with Encapsulated Pesticides [Volume 13, Issue 2, 2022, Pages 201-212]
-
PMDI
Effect of Faces Type and Thickness on Mechanical Properties
of Sandwich Panels [Volume 5, Issue 1, 2014, Pages 85-92]
-
Polyacid
The Use of Maleated Lignin based Polyacid as Catalyst in Urea-Lignin-Glyoxal Wood Adhesive [Volume 12, Issue 3, 2021, Pages 351-361]
-
Polyamide epichlorohydrin (PAE)
Improvement of wet and dry layer strengths of paper from chemi-mechanical pulp using polyamide epichlorohydrin and cellulose nanofibers vs imported long fiber Kraft pulp [Volume 11, Issue 4, 2020, Pages 627-643]
-
Polycaprolactone
Investigation of biodegradability behavior, thermal properties and morphology of poly caprolactone/ poly lactic acod/ crystal nanocellulose nanocomposites [Volume 12, Issue 3, 2021, Pages 363-374]
-
Polyester resin
The Investigation of Acoustic Properties of Carbon Fiber-Polyester Composites and Comparing the Results with Poplar, Walnut and Beech Wood Specimens [Volume 1, Issue 2, 2011, Pages 83-101]
-
Poly ethylene
Investigating the bending creep behavior of poplar wood plastic plywood manufactured by thermoplastic films [Volume 13, Issue 4, 2022, Pages 393-403]
-
Polyethylene wax
A novel paper packaging coated with polyethylene wax based dispersion barrier coating for food packaging applications [Volume 11, Issue 1, 2020, Pages 85-95]
-
Polyhydroxybutyrate-co-valerate
Effects of cellulose nano crystal addition on the properties of polyhydroxybutyrate-co-valerate (PHBV) films [Volume 10, Issue 1, 2019, Pages 153-164]
-
Polylactic acid
Investigation of biodegradability behavior, thermal properties and morphology of poly caprolactone/ poly lactic acod/ crystal nanocellulose nanocomposites [Volume 12, Issue 3, 2021, Pages 363-374]
-
Polymerization degree
Use of viscozyme enzyme as an alternative technology for pulp refining and improvement bagasse soda pulp properties [Volume 6, Issue 1, 2015, Pages 95-108]
-
Poly (methyl methacrylate)
Microencapsulation of Zataria multiflora thyme essential oil to improve its antifungal efficiency by controlled release mechanism [Volume 8, Issue 4, 2017, Pages 563-571]
-
Polyol
Preparation of bio-polyols from lignocellulosic waste by liquefaction [Volume 9, Issue 3, 2018, Pages 313-321]
-
Polyonyl alcohol
Investigation on the mechanical and optical properties of kraft paper coated with a combination of pectin, polyvinyl alcohol and nano titanium dioxide [Volume 13, Issue 1, 2022, Pages 15-25]
-
Poly propylene
Investigating the bending creep behavior of poplar wood plastic plywood manufactured by thermoplastic films [Volume 13, Issue 4, 2022, Pages 393-403]
-
Polypropylene
Investigation on the Physical and Mechanical Properties of Composites from Combined Recycled ONP-Glass Fibers with Polypropylene [Volume 3, Issue 1, 2013, Pages 29-42]
-
Polypropylene
Evaluation of elevated temperature influence on mechanical properties of a commercial unrefined bagasse fiber-polypropylene composite [Volume 5, Issue 2, 2014, Pages 119-130]
-
Polypropylene
Improving the mechanical and physical properties of particleboard produced from bamboo- industrial wood using polypropylene powder [Volume 9, Issue 2, 2018, Pages 199-208]
-
Polypropylene
Effects of maleic anhydride and oxidizer on mechanical and contact angle of polypropylene and cellulose nanocrystals composites. [Volume 12, Issue 2, 2021, Pages 299-307]
-
Polypropylene Fiber
Investigation Some of Physical and Mechanical Properties of Polypropylene Fiber/ Wood /Cement Composites [Volume 7, Issue 2, 2016, Pages 207-217]
-
Polyster
The Effect of Clear Paints, Nanozycofil and Nanozycosil on Water Absorption and Contact Angle of Poplar Wood [Volume 2, Issue 1, 2011, Pages 17-26]
-
Polyurethane
Microscopic investigation on the effects of wood surface modification with sol-gel method on the quality of polyurethane and alkyd coatings [Volume 8, Issue 4, 2017, Pages 509-520]
-
Polyurethane
Preparation of bio-polyols from lignocellulosic waste by liquefaction [Volume 9, Issue 3, 2018, Pages 313-321]
-
Polyurethane coating
The effect of Cerium Dioxide Nanoparticles on the Physical Properties of Polyurethane Clear Coating [Volume 8, Issue 4, 2017, Pages 645-656]
-
Polyurethane coating
Effect of species type and sanding sequence on the adhesion strength and the interphase region of Polyurethane coating and veneer [Volume 11, Issue 2, 2020, Pages 317-332]
-
Poly Vinyl Acetate
Utilization of recycled fibers from MDF wastes and waste paper for manufacturing fiberboard and the effect of poly vinyl acetate on its practical properties [Volume 11, Issue 2, 2020, Pages 173-183]
-
Poly (vinyl alcohol)
Study of Biodegradability and Mechanical Properties of Polyvinyl Alcohol (PVA) Reinforced Celloluse Nanofiber (CNF) [Volume 8, Issue 4, 2017, Pages 497-508]
-
Poly vinylchloride
Polyvinyl chloride coating with viscous cellulose [Volume 12, Issue 3, 2021, Pages 323-336]
-
Pomegranate Peel Extract
Improving the Antibacterial Effect of Pomegranate Peel Extract with Nano-chitosan Using Encapsulation Technique in Sanitary Papermaking [Volume 11, Issue 4, 2020, Pages 513-532]
-
Poplar
Dimensional Stability of Poplar Wood by Paraffin Emulsion, Quaternary Ammonium and Hydrated Starch using Full-cell Treatment [Volume 1, Issue 1, 2011, Pages 79-88]
-
Poplar
Preparation of a Kiln Drying Schedule for Poplar (Populus nigra)
Lumber of 5 cm Thickness [Volume 1, Issue 2, 2011, Pages 13-25]
-
Poplar
Investigation the Effect of Increasing Board Density and Amount of UF Resin on Particleboard Properties [Volume 2, Issue 1, 2011, Pages 103-112]
-
Poplar
Investigation on the Effect of Kenaf Core and Stalk Fiber on the Medium Density Fiber Board Properties Made of Poplar Fibers [Volume 2, Issue 2, 2011, Pages 99-110]
-
Poplar
Influence of Heat Treatment Conditions on Strength Properties of Poplar Wood (Populus deltoides) [Volume 2, Issue 2, 2011, Pages 161-170]
-
Poplar
Study on the Effect of Heat Treatment on Physical Properties of Poplar and Beech Woods Impregnated with Nano-Copper and Nano-Silver [Volume 3, Issue 1, 2013, Pages 109-117]
-
Poplar
Analysis of Poplar process value chain in Western Azerbaijan province aims to upgrading [Volume 6, Issue 1, 2015, Pages 41-52]
-
Poplar
Production of dissolving pulp from populus deltoides wood utilizing alkaline pre-extraction followed by soda-AQ pulping process [Volume 9, Issue 2, 2018, Pages 289-298]
-
Poplar
Investigation on fracture toughness and internal bonding of oriented strand board (OSB) made from Poplar [Volume 9, Issue 4, 2018, Pages 549-559]
-
Poplar
The model of multiple criteria decision making to determine the optimal product and identify target markets based on poplar, alder and loblolly-pine [Volume 10, Issue 2, 2019, Pages 189-203]
-
Poplar
Optimization of production variables of natural fibers- cement composites by response surface methodology (RSM) [Volume 11, Issue 1, 2020, Pages 97-108]
-
Poplar
Experimental study on flexural performance of poplar glued-laminated timber constructed by mechanical fastener and comparing them with those made with cold press [Volume 10, Issue 3, 2019, Pages 347-360]
-
Poplar
Anatomical Variations in Tension Wood of Populus alba under alternate bending, nitrogen fertilization and gibberellin treatments [Volume 11, Issue 1, 2020, Pages 147-160]
-
Poplar
Investigation the physical and mechanical properties of treated poplar wood (Populus deltoides) by wild pistachio tree resin [Volume 11, Issue 1, 2020, Pages 161-172]
-
Poplar
Flexural performance of cross-laminated timber made out of poplar reinforced with nail and screw [Volume 11, Issue 1, 2020, Pages 1-18]
-
Poplar area
Quantitative analysis of poplar plantations in four Iranian
Provinces (Case of the study: East Azerbaijan, Zanjan, Ardabil and Kermanshah) [Volume 12, Issue 3, 2021, Pages 375-389]
-
Poplar farming
Strategic planning for wood farming development (Case study: Urmia) [Volume 8, Issue 4, 2017, Pages 533-548]
-
Poplar wood
Study on the potential use of nano-wollastonite to improve the fire resistance and dimensional stability of poplar wood (Populus nigra) [Volume 4, Issue 2, 2013, Pages 1-10]
-
Poplar wood
The Investigation of Acoustic Properties of Carbon Fiber-Polyester Composites and Comparing the Results with Poplar, Walnut and Beech Wood Specimens [Volume 1, Issue 2, 2011, Pages 83-101]
-
Poplar wood
Analysis of Location Quotient index of poplar wood processing value chain in Iran [Volume 7, Issue 1, 2016, Pages 141-154]
-
Poplar wood
The effect of tension wood on roughness of poplar wood and its modification by steaming [Volume 7, Issue 3, 2016, Pages 323-333]
-
Poplar wood
Determination of withdrawal resistance of staple joints constructed with various members of upholstered furniture [Volume 8, Issue 1, 2017, Pages 95-108]
-
Poplar wood
The evalaution of decay resistance and dimentional stability of poplar wood treated with Styrene/Nano wellastonite [Volume 10, Issue 3, 2019, Pages 445-455]
-
Poplar wood
Study on physical properties and weathering resistance of wood modified by formaldehyde-based resins containing nano zinc oxide [Volume 11, Issue 4, 2020, Pages 599-610]
-
Poplar wood
Influence of poplar wood densification on surface characteristics and adhesion strength [Volume 12, Issue 4, 2021, Pages 537-550]
-
Poplar wood
Designing, Manufacturing and mechanical investigating of joint in laminated stringer of spiral stairs from poplar wood [Volume 13, Issue 3, 2022, Pages 375-391]
-
Popsicle
Identifying the wood type and investigating the quality of imported wooden ice cream sticks [Volume 12, Issue 4, 2021, Pages 495-506]
-
Populus nigra
The Effects of Agroforestry Practices on Physical Propertiesin of Poplus Wood in Radial and Longitudinal Axes [Volume 2, Issue 2, 2011, Pages 53-64]
-
Populus nigra
Thermal treatment and its effect on the gas permeability of Populus nigra [Volume 4, Issue 1, 2013, Pages 151-159]
-
Populusnigra
The investigation of surface properties of Populus nigra wood coated with silica nanoparticles [Volume 12, Issue 1, 2021, Pages 133-143]
-
Porous Carbon
Investigation of the properties of modified lignin-derived porous carbon for Lead removal [Volume 14, Issue 3, 2023, Pages 327-338]
-
Precipitated calcium carbonate
Cationic precipitated calcium carbonate (PCC) synthesis using simultaneous modification [Volume 11, Issue 1, 2020, Pages 33-43]
-
Precipitation
Analyze of Oak Chronology Network with Climate in Hyrcanian Forests [Volume 4, Issue 2, 2013, Pages 91-100]
-
Precipitation
Comparing the impact of climate variables on healthy and declined masses of oak (Quercus brantti Lindl) in the “Khorram Abad” city [Volume 7, Issue 4, 2016, Pages 591-600]
-
Pre-extraction
Effect of Diluted Acid Pre-Extraction on Soda Pulping of Bagasse [Volume 5, Issue 1, 2014, Pages 119-128]
-
Prefabricated
Study on the tensile strength of ready-to-assemble and fixed corner joints on
medium density fiberboard [Volume 4, Issue 1, 2013, Pages 49-63]
-
Pre-Heating
The effect of layer’s moisture content and pre-heating by microwave radiation on physical and mechanical properties of laminated veneer lumber [Volume 8, Issue 1, 2017, Pages 39-51]
-
Press closing speed
Effect of press closing speed on stress relaxation and set recovery of densified alder wood [Volume 10, Issue 4, 2019, Pages 469-477]
-
Press pressure
Investigation on the influence of pressing conditions on the properties of particleboard made from natural mimosa condensed tannins adhesive [Volume 6, Issue 2, 2015, Pages 193-201]
-
Press temperature
Investigation on the influence of pressing conditions on the properties of particleboard made from natural mimosa condensed tannins adhesive [Volume 6, Issue 2, 2015, Pages 193-201]
-
Press Time
Minimizing hot-press time in the manufacturing process
of wood plastic composites [Volume 4, Issue 2, 2013, Pages 79-90]
-
Pre-tensioned
Investigation of mechanical properties of glulam beams made with screws or glue and reinforced with steel plates [Volume 14, Issue 1, 2023, Pages 79-96]
-
Pretreatment
Comparison of the effect of ozonation on the lignin removal of sugarcane bagasse and its unbleached paper pulp. [Volume 14, Issue 3, 2023, Pages 313-325]
-
Price Elasticity
Estimating the demand for recycled paper in Iran: based on the ARDL approach [Volume 14, Issue 3, 2023, Pages 285-298]
-
Price index
Determining the price index of three products of fiberboard and paticleboard (wood-bagasse) between 2010-2019 [Volume 14, Issue 3, 2023, Pages 299-311]
-
Printing and Writing
The influence of type of calcium carbonate fillers on the performance AKD and mechanical properties of printing and writing paper [Volume 7, Issue 1, 2016, Pages 69-77]
-
Prioritizing
Studying and Assessment of the Effective Criteria on Opportunities Attainment from Offshore Outsourcing in Iran Wood Furniture Industry [Volume 6, Issue 2, 2015, Pages 203-216]
-
Priority
Determination of Effective Criteria on site selection for
Solar Wood Drying Units in Iran [Volume 4, Issue 2, 2013, Pages 101-110]
-
Priority
Determination of effective criteria on development of RTA Furniture Industry in Iran [Volume 7, Issue 1, 2016, Pages 13-32]
-
Priority rate
Determination of Effective Criteria for Location Selection of Kiln Wood Drying Plants by AHP Technique [Volume 1, Issue 2, 2011, Pages 55-67]
-
Probiotic
The Effect of Protexin Enzyme for Bagasse Storage on Pulp and Paper Properties [Volume 10, Issue 3, 2019, Pages 457-468]
-
Process and Mechanical properties
Effect of Chitosan Electrostatic Charge on the Performance of Chitosan-Nanosilica in Recycled Old Corrugated Container Pulp [Volume 9, Issue 3, 2018, Pages 459-469]
-
Process water
Effect of structural characteristics of process water on paper properties made from recycled fiber [Volume 10, Issue 3, 2019, Pages 337-346]
-
Product design
Investigating the effective factors in making Kitchen cabinets made of wooden panel products [Volume 14, Issue 2, 2023, Pages 183-197]
-
Production process of particleboard
Comparison of predicted thickness swelling of particleboard with fuzzy systems and artificial neural networks [Volume 6, Issue 1, 2015, Pages 53-66]
-
Product marketing
Investigating the effective factors in making Kitchen cabinets made of wooden panel products [Volume 14, Issue 2, 2023, Pages 183-197]
-
Profilometery
Investigation and Evaluation on Influence of Machining (CNC) Conditions on Surface Quality of Paulownia Wood [Volume 2, Issue 2, 2011, Pages 1-13]
-
Properties
Cellulose nanocrystal properties and their applications [Volume 6, Issue 1, 2015, Pages 167-192]
-
Prosopis juliflora
Evalution Prosopis juliflora(Somr) potential in Kraft Pulping [Volume 7, Issue 1, 2016, Pages 43-54]
-
Protexin Enzyme
The Effect of Protexin Enzyme for Bagasse Storage on Pulp and Paper Properties [Volume 10, Issue 3, 2019, Pages 457-468]
-
Pulp and Paper Properties
Evaluation of Pulp and Paper Properties obtained from Maple Juvenile Wood through Organosolv Alcohol Method Catalyzed by Calcium and Magnesium Salts [Volume 6, Issue 1, 2015, Pages 31-40]
-
Pulp and Paper Properties
The Effect of Protexin Enzyme for Bagasse Storage on Pulp and Paper Properties [Volume 10, Issue 3, 2019, Pages 457-468]
-
Pulping
Effects of washing method on the bagasse pulping characteristics by Sulfur Dioxide- Ethanol-Water (SEW) process [Volume 7, Issue 4, 2016, Pages 549-559]
-
Pulp nanocrystals (PNCs)
Production of nanocrystals and nanofibrils from unbleached and bleached soda pulp with ECFlight bleaching sequence and comparison of their morphological and thermal properties [Volume 13, Issue 4, 2022, Pages 457-471]
-
Pulp nanofibrils (PNFs)
Production of nanocrystals and nanofibrils from unbleached and bleached soda pulp with ECFlight bleaching sequence and comparison of their morphological and thermal properties [Volume 13, Issue 4, 2022, Pages 457-471]
-
Pulp refining
Evaluation of the Effect of Endoglucanase Refining on the Physical and Mechanical Properties of Paper Made from OCC Pulp [Volume 4, Issue 2, 2013, Pages 111-122]
-
Pulp refining
The effect of enzymatic pre-treatment with amylase and refining on the physical and dewatering properties of OCC pulp [Volume 12, Issue 4, 2021, Pages 507-519]
-
Punica granatum
Wood anatomy and fiber biometry of pomegranate wood (Punica granutum L.) in a radial and longitudinal direction of tree [Volume 13, Issue 4, 2022, Pages 487-496]
-
Pure Cellulose
Evaluation of structural, physical and chemical properties of cellulose and nanocrystalline cellulose extracted from pruning palm trees wastes [Volume 12, Issue 1, 2021, Pages 95-107]
-
Purification
Cellulose Extraction from Spirulina Wastes (Spirulina platensis) and Isolation of Cellulose Nanofiber from it [Volume 9, Issue 2, 2018, Pages 301-311]
-
PVAc adhesive
Effect of shoulder thickness on bending moment capacity of mortise and loose
tenon joint [Volume 4, Issue 1, 2013, Pages 65-75]
-
PVAc glue
Performance improvement of PVAc glue in wood finger joints by using Isocyanate as a hardener [Volume 9, Issue 4, 2018, Pages 585-596]
-
PVA resin
The Effect of Face and Adhesive Types on Mechanical Properties of
Sandwich Panels Made from Honeycomb Paper [Volume 4, Issue 2, 2013, Pages 141-152]
Q
-
Qom
Identifying and prioritizing indicators and effective solutions to optimization the use of wood in construction classical furniture by using AHP (Case study of Qom) [Volume 7, Issue 4, 2016, Pages 573-589]
-
Quartile income
Preference of consumers in the selection of final woody products in different income quarters in households of Dorud City [Volume 9, Issue 2, 2018, Pages 175-185]
-
Quaternary ammonium
Dimensional Stability of Poplar Wood by Paraffin Emulsion, Quaternary Ammonium and Hydrated Starch using Full-cell Treatment [Volume 1, Issue 1, 2011, Pages 79-88]
-
Quercus brantti
Comparing the impact of climate variables on healthy and declined masses of oak (Quercus brantti Lindl) in the “Khorram Abad” city [Volume 7, Issue 4, 2016, Pages 591-600]
-
Quercus castaneifoilia
Analyze of Oak Chronology Network with Climate in Hyrcanian Forests [Volume 4, Issue 2, 2013, Pages 91-100]
-
Quercus castaneifolia
Evaluation of the internal decay of the Quercus castaneifolia Tree through the non - destructive test procedure of the acoustic tomography [Volume 12, Issue 1, 2021, Pages 163-173]
-
Quercus macranthera
Analyze of Oak Chronology Network with Climate in Hyrcanian Forests [Volume 4, Issue 2, 2013, Pages 91-100]
R
-
Radial and longitudinal axis of tree
The Effects of Agroforestry Practices on Physical Propertiesin of Poplus Wood in Radial and Longitudinal Axes [Volume 2, Issue 2, 2011, Pages 53-64]
-
Ranking
Effective Indices in Site Selection of Furniture Industry from Point of View of Suppliers in North Khorasan Province: Application of AHP Method [Volume 2, Issue 2, 2011, Pages 135-145]
-
Rapeseed flour
Investigation of the mechanical-dynamic and thermal properties of nanocomposites manufactured from rapeseed stalk flour/ nanographene and high-density polyethylene [Volume 13, Issue 4, 2022, Pages 445-456]
-
Rapeseed stalk
Investigation on the effect of mixed rapeseed stalk residues with wood particles, and mixing of melamine and urea formaldehyde resin on properties of manufactured particleboard [Volume 7, Issue 2, 2016, Pages 167-178]
-
Rapeseed stalk flour
The effect of nano graphene particles on the Physical and mechanical of high density polyethylene-rapeseed stalk flour composites [Volume 10, Issue 4, 2019, Pages 629-641]
-
Rasht City
Identifying and analyzing the factors affecting the loyalty of customers in the home furniture industry (case study: Rasht city) [Volume 14, Issue 1, 2023, Pages 17-30]
-
Raw material shortage
Investigation of pulping and paper making potential of weeds [Volume 8, Issue 2, 2017, Pages 241-251]
-
Reactivity
Acidic prehydrolysis role in dissolving pulp production from OCC [Volume 9, Issue 3, 2018, Pages 441-457]
-
Ready to assemble furniture
Determination of effective criteria on development of RTA Furniture Industry in Iran [Volume 7, Issue 1, 2016, Pages 13-32]
-
Recovery
Effects of washing method on the bagasse pulping characteristics by Sulfur Dioxide- Ethanol-Water (SEW) process [Volume 7, Issue 4, 2016, Pages 549-559]
-
Recycled banknote
Study on the Possibility of Recycled-Banknote Utilization in the Production of
Wood Gypsum Composite-boards [Volume 4, Issue 1, 2013, Pages 87-99]
-
Recycled Fibers
Identification of Quantitative and Qualitative Papermaking Parameters of OCC Pulp Fibers [Volume 6, Issue 2, 2015, Pages 265-274]
-
Recycled Fibers
Effect of Applying Cellulose Nanofibers on the Properties of Multiply Paper Made from Recycled Fibers [Volume 9, Issue 3, 2018, Pages 359-369]
-
Recycled Fibers
Effect of Chitosan Electrostatic Charge on the Performance of Chitosan-Nanosilica in Recycled Old Corrugated Container Pulp [Volume 9, Issue 3, 2018, Pages 459-469]
-
Recycled Fibers
Effect of alum-dispersed rosin system on water absorption, strength and optical properties of papers made from recycled fibers [Volume 10, Issue 3, 2019, Pages 385-395]
-
Recycled Fibers
Cellulose nanofibers made from waste printing and writing papers and its effect on the properties of recycled paper [Volume 12, Issue 2, 2021, Pages 185-194]
-
Recycled Fibers
Use of Modified Soy Adhesive for Manufacturing Fiberboard from Wood and OCC Fiber [Volume 12, Issue 2, 2021, Pages 247-257]
-
Recycled newspaper
The effect of using waste newspaper in surface layers on physical and mechanical properties of three-layer particleboard [Volume 7, Issue 4, 2016, Pages 537-547]
-
Recycled OCC Pulp
Evaluation of OCC Recycled Pulps Admixture with Local Hardwood NSSCPulp at Mazandaran Wood and Paper Industries [Volume 2, Issue 2, 2011, Pages 147-160]
-
Recycled old cardboard
Effect of using Almond shell flour and OCC on the properties of the production briquette [Volume 14, Issue 4, 2023, Pages 415-431]
-
Recycled ONP
Investigation on the Physical and Mechanical Properties of Composites from Combined Recycled ONP-Glass Fibers with Polypropylene [Volume 3, Issue 1, 2013, Pages 29-42]
-
Recycled papers
Investigation on the bleachability of hemicellulase-deinked pulp versus chemical deinking process [Volume 13, Issue 3, 2022, Pages 289-300]
-
Recycled polyethylene
The Study of mechanical and morphological properties of recycled polyethylene/saw dust from cutting of MDF composites [Volume 8, Issue 2, 2017, Pages 185-195]
-
Recycled polyethylene
Investigation the effect of recycled polyethylene powder on physical and mechanical properties of three-layer particleboard [Volume 8, Issue 3, 2017, Pages 441-452]
-
Recycled polypropylene
The Infuence of Coupling Agent and the Content of Fibers on Tensile Strength and Physical Properties of Cotton Fiber Stem/Recycled Polypropylene Composites [Volume 3, Issue 2, 2013, Pages 131-140]
-
Recycled Pulp & Paper Properties
Performance of Nano Fibrillated Cellulose (NFC) and Chitosan Bio-polymeric System on Recycled Pulp and Paper Properties of Old Corrugated Containers (OCC) [Volume 7, Issue 2, 2016, Pages 297-309]
-
Recycling
Influence of Recycling on Chemical Properties and Hornification of CMP and [Volume 3, Issue 1, 2013, Pages 99-108]
-
Recycling
Investigation the Quality of Recycled Medium Density Fiber boards (MDF) via Two Different Method i.e. Hydrothermal and Ohmic heating [Volume 8, Issue 2, 2017, Pages 323-333]
-
Recycling
Effect of Recycling Process on Physical and Mechanical Properties of Wood Flour High-density Polyethylene Composites [Volume 8, Issue 3, 2017, Pages 335-347]
-
Recycling
Recycling of waste MDF via digester and production of nanocrystalline cellulose from recycled fibers [Volume 12, Issue 2, 2021, Pages 271-282]
-
Recycling
Utilization of the various recycled fibers composition in producing packaging paper [Volume 14, Issue 1, 2023, Pages 65-78]
-
Recycling of MDF wastes
Utilization of recycled fibers from MDF wastes and waste paper for manufacturing fiberboard and the effect of poly vinyl acetate on its practical properties [Volume 11, Issue 2, 2020, Pages 173-183]
-
Recycling of polypropylene
A Study on Creep Behavior of Wood Flour- Recycled Polypropylene Composite [Volume 3, Issue 2, 2013, Pages 1-12]
-
Refining
Evaluation of OCC Recycled Pulps Admixture with Local Hardwood NSSCPulp at Mazandaran Wood and Paper Industries [Volume 2, Issue 2, 2011, Pages 147-160]
-
Refining
The Beatability of Wheat Straw Soda and Monoethanolamine Pulps [Volume 7, Issue 2, 2016, Pages 155-166]
-
Refining
Investigating the effect of refining on cellulase enzyme activity on the properties of OCC pulp [Volume 11, Issue 4, 2020, Pages 543-552]
-
Regression model
The predicting ultimate of joint withdrawal resistance constructed of plywood with regression models application according to diameter and penetrating depth [Volume 4, Issue 2, 2013, Pages 11-22]
-
Regression model
Investigation of the relations between screw diameter and pilot hole diameter with withdrawal resistance in LVL for establishing regression model [Volume 8, Issue 4, 2017, Pages 549-561]
-
Renewable resources
Effect of using Almond shell flour and OCC on the properties of the production briquette [Volume 14, Issue 4, 2023, Pages 415-431]
-
Resin content
Investigation the Effect of Increasing Board Density and Amount of UF Resin on Particleboard Properties [Volume 2, Issue 1, 2011, Pages 103-112]
-
Resin؛ Py-GC-MS
Characterization and Removal of Resins from Mixed Tropical Hardwoods Kraft Pulp [Volume 1, Issue 1, 2011, Pages 44-56]
-
Resistance properties
Cellulose nanofibers made from waste printing and writing papers and its effect on the properties of recycled paper [Volume 12, Issue 2, 2021, Pages 185-194]
-
Response surface methodology
The effect of dimensional changes of flange and web in I-joist on its bending strength [Volume 10, Issue 4, 2019, Pages 507-520]
-
Response surface methodology
Modeling and Predicting the optimal conditions in microcrystal cellulose production from bagasse using the Response Surface Methodology (RSM) [Volume 13, Issue 2, 2022, Pages 225-238]
-
Response surface methodology (RSM)
Optimization of production variables of natural fibers- cement composites by response surface methodology (RSM) [Volume 11, Issue 1, 2020, Pages 97-108]
-
Restoration
Investigation the effect of Thiophanate-methyl on the ageing of Gall ink of the historical papers
[Volume 12, Issue 2, 2021, Pages 195-205]
-
Retention
Methods of retention increasing urea formaldehyde resin in order to produce wood-polymer from Paulownia [Volume 5, Issue 1, 2014, Pages 107-117]
-
Retention
Penetrability of nano-wollastonite into the poplar wood and its effect on wood durability and dimensional stability [Volume 8, Issue 2, 2017, Pages 267-282]
-
Retention
Using Zeolite as a Filler with Chitosan Biopolymer in Papermaking [Volume 11, Issue 3, 2020, Pages 407-417]
-
Rice husk
Production of Nanocellulose from Rice Husk [Volume 4, Issue 2, 2013, Pages 153-163]
-
Ronckel Coefficient
Investigate of Biometric andChemical Properties of Ammodendron persicum Fibers (Case Study; Zirkouh area - Qaenat City, South Khorasan, Iran) [Volume 10, Issue 1, 2019, Pages 49-62]
-
Rosenheim
The impact of different factors on particles quality and energy consumption in knife ring flaker [Volume 10, Issue 2, 2019, Pages 205-215]
-
Rotation speed
Study on Influensive Factors on Surface Quality and Edges of Through- Holes Bored in Particleboard and MDF [Volume 3, Issue 1, 2013, Pages 67-79]
-
Roughness
Study on Adhesion Strength of clear Coatings in Beech -Furfuryl alcohol wood polymer [Volume 7, Issue 1, 2016, Pages 115-127]
-
Roughness
The effect of tension wood on roughness of poplar wood and its modification by steaming [Volume 7, Issue 3, 2016, Pages 323-333]
-
Roughness
The effect of Cerium Dioxide Nanoparticles on the Physical Properties of Polyurethane Clear Coating [Volume 8, Issue 4, 2017, Pages 645-656]
-
Roughness
The Effect of layers made off clear coats on the color changes and surface quality of wood after accelerated weathering in urban furniture [Volume 9, Issue 4, 2018, Pages 561-574]
-
Roughness
Investigating the changes in the surface quality of common species in furniture industry using chemical vapors [Volume 10, Issue 1, 2019, Pages 63-75]
S
-
Sanding sequence
Effect of species type and sanding sequence on the adhesion strength and the interphase region of Polyurethane coating and veneer [Volume 11, Issue 2, 2020, Pages 317-332]
-
Sandwich Panels
The Effect of Face and Adhesive Types on Mechanical Properties of
Sandwich Panels Made from Honeycomb Paper [Volume 4, Issue 2, 2013, Pages 141-152]
-
Sandwich Panels
Effect of Faces Type and Thickness on Mechanical Properties
of Sandwich Panels [Volume 5, Issue 1, 2014, Pages 85-92]
-
Sapwood
Effect of Drying Method on the Permeability Coefficient of
Oak Wood (Quercus infactoria) [Volume 5, Issue 1, 2014, Pages 1-9]
-
Sapwood
Determination of sapwood area in Pinus nigra by electrical impedance tomography [Volume 12, Issue 1, 2021, Pages 73-82]
-
Satisfaction
Identifying and analyzing the factors affecting the loyalty of customers in the home furniture industry (case study: Rasht city) [Volume 14, Issue 1, 2023, Pages 17-30]
-
Saw dust
The Study of mechanical and morphological properties of recycled polyethylene/saw dust from cutting of MDF composites [Volume 8, Issue 2, 2017, Pages 185-195]
-
Sawdust
Optimization of properties of cement-bonded particleboard manufactured from cotton stalk and sawdust containing calcium chloride CaCl2 as an additive [Volume 7, Issue 1, 2016, Pages 55-68]
-
Sawdust
Preparation of bio-polyols from lignocellulosic waste by liquefaction [Volume 9, Issue 3, 2018, Pages 313-321]
-
Sawdust
mechanical properties of light weight sandwich panel made of sawdust and waste rubber [Volume 10, Issue 4, 2019, Pages 521-530]
-
Scanning electron microscope
The effect of combined colloidal nano silver-hydrothermal treatment on weight changes and chemical structure of beech wood (Fagus orientalis) [Volume 6, Issue 1, 2015, Pages 109-118]
-
Scanning electron microscopy
Construction of lightweight and resistant concrete with silica and wooden particles [Volume 8, Issue 4, 2017, Pages 585-603]
-
Scanning microscopic images
The effect of different modification conditions on the efficiency of poplar wood epoxidation and the physical properties of the product [Volume 11, Issue 4, 2020, Pages 645-656]
-
Schiff Base
Synthesis and characterization of aminated Lignin-based Hydrogel [Volume 12, Issue 4, 2021, Pages 551-560]
-
Screw
The predicting ultimate of joint withdrawal resistance constructed of plywood with regression models application according to diameter and penetrating depth [Volume 4, Issue 2, 2013, Pages 11-22]
-
Screw
Determination of Screw and Nail Withdrawal Strengths in Parallel and Perpendicular to Grain of some Hardwoods of Iran [Volume 3, Issue 2, 2013, Pages 171-180]
-
Screw
Investigation of shear strength of joints made of medium-density fiberboard and particleboard with screw connectors [Volume 14, Issue 4, 2023, Pages 329-338]
-
Screw diameter
Investigation of the relations between screw diameter and pilot hole diameter with withdrawal resistance in LVL for establishing regression model [Volume 8, Issue 4, 2017, Pages 549-561]
-
Screw withdrawal resistance
Investigation of the relations between screw diameter and pilot hole diameter with withdrawal resistance in LVL for establishing regression model [Volume 8, Issue 4, 2017, Pages 549-561]
-
Seismic
Study of Behavior and Measurement of Seismic Resistant Connections in Light Structural Frame Out of Aspen [Volume 3, Issue 1, 2013, Pages 81-97]
-
Self-assembly layering
Effect of Self-assembly Layering Factors of Cationic Starch on Pulp Zeta Potential [Volume 13, Issue 1, 2022, Pages 83-96]
-
SEM
The effect of nanoclay particles and compatibilization of oxidized polypropylene in molten phase on the mechanical and physical properties of wood-plastic composite [Volume 9, Issue 1, 2018, Pages 137-151]
-
Set recovery
Effect of press closing speed on stress relaxation and set recovery of densified alder wood [Volume 10, Issue 4, 2019, Pages 469-477]
-
Set recovery
Effect of poplar wood impregnation with epoxidized soybean oil on the set recovery [Volume 11, Issue 3, 2020, Pages 381-394]
-
Set recovery
Effect of alkaline pretreatment and surface impregnation on the set recovery of densified poplar wood [Volume 11, Issue 3, 2020, Pages 345-354]
-
Shast kolateh Forest
The Effect of Storage Time of Hornbeam Billet Wood on its Physical and Mechanical Properties in the Forest (Case Study of Gorgan Shastkalateh Forest) [Volume 9, Issue 4, 2018, Pages 511-524]
-
Shear parallel to the grain
Mechanical properties of Beech -Furfuryl alcohol wood polymer [Volume 4, Issue 2, 2013, Pages 131-140]
-
Shear strength
The Effect of Nanoclay on Physicochemical, Mechanical and Thermal Properties of New Urea- Glyoxal Resin [Volume 6, Issue 1, 2015, Pages 133-143]
-
Shear strength
The Effect of Soy-Flour Mesh Size and its Adhesive Acidity Changes on Shear Strength of Plywood [Volume 7, Issue 3, 2016, Pages 377-386]
-
Shear strength
Evaluation of resistance of wooden biscuit joints in mediumdensity fiberboard and particleboard under tensile and shear loads in T and L-type members [Volume 13, Issue 2, 2022, Pages 187-200]
-
Shear strength
Investigation of shear strength of joints made of medium-density fiberboard and particleboard with screw connectors [Volume 14, Issue 4, 2023, Pages 329-338]
-
Shellac
Effect of coating with Shellac on acoustic properties in white mulberry wood [Volume 9, Issue 1, 2018, Pages 27-40]
-
Short run elasticity
Analysis of Import Demand Function of Iranian Paper and Paperboard Using Bond Test [Volume 11, Issue 3, 2020, Pages 457-469]
-
Shoulder thickness
Effect of shoulder thickness on bending moment capacity of mortise and loose
tenon joint [Volume 4, Issue 1, 2013, Pages 65-75]
-
Shrinkage
The Effects of Agroforestry Practices on Physical Propertiesin of Poplus Wood in Radial and Longitudinal Axes [Volume 2, Issue 2, 2011, Pages 53-64]
-
Silica fume gel
Investigation on Effect of Additives on Thermal Conductivity of Herbaceous Fiber Reinforced Cement Composite [Volume 3, Issue 2, 2013, Pages 39-52]
-
Silver nanoparticles
Modification of The Beech (Fagus orientalis) Wood Properties via Electricity [Volume 13, Issue 1, 2022, Pages 27-35]
-
Silver nitrate
Investigation of releasing mechanism of silver nitrate in the nanocellulose based hydrogel pad for burn healing [Volume 11, Issue 2, 2020, Pages 333-344]
-
Silybum marianum
Investigation on anatomical, chemical and pulping characteristics
of Silybum marianum stem [Volume 4, Issue 2, 2013, Pages 59-68]
-
Sistan and Baluchistan province
Determination and Prioritiz ation of Effective Criteria in Construction of Particleboard Factories with Using Wastes of Tamarisk, Palms and Musa Trees
Case Study: Sistan and Baluchestan province [Volume 6, Issue 1, 2015, Pages 13-29]
-
Site Selection
Effective Indices in Site Selection of Furniture Industry from Point of View of Suppliers in North Khorasan Province: Application of AHP Method [Volume 2, Issue 2, 2011, Pages 135-145]
-
Skin tissue engineering
Fabrication of Bilayer Nanocellulosic Aerogel Scaffold and Evaluation of Its Properties for Skin Tissue engineering [Volume 10, Issue 2, 2019, Pages 287-296]
-
Sliding table panel saw
Sliding table panel saw, Machining parameters, Sound level meter, Ergonomics, Sound emission [Volume 12, Issue 4, 2021, Pages 465-479]
-
SO2-ethanol-water (SEW)
Effects of washing method on the bagasse pulping characteristics by Sulfur Dioxide- Ethanol-Water (SEW) process [Volume 7, Issue 4, 2016, Pages 549-559]
-
Soda Pulp
The Effect of Protexin Enzyme for Bagasse Storage on Pulp and Paper Properties [Volume 10, Issue 3, 2019, Pages 457-468]
-
Soda Pulp
Production of nanocrystals and nanofibrils from unbleached and bleached soda pulp with ECFlight bleaching sequence and comparison of their morphological and thermal properties [Volume 13, Issue 4, 2022, Pages 457-471]
-
Soda pulping
Effect of Diluted Acid Pre-Extraction on Soda Pulping of Bagasse [Volume 5, Issue 1, 2014, Pages 119-128]
-
Soda pulping
Investigation on the Influence of Alkaline Pre-Extraction of Barley Straw on Soda and Monoethanolamine Pulps Properties [Volume 9, Issue 4, 2018, Pages 485-495]
-
Soda- urea
Papermaking Properties of Carpinus betulus with kraft, Soda and Soda-Urea Pulping Processes [Volume 3, Issue 2, 2013, Pages 105-117]
-
Sodium sulfite
Extraction of lignin with lignoboost process and production of water-soluble sulfonated derivatives from lignin of bagasse soda black liquor [Volume 10, Issue 2, 2019, Pages 237-247]
-
Softwood Kraft Lignin
Identification and Evaluation of characteristics of Fractions of Industrial Softwood Kraft Lignin Separated by Single Step Fractionation [Volume 10, Issue 2, 2019, Pages 297-309]
-
Sol-gel
Microscopic investigation on the effects of wood surface modification with sol-gel method on the quality of polyurethane and alkyd coatings [Volume 8, Issue 4, 2017, Pages 509-520]
-
Solubility
Extraction of lignin with lignoboost process and production of water-soluble sulfonated derivatives from lignin of bagasse soda black liquor [Volume 10, Issue 2, 2019, Pages 237-247]
-
Solvent extraction
Chemical Characterization of Ziziphus spina-chrisiti Wood Extractives using Gas Chromatography/Mass Spectroscopy Technique [Volume 4, Issue 2, 2013, Pages 69-78]
-
Sound absorption coefficient
Study on the possibility of using bagasse in manufacture of sound-proof particleboard [Volume 3, Issue 1, 2013, Pages 43-52]
-
Sound absorption coefficient
Assessing the effect of air- gap in acoustic panels’ sound absorption made of
date palm fiber (Phoenix dactylifera) [Volume 12, Issue 4, 2021, Pages 575-586]
-
Sound emission
Sliding table panel saw, Machining parameters, Sound level meter, Ergonomics, Sound emission [Volume 12, Issue 4, 2021, Pages 465-479]
-
Sound level meter
Sliding table panel saw, Machining parameters, Sound level meter, Ergonomics, Sound emission [Volume 12, Issue 4, 2021, Pages 465-479]
-
Soxhlet
Chemical Characterization of Ziziphus spina-chrisiti Wood Extractives using Gas Chromatography/Mass Spectroscopy Technique [Volume 4, Issue 2, 2013, Pages 69-78]
-
Soy adhesive
The Effect of Soy-Flour Mesh Size and its Adhesive Acidity Changes on Shear Strength of Plywood [Volume 7, Issue 3, 2016, Pages 377-386]
-
Soy bean flour
Application of acetylated nanocrystalline cellulose in modified soy-based adhesive for plywood [Volume 8, Issue 1, 2017, Pages 79-94]
-
Soybean oil
Effect of poplar wood impregnation with epoxidized soybean oil on the set recovery [Volume 11, Issue 3, 2020, Pages 381-394]
-
Soy flour classifying
The Effect of Soy-Flour Mesh Size and its Adhesive Acidity Changes on Shear Strength of Plywood [Volume 7, Issue 3, 2016, Pages 377-386]
-
Soy protein isolate
A novel paper packaging coated with polyethylene wax based dispersion barrier coating for food packaging applications [Volume 11, Issue 1, 2020, Pages 85-95]
-
Spectrometry
Comparing the performance of acrylate and vinyl cross linkers on the properties of Populus deltoides / styrene wood-polymer composite [Volume 11, Issue 1, 2020, Pages 45-56]
-
Spot content
Effect of Dispersion and Bleaching on the Mechanical and Optical Properties of Deinked Recycled Pulp [Volume 7, Issue 1, 2016, Pages 33-41]
-
Spray
The investigation of the spraying of cellulose nanofibers (CNF) and Nano chitosan on the properties writing & printing (W&P) Paper [Volume 10, Issue 2, 2019, Pages 249-260]
-
Spray-drying
The effect of different drying methods on cellulosic nanofibers and resulting composites [Volume 6, Issue 2, 2015, Pages 285-298]
-
SR degree
Effect of Lactase Enzyme on Delignification and Physical
Properties of OCC Pulp [Volume 3, Issue 2, 2013, Pages 157-170]
-
Staple joint
Determination of withdrawal resistance of staple joints constructed with various members of upholstered furniture [Volume 8, Issue 1, 2017, Pages 95-108]
-
Starch
Identification of Quantitative and Qualitative Papermaking Parameters of OCC Pulp Fibers [Volume 6, Issue 2, 2015, Pages 265-274]
-
Starch
Modification of NSSC pulp broke fibers using layering method and investigating its effect on paper properties [Volume 7, Issue 3, 2016, Pages 413-423]
-
Starch
Evaluation of the starch films containing cellulose and lignocellulose for food packaging [Volume 10, Issue 1, 2019, Pages 35-47]
-
Starch
Study of antibacterial activity and other properties of paper coated by selenium nanoparticles [Volume 12, Issue 1, 2021, Pages 29-44]
-
Starch
The potential of replacing the starch with soda and formacell lignins in surface sizing and evaluation of physical and mechanical properties of produced liner papers [Volume 12, Issue 4, 2021, Pages 453-464]
-
Starch
A Comparison on the performance of cationic starch in external and internal applications for recycled linerboard [Volume 13, Issue 3, 2022, Pages 301-311]
-
Starch
Improvement of Physical and Mechanical Properties of Testliner Coated by Unmodified and Modified Lignins [Volume 14, Issue 1, 2023, Pages 1-15]
-
Static Bending
Mechanical properties of Beech -Furfuryl alcohol wood polymer [Volume 4, Issue 2, 2013, Pages 131-140]
-
Static modulus of elasticity
Evaluation of Modulus of Elasticity in Standing Trees and Sawn Wood in Populous deltoids using Nondestructive Stress Wave Testing [Volume 5, Issue 1, 2014, Pages 11-20]
-
Steaming
Study on Leaching of Copper Nanoparticles in Combined Impregnation- Densification Treatments of wood after Accelerated Aging [Volume 6, Issue 1, 2015, Pages 159-165]
-
Steaming
The effect of tension wood on roughness of poplar wood and its modification by steaming [Volume 7, Issue 3, 2016, Pages 323-333]
-
Steaming treatment
Evaluation of Effect of Steam Pretreatment on Water and Liquor Absorption of Wood Particles [Volume 2, Issue 2, 2011, Pages 111-120]
-
Steel dowel
Investigation of Embedment Strength of Metal Fasteners In Wood Engineered Product And Comparison With EC 5 Predicted Values [Volume 9, Issue 1, 2018, Pages 87-101]
-
Stem wood
The Comparison of Kraft Pulp Properties from Stem and
Branchwood of Hornbeam [Volume 5, Issue 1, 2014, Pages 139-152]
-
Stickies
Effect of cationic polyDADMAC-based fixing agent on strength properties of OCC pulp [Volume 10, Issue 4, 2019, Pages 605-616]
-
Stiffness
Stiffness changes in MDF kitchen cabinet after accelerated aging test [Volume 4, Issue 1, 2013, Pages 131-141]
-
Stone paper
Evaluation and comparision of mechanical and barrier properties of stone paper and gloss paper [Volume 10, Issue 3, 2019, Pages 373-384]
-
Ston Index
The Effect of Targeted Subsidies on the Demand Patern of Wood and its Products in Khorramabad City [Volume 9, Issue 4, 2018, Pages 525-535]
-
Strain
Analysis of stress- strain distribution of dowel and glue line in L-type furniture joint by means of finite element method [Volume 8, Issue 2, 2017, Pages 297-307]
-
Strategic Marketing
Provide a strategic marketing model in the furniture industry based on exploratory mixed research plan [Volume 13, Issue 2, 2022, Pages 171-186]
-
Strategy
Identification and Evaluation of Oncoming Changes of Wood and Paper Industries of the Country [Volume 2, Issue 2, 2011, Pages 27-38]
-
Strawboard
Study of physical and mechanical properties of produced strawboard using bio epoxy tannins resin [Volume 7, Issue 2, 2016, Pages 271-282]
-
Strength
Effect of Cationised Long Fibers as Additive On Mechanical Properties of CMP [Volume 4, Issue 1, 2013, Pages 161-170]
-
Strength and barrier properties
The effect of corn zein coating on the strength and barrier properties of liner paper [Volume 13, Issue 2, 2022, Pages 213-223]
-
Strength Properties
The influence of type of calcium carbonate fillers on the performance AKD and mechanical properties of printing and writing paper [Volume 7, Issue 1, 2016, Pages 69-77]
-
Strength Properties
Effect of structural characteristics of process water on paper properties made from recycled fiber [Volume 10, Issue 3, 2019, Pages 337-346]
-
Strength Properties
The product of pulp from hornbeam with alkaline sulfite- AQ process [Volume 10, Issue 4, 2019, Pages 479-494]
-
Strength Properties
Effect of cationic polyDADMAC-based fixing agent on strength properties of OCC pulp [Volume 10, Issue 4, 2019, Pages 605-616]
-
Strength Properties
effect of cellulase on drainage and strength properties of virgin and recycled pulps [Volume 12, Issue 2, 2021, Pages 207-215]
-
Strength Properties
Environmental and strength properties evaluation of bleached recycled pulp with calcium hydroxide [Volume 13, Issue 1, 2022, Pages 71-81]
-
Stress
Analysis of stress- strain distribution of dowel and glue line in L-type furniture joint by means of finite element method [Volume 8, Issue 2, 2017, Pages 297-307]
-
Stress
Effect of drought, fertilization, wounding and bending treatments on lignin content and composition of eucalyptus seedlings (Eucalyptus camaldulensis) [Volume 11, Issue 4, 2020, Pages 553-569]
-
Stress carrying capacity
Investigating the Stress Carrying Capacity of Corner Joints In The
Furniture Frame Fabricated With Dowel [Volume 5, Issue 1, 2014, Pages 21-32]
-
Stress carrying capacity
Investigation of the effect of modified poly vinyl acetate on the stress carrying capacity of corner joints in the wood members joined with dowel [Volume 9, Issue 3, 2018, Pages 323-336]
-
Stress carrying capacity
Investigating the stress carrying capacity of miter corner joints made with biscuit under diagonal tension and compression loading [Volume 10, Issue 3, 2019, Pages 323-336]
-
Styrene
Investigation on physical behavior of styrene wood-polymer in different concentrations of monomer [Volume 7, Issue 2, 2016, Pages 231-239]
-
Styrene
The evalaution of decay resistance and dimentional stability of poplar wood treated with Styrene/Nano wellastonite [Volume 10, Issue 3, 2019, Pages 445-455]
-
Styrene
Comparing the performance of acrylate and vinyl cross linkers on the properties of Populus deltoides / styrene wood-polymer composite [Volume 11, Issue 1, 2020, Pages 45-56]
-
Sub-criteria
Determination of Effective Criteria for Location Selection of Kiln Wood Drying Plants by AHP Technique [Volume 1, Issue 2, 2011, Pages 55-67]
-
Sulfide sodium
The Survey of Chemical Paper Pulp Properties Produced from Rice Straw Based on Formaldehyde Sulfide Method. [Volume 3, Issue 2, 2013, Pages 13-23]
-
Sulfomethylation
Improvement of Physical and Mechanical Properties of Testliner Coated by Unmodified and Modified Lignins [Volume 14, Issue 1, 2023, Pages 1-15]
-
Sulfonation
Extraction of lignin with lignoboost process and production of water-soluble sulfonated derivatives from lignin of bagasse soda black liquor [Volume 10, Issue 2, 2019, Pages 237-247]
-
Sulfur
physical and mechanical properties of wood-plastic based on MDF sawdust with the addition of sawdust coal, sulfur and recycled rubber powder [Volume 14, Issue 4, 2023, Pages 339-349]
-
Sunflower stalk particles
Study on the Possibility of Using Sunflower Stalk in Particleboard Production [Volume 2, Issue 2, 2011, Pages 83-97]
-
Super-absorbent
The effect of kaolinite on the properties of lignocellulose superabsorbent from old corrugated container fiber fines [Volume 10, Issue 4, 2019, Pages 531-542]
-
Surface adhesion
Identifying the wood type and investigating the quality of imported wooden ice cream sticks [Volume 12, Issue 4, 2021, Pages 495-506]
-
Surface densification
Effect of Surface Densification on Treatability of Scots pine Wood and Micro-Distribution of Impregnating Liquid [Volume 11, Issue 1, 2020, Pages 57-69]
-
Surface layers
The effect of using waste newspaper in surface layers on physical and mechanical properties of three-layer particleboard [Volume 7, Issue 4, 2016, Pages 537-547]
-
Surface modification
Determination the optimal condition for surface modification of spruce wood with Rosin Maleic [Volume 11, Issue 4, 2020, Pages 657-668]
-
Surface quality
Study on Influensive Factors on Surface Quality and Edges of Through- Holes Bored in Particleboard and MDF [Volume 3, Issue 1, 2013, Pages 67-79]
-
Surface roughness
Investigation and Evaluation on Influence of Machining (CNC) Conditions on Surface Quality of Paulownia Wood [Volume 2, Issue 2, 2011, Pages 1-13]
-
Surface roughness
Effect furfurylation on physical properties and surface quality of two species of Beech and Fir [Volume 7, Issue 3, 2016, Pages 400-411]
-
Surface roughness
Evaluation of wood machining parameters and surface quality in cutting process by water jet without abrasive material [Volume 12, Issue 3, 2021, Pages 429-440]
-
Surface roughness
Influence of poplar wood densification on surface characteristics and adhesion strength [Volume 12, Issue 4, 2021, Pages 537-550]
-
Surface sizing
Concentration of Anionic starch Solution in Paper Surface Sizing on Physical and Strength Properties of Recycled Paper [Volume 7, Issue 4, 2016, Pages 487-497]
-
Surface sizing
Influence of using native starch through modification with α-amylase enzyme for surface paper sizing as an alternative to oxidized starch [Volume 11, Issue 3, 2020, Pages 433-443]
-
Surface sizing
The potential of replacing the starch with soda and formacell lignins in surface sizing and evaluation of physical and mechanical properties of produced liner papers [Volume 12, Issue 4, 2021, Pages 453-464]
-
Surface treatment
Enhancement of recycled board strength by surface treatment and additives on size-press section [Volume 13, Issue 1, 2022, Pages 97-106]
-
Surface treatment
A Comparison on the performance of cationic starch in external and internal applications for recycled linerboard [Volume 13, Issue 3, 2022, Pages 301-311]
-
Surfactant؛ Hardwoods
Characterization and Removal of Resins from Mixed Tropical Hardwoods Kraft Pulp [Volume 1, Issue 1, 2011, Pages 44-56]
-
Sustainable development
Survey of Effective Criteria for Sustainable Development of Poplar Wood Farming in Iran by Pair Comparisons Method [Volume 9, Issue 2, 2018, Pages 235-249]
-
Sustainable production
Determination and ranking cleaner production criteria by using analytic hierarchy process (Case study: Latif paper products company) [Volume 8, Issue 4, 2017, Pages 573-584]
-
SWOT
Strategic planning for wood farming development (Case study: Urmia) [Volume 8, Issue 4, 2017, Pages 533-548]
T
-
TAED
A Comparison Between Alkali Peroxide and Activated Peroxide Processes in Bleaching Hardwoods Chemi-mechanical Pulp [Volume 3, Issue 2, 2013, Pages 91-103]
-
Taguchi design of experiments
Investigation on fracture toughness and internal bonding of oriented strand board (OSB) made from Poplar [Volume 9, Issue 4, 2018, Pages 549-559]
-
Tamarisk
Wood anatomy and physical and chemical properties of fast growing Athel tamarisk (Tamarix aphylla L.) [Volume 7, Issue 4, 2016, Pages 511-522]
-
Tamarisk wood
Determination and Prioritiz ation of Effective Criteria in Construction of Particleboard Factories with Using Wastes of Tamarisk, Palms and Musa Trees
Case Study: Sistan and Baluchestan province [Volume 6, Issue 1, 2015, Pages 13-29]
-
Tanic Acid
Investigating the thermal properties of bio -adhesive tanic acid and gallic acid with furfural [Volume 14, Issue 1, 2023, Pages 55-63]
-
Tannic acid
Investigation of the Amount of Tannic Acid in Bark Oak (Quercus castanifolia) [Volume 1, Issue 1, 2011, Pages 27-35]
-
Tannin
Use of Soy Flour-Tannin Adhesive for Particleboard (Dry Condition) [Volume 8, Issue 1, 2017, Pages 131-143]
-
Tannin
Use of Modified Soy Adhesive for Manufacturing Fiberboard from Wood and OCC Fiber [Volume 12, Issue 2, 2021, Pages 247-257]
-
Tar
The use of cellulose nanofibers to reduce harmful substances from cigarette smoke [Volume 11, Issue 1, 2020, Pages 19-31]
-
Targeting Subsidies
The Effect of Targeted Subsidies on the Demand Patern of Wood and its Products in Khorramabad City [Volume 9, Issue 4, 2018, Pages 525-535]
-
Tear strength
Investigation on the possibility of Manufacturing the Kraft pulp from Criptomeria wood [Volume 6, Issue 1, 2015, Pages 145-157]
-
Technology acquisition
Choosing a technology acquisition method in the paper industry with a fuzzy decision-making approach [Volume 14, Issue 2, 2023, Pages 199-214]
-
Technology strategy
Choosing a technology acquisition method in the paper industry with a fuzzy decision-making approach [Volume 14, Issue 2, 2023, Pages 199-214]
-
Temperature
Analyze of Oak Chronology Network with Climate in Hyrcanian Forests [Volume 4, Issue 2, 2013, Pages 91-100]
-
Temperature
Comparing the impact of climate variables on healthy and declined masses of oak (Quercus brantti Lindl) in the “Khorram Abad” city [Volume 7, Issue 4, 2016, Pages 591-600]
-
Tensile
A Study on Tensile Behavior and Water Uptake of Wood Powder-Composites Based on Epoxy and Unsaturated Polyester Resins [Volume 3, Issue 2, 2013, Pages 141-156]
-
Tensile energy absorption (TEA)
Improvement of wet and dry layer strengths of paper from chemi-mechanical pulp using polyamide epichlorohydrin and cellulose nanofibers vs imported long fiber Kraft pulp [Volume 11, Issue 4, 2020, Pages 627-643]
-
Tensile modulus
Investigating the characteristics of wood-plastic composites made from bagasse [Volume 14, Issue 3, 2023, Pages 271-283]
-
Tensile strength
Study on the tensile strength of ready-to-assemble and fixed corner joints on
medium density fiberboard [Volume 4, Issue 1, 2013, Pages 49-63]
-
Tensile strength
An investigation on anatomical and mechanical properties of vascular bundles in Date palm (case study: Ahvaz countryside) [Volume 8, Issue 1, 2017, Pages 109-118]
-
Tensile strength
The effect of the presence of skin on the mechanical properties of milkweed wood flour-plastic composite [Volume 10, Issue 1, 2019, Pages 115-124]
-
Tensile strength
Investigation of performance and fracture monitoring of dowel-welded joint by micrographs of scanning electron microscopy [Volume 10, Issue 4, 2019, Pages 589-603]
-
Tensile strength
Effects of maleic anhydride and oxidizer on mechanical and contact angle of polypropylene and cellulose nanocrystals composites. [Volume 12, Issue 2, 2021, Pages 299-307]
-
Tensile strength and physical properties
The Infuence of Coupling Agent and the Content of Fibers on Tensile Strength and Physical Properties of Cotton Fiber Stem/Recycled Polypropylene Composites [Volume 3, Issue 2, 2013, Pages 131-140]
-
Tension wood
The effect of tension wood on roughness of poplar wood and its modification by steaming [Volume 7, Issue 3, 2016, Pages 323-333]
-
Tension wood
Anatomical Variations in Tension Wood of Populus alba under alternate bending, nitrogen fertilization and gibberellin treatments [Volume 11, Issue 1, 2020, Pages 147-160]
-
Testliner Paper
Improvement of Physical and Mechanical Properties of Testliner Coated by Unmodified and Modified Lignins [Volume 14, Issue 1, 2023, Pages 1-15]
-
Textile fibers
The effect of using the textile waste fibers and nanoclay particles on physical and mechanical properties of composite made from wood flour/polypropylene [Volume 6, Issue 1, 2015, Pages 1-12]
-
The acoustic tomography
Evaluation of the internal decay of the Quercus castaneifolia Tree through the non - destructive test procedure of the acoustic tomography [Volume 12, Issue 1, 2021, Pages 163-173]
-
The internal decay
Evaluation of the internal decay of the Quercus castaneifolia Tree through the non - destructive test procedure of the acoustic tomography [Volume 12, Issue 1, 2021, Pages 163-173]
-
Thermal conductivity
Minimizing hot-press time in the manufacturing process
of wood plastic composites [Volume 4, Issue 2, 2013, Pages 79-90]
-
Thermal conductivity
Investigation on Effect of Additives on Thermal Conductivity of Herbaceous Fiber Reinforced Cement Composite [Volume 3, Issue 2, 2013, Pages 39-52]
-
Thermal Conductivity Measurement Device
Design, Construction, and Performance Analysis of a Wood Thermal Conductivity Measurement Device using Flat Plate Heat Pipes [Volume 1, Issue 2, 2011, Pages 115-123]
-
Thermal modification
Measurement of Fiber Saturation Point of Wood Using Differential Scanning Calorimetry: Measurement Fundamentals and Experimental Results [Volume 7, Issue 4, 2016, Pages 615-623]
-
Thermal modification
Effect of densification on the practical properties of chemical and thermal modified poplar wood [Volume 11, Issue 2, 2020, Pages 185-197]
-
Thermal modification
Hydrogel composite based on thermal modified carboxymethyl cellulose and nanozeolite [Volume 13, Issue 4, 2022, Pages 433-443]
-
Thermal modification
The effect of heat treatment on the physical, chemical and anatomical characteristics of date palm wood [Volume 14, Issue 2, 2023, Pages 155-167]
-
Thermal properties
The Effect of Nanoclay on Physicochemical, Mechanical and Thermal Properties of New Urea- Glyoxal Resin [Volume 6, Issue 1, 2015, Pages 133-143]
-
Thermal properties
Thermal and colorimetry properties of bleached wheat straw/LDPE biocomposites [Volume 7, Issue 2, 2016, Pages 283-295]
-
Thermal properties
Nanocellulose based biohydrogel: Preparation and characterization of some properties [Volume 9, Issue 4, 2018, Pages 497-509]
-
Thermal properties
Investigating the effect of pH changes and molar ratio on the properties of melamine formaldehyde resin for impregnating decoration paper [Volume 14, Issue 4, 2023, Pages 363-376]
-
Thermal treatment
Thermal treatment and its effect on the gas permeability of Populus nigra [Volume 4, Issue 1, 2013, Pages 151-159]
-
The sound wave velocity
Evaluation of the internal decay of the Quercus castaneifolia Tree through the non - destructive test procedure of the acoustic tomography [Volume 12, Issue 1, 2021, Pages 163-173]
-
The wastes
Utilization of the various recycled fibers composition in producing packaging paper [Volume 14, Issue 1, 2023, Pages 65-78]
-
Thickness swelling parameter
Effect of Impact Modifier Type on Water Absorption and Thickness Swelling Parameters of Wood Flour- Recycled Polypropylene Composites [Volume 2, Issue 2, 2011, Pages 115-24]
-
Thickness swelling rate
Long-term water absorption and thickness swelling and determine their characteristics in wood flour/polypropylene/Nano SiO2 nanocomposite [Volume 7, Issue 2, 2016, Pages 241-254]
-
Thiophanate-methyl
Investigation the effect of Thiophanate-methyl on the ageing of Gall ink of the historical papers
[Volume 12, Issue 2, 2021, Pages 195-205]
-
Three-layer particleboard
The influence of treatment and shelling ratio on the mechanical properties of particleboard manufactured from Canola (Brassica napus) stalk particles [Volume 7, Issue 2, 2016, Pages 255-270]
-
Three-layer particleboard
Investigation the effect of recycled polyethylene powder on physical and mechanical properties of three-layer particleboard [Volume 8, Issue 3, 2017, Pages 441-452]
-
Time-loading rate superposition
Effect of press closing speed on stress relaxation and set recovery of densified alder wood [Volume 10, Issue 4, 2019, Pages 469-477]
-
Tissue Paper
Effect of Dispersion and Bleaching on the Mechanical and Optical Properties of Deinked Recycled Pulp [Volume 7, Issue 1, 2016, Pages 33-41]
-
Titanium Dioxide nanoparticle
Use of titanium dioxide nanoparticles and aqueous methylene blue on ECF bleaching of bagasse pulp [Volume 11, Issue 2, 2020, Pages 211-224]
-
Titanium dioxide Nanoparticles
Effect of weathering on mechanical and physical properties of wood-polyethylene composite containing of titanium dioxide nanoparticles, photo stabilizer and heat treated wood [Volume 8, Issue 3, 2017, Pages 349-360]
-
Toughness
Influence of Heat Treatment Conditions on Strength Properties of Poplar Wood (Populus deltoides) [Volume 2, Issue 2, 2011, Pages 161-170]
-
Trametes versicolor
Effect of environmental changes (temprature and moisture) on destructive behaviour of the white rot fungus Trametes versicolor on chestnut-leaved oak [Volume 9, Issue 1, 2018, Pages 75-85]
-
Transparent Aacrylic paint
Improving Weathering Performance of Beech Wood Coated with Acrylic Paint by nano zinc oxide and nano cellulose [Volume 10, Issue 2, 2019, Pages 311-321]
-
Transparent nanocomposite
Fabrication and properties evaluation of three layered transparent nanocomposite reinforced with cellulose and chitin nanofibers [Volume 10, Issue 4, 2019, Pages 495-505]
-
Treatability
Effect of Surface Densification on Treatability of Scots pine Wood and Micro-Distribution of Impregnating Liquid [Volume 11, Issue 1, 2020, Pages 57-69]
-
Tree felling
Industrial round-wood losses associated with motor-manual tree felling and bucking (Case study: Kheyrud forest, Iran) [Volume 6, Issue 1, 2015, Pages 67-78]
-
Tree palm
Evaluation of structural, physical and chemical properties of cellulose and nanocrystalline cellulose extracted from pruning palm trees wastes [Volume 12, Issue 1, 2021, Pages 95-107]
-
Tribological Properties
Investigation of using rice hask and paper waste to make free copper brake lining [Volume 11, Issue 4, 2020, Pages 571-583]
-
Trifluoroacetic acid
The effect of residual xylan on cellulose nanofiber production through electrospinning of wheat straw [Volume 10, Issue 4, 2019, Pages 543-558]
-
T shaped joint
The investigation of the affecting factors on withdrawal resistance of the wooden biscuit joints [Volume 11, Issue 1, 2020, Pages 121-131]
-
TSS
Investigation of Electro coagulation Process on TSS and COD Removal from Effluent of the Paper Recycling Mill Using Al Electrodes [Volume 3, Issue 2, 2013, Pages 53-64]
-
TSS
Effect of structural characteristics of process water on paper properties made from recycled fiber [Volume 10, Issue 3, 2019, Pages 337-346]
-
Type of calcium carbonate fillers
The influence of type of calcium carbonate fillers on the performance AKD and mechanical properties of printing and writing paper [Volume 7, Issue 1, 2016, Pages 69-77]
U
-
Ultrasound
Production of Nanocellulose from Rice Husk [Volume 4, Issue 2, 2013, Pages 153-163]
-
Unsaturated polyester resin
A Study on Tensile Behavior and Water Uptake of Wood Powder-Composites Based on Epoxy and Unsaturated Polyester Resins [Volume 3, Issue 2, 2013, Pages 141-156]
-
Upholster furniture
Determination of withdrawal resistance of staple joints constructed with various members of upholstered furniture [Volume 8, Issue 1, 2017, Pages 95-108]
-
Urea and Phenol formaldehyde
Investigation the Plywood Manufacturing of Paulownia (paulownia tomentosa) with Urea and Phenol Formaldehyde Adhesives [Volume 2, Issue 1, 2011, Pages 81-89]
-
Urea formaldehyde
Investigation the Potential Replacement of the Old Corrugated Container (OCC) and Poplar Wood Flour Instead of Wheat Flour such as Urea-formaldehyde Adhesive Filler in the Plywood Industry [Volume 2, Issue 1, 2011, Pages 115-125]
-
Urea formaldehyde
The Effect of Chemical Modification with Phenol Formaldehyde and Compression on Mechanical Properties of Paulownia (P.fortunie) Wood [Volume 3, Issue 1, 2013, Pages 13-27]
-
Urea formaldehyde resin
Methods of retention increasing urea formaldehyde resin in order to produce wood-polymer from Paulownia [Volume 5, Issue 1, 2014, Pages 107-117]
-
Urea formaldehyde resin
A Study on Physical and Mechanical Properties of Medium-Density Fiberboard (MDF) Made from Corn stalk and Wood fibers [Volume 2, Issue 2, 2011, Pages 39-52]
-
Urea formaldehyde resin
Study on the Possibility of Using Sunflower Stalk in Particleboard Production [Volume 2, Issue 2, 2011, Pages 83-97]
-
Urea formaldehyde resin
The effect of chemical treatment and compression percent on mechanical properties of Paulownia compressed wood [Volume 5, Issue 2, 2014, Pages 59-70]
-
Urea formaldehyde resin
The Effect of Soy-Flour Mesh Size and its Adhesive Acidity Changes on Shear Strength of Plywood [Volume 7, Issue 3, 2016, Pages 377-386]
-
Urea formaldehyde resin
Investigation of physical, mechanical properties and formaldehyde emission of medium density fiberboard manufactured from urea formaldehyde resin reinforced with nanocrystalline cellulose [Volume 8, Issue 2, 2017, Pages 197-209]
-
Urea formaldehyde resin
Investigation the effect of recycled polyethylene powder on physical and mechanical properties of three-layer particleboard [Volume 8, Issue 3, 2017, Pages 441-452]
-
Urea formaldehyde resin
Using of mulberry branches
For particleboard manufacture [Volume 9, Issue 1, 2018, Pages 117-126]
-
Urea formaldehyde resin
The effect of using Alkali sulfit-Anthraquinone (AS-AQ) liquor powder as filler of urea formaldehyde resin on functional properties of plywood [Volume 9, Issue 3, 2018, Pages 337-347]
-
Urea formaldehyde resin
Influence of additive of Chlorophytum comosum plant extract on physicochemical, structural and mechanical properties of urea formaldehyde resin [Volume 13, Issue 3, 2022, Pages 361-373]
-
Urea formaldehyde resin
Particles from grapevine pruning residue as a bio-based substitute for wood in hybrid particleboard production [Volume 13, Issue 4, 2022, Pages 509-518]
-
Urea-formaldehyde resin
Investigation on the Effect of Kenaf Core and Stalk Fiber on the Medium Density Fiber Board Properties Made of Poplar Fibers [Volume 2, Issue 2, 2011, Pages 99-110]
-
Urea-Glyoxal Resin
The Effect of Nanoclay on Physicochemical, Mechanical and Thermal Properties of New Urea- Glyoxal Resin [Volume 6, Issue 1, 2015, Pages 133-143]
-
Urea- Lignin- Glyoxal Resin
The Effect of Nanoclay on Physical and Mechanical Properties of Particleboard Made from Urea-Kraft Lignin- Glyoxal Green Wood Adhesive [Volume 8, Issue 1, 2017, Pages 119-129]
-
Urmia
Strategic planning for wood farming development (Case study: Urmia) [Volume 8, Issue 4, 2017, Pages 533-548]
-
UV absorbents
Effect of vegetable oils coatings containing UV absorbents on weathering resistance of
Effect of vegetable oils coatings containing UV absorbents on weathering resistance of heat treated wood [Volume 11, Issue 3, 2020, Pages 485-496]
V
-
Vanillin
Vanillin Production from kraft Liquor of Pinus eldarica [Volume 4, Issue 1, 2013, Pages 143-150]
-
Vegetable oils
Effect of vegetable oils coatings containing UV absorbents on weathering resistance of
Effect of vegetable oils coatings containing UV absorbents on weathering resistance of heat treated wood [Volume 11, Issue 3, 2020, Pages 485-496]
-
Veneer
Study on long term creep of two different types of compressed wood sheets used in library shelves [Volume 7, Issue 3, 2016, Pages 437-447]
-
Veneer
Effect of species type and sanding sequence on the adhesion strength and the interphase region of Polyurethane coating and veneer [Volume 11, Issue 2, 2020, Pages 317-332]
-
Vertical Intra Industry Trade
Investigating the status of wood and its products Intra-industry trade in Iran [Volume 10, Issue 1, 2019, Pages 125-141]
-
Vibrating sample magnetometer
Effects of Modified Iron Oxide Nanoparticles on the Thermal and Dynamic Mechanical Properties of Cellulose Poly(vinyl alcohol) Blend Films [Volume 6, Issue 2, 2015, Pages 251-263]
-
Visco-cellulose
Polyvinyl chloride coating with viscous cellulose [Volume 12, Issue 3, 2021, Pages 323-336]
-
Viscoelastic behavior
Investigation of the mechanical-dynamic and thermal properties of nanocomposites manufactured from rapeseed stalk flour/ nanographene and high-density polyethylene [Volume 13, Issue 4, 2022, Pages 445-456]
-
Viscosity
Investigation on pulp production using γ-valerolactone organosolv process from birch wood [Volume 10, Issue 3, 2019, Pages 429-443]
-
Viscozyme
Use of viscozyme enzyme as an alternative technology for pulp refining and improvement bagasse soda pulp properties [Volume 6, Issue 1, 2015, Pages 95-108]
-
Volume swelling
Study on the potential use of nano-wollastonite to improve the fire resistance and dimensional stability of poplar wood (Populus nigra) [Volume 4, Issue 2, 2013, Pages 1-10]
-
Volumetric swelling
Study on the Effect of Combined Nanosilver- Hygrothermal
Treatments on Wood Properties [Volume 5, Issue 1, 2014, Pages 93-106]
-
Volumetric swelling
Effect of Nano-Zinc Oxide on the Physical and Mechanical properties of
Paulownia Wood (Paulownia fortunei) [Volume 4, Issue 1, 2013, Pages 77-85]
W
-
Walnut
Effect of coating with Shellac on acoustic properties in white mulberry wood [Volume 9, Issue 1, 2018, Pages 27-40]
-
Walnut wood
The Investigation of Acoustic Properties of Carbon Fiber-Polyester Composites and Comparing the Results with Poplar, Walnut and Beech Wood Specimens [Volume 1, Issue 2, 2011, Pages 83-101]
-
Washing method
Effects of washing method on the bagasse pulping characteristics by Sulfur Dioxide- Ethanol-Water (SEW) process [Volume 7, Issue 4, 2016, Pages 549-559]
-
Waste paper
The effect of Nano clay and coupling agent on the physical and mechanical properties of polypropylene waste paper composites [Volume 7, Issue 2, 2016, Pages 193-206]
-
Waste paper
Utilization of recycled fibers from MDF wastes and waste paper for manufacturing fiberboard and the effect of poly vinyl acetate on its practical properties [Volume 11, Issue 2, 2020, Pages 173-183]
-
Waste paper
Structural properties and thermal stability of nano crystalline cellulose produced from waste paper [Volume 13, Issue 1, 2022, Pages 37-47]
-
Waste rubber
mechanical properties of light weight sandwich panel made of sawdust and waste rubber [Volume 10, Issue 4, 2019, Pages 521-530]
-
Water jet
Evaluation of wood machining parameters and surface quality in cutting process by water jet without abrasive material [Volume 12, Issue 3, 2021, Pages 429-440]
-
Water Retention Value
Influence of Recycling on Chemical Properties and Hornification of CMP and [Volume 3, Issue 1, 2013, Pages 99-108]
-
Water retention value (WRV)
Effect of Lactase Enzyme on Delignification and Physical
Properties of OCC Pulp [Volume 3, Issue 2, 2013, Pages 157-170]
-
Water uptake
A Study on Tensile Behavior and Water Uptake of Wood Powder-Composites Based on Epoxy and Unsaturated Polyester Resins [Volume 3, Issue 2, 2013, Pages 141-156]
-
Water uptake
Investigation on the physical properties of poplar wood (Populus deltoids) modified with glutaraldehyde/paraffin [Volume 8, Issue 4, 2017, Pages 617-630]
-
Weathering
Effect of Weathering Time on the Physical - Mechanical Properties and Color Change in Wood Flour/HDPE Composite [Volume 5, Issue 1, 2014, Pages 75-83]
-
Weathering
Properties Evaluation of High Density Polyethylene Composite Filled with Bagasse after Accelerated Weathered [Volume 3, Issue 2, 2013, Pages 119-130]
-
Weathering
Study of linseed oil on white poplar wood (Populus alba L.) as a traditional treatment for historical wooden relics against weathering [Volume 5, Issue 2, 2014, Pages 93-106]
-
Weathering
Effect of weathering on mechanical and physical properties of wood-polyethylene composite containing of titanium dioxide nanoparticles, photo stabilizer and heat treated wood [Volume 8, Issue 3, 2017, Pages 349-360]
-
Weathering
Effect of weathering on Surface properties of HDPE-based wood plastic composites [Volume 8, Issue 4, 2017, Pages 483-496]
-
Weathering
Microscopic investigation on the effects of wood surface modification with sol-gel method on the quality of polyurethane and alkyd coatings [Volume 8, Issue 4, 2017, Pages 509-520]
-
Weathering
Improving Weathering Performance of Beech Wood Coated with Acrylic Paint by nano zinc oxide and nano cellulose [Volume 10, Issue 2, 2019, Pages 311-321]
-
Weighting values
Determination and evaluation of effective criteria to
location selection the optimal for establishing fluting paper mills from
agricultural residues of Mazandaran province [Volume 4, Issue 2, 2013, Pages 45-64]
-
Weight loss
A Survey on biodegradation, hardness and dimensional stability of a hybrid composite of wood flour / polypropylene / glass fiber in different circumstances [Volume 8, Issue 2, 2017, Pages 211-223]
-
Weight percent gain
Comparison the performance of different catalysts in chemical modification of Poplar wood with Glutaraldehyde [Volume 7, Issue 3, 2016, Pages 363-375]
-
Weight percent gain
The effect of chemical treatment of wood flour on some of properties of wood plastic composite [Volume 7, Issue 3, 2016, Pages 449-462]
-
Wet and Dry paper strength
Improvement of wet and dry layer strengths of paper from chemi-mechanical pulp using polyamide epichlorohydrin and cellulose nanofibers vs imported long fiber Kraft pulp [Volume 11, Issue 4, 2020, Pages 627-643]
-
Wetting ability
Investigation of the Natural Durability of Beech Wood by Meyer-Veltrup Model [Volume 14, Issue 4, 2023, Pages 377-387]
-
Wheat straw
Effect of pre- extraction liquid reuse on and soda-AQ pulp properties made
up of wheat straw [Volume 4, Issue 1, 2013, Pages 1-12]
-
Wheat straw
The Beatability of Wheat Straw Soda and Monoethanolamine Pulps [Volume 7, Issue 2, 2016, Pages 155-166]
-
Wheat straw
Study of physical and mechanical properties of produced strawboard using bio epoxy tannins resin [Volume 7, Issue 2, 2016, Pages 271-282]
-
Wheat straw
The Effect of wheat straw particle size on the mechanical and water absorption properties of wheat straw/low density polyethylene biocomposites for packaging applications [Volume 8, Issue 2, 2017, Pages 253-265]
-
Wheat straw
The influence of hot water pre-extraction of wheat straw hemicelluloses on monoethanolamine-AQ and soda-AQ pulp properties [Volume 10, Issue 3, 2019, Pages 361-372]
-
Wheat straw
The effect of residual xylan on cellulose nanofiber production through electrospinning of wheat straw [Volume 10, Issue 4, 2019, Pages 543-558]
-
Wheat straw
Optimization of production variables of natural fibers- cement composites by response surface methodology (RSM) [Volume 11, Issue 1, 2020, Pages 97-108]
-
Wheat straw
The effect of alkali treatment of wheat straw powder on particle board properties made from mixing wheat straw and industrial wood chips [Volume 12, Issue 1, 2021, Pages 57-71]
-
Wheat straw
The potential of using tomato stalk pulp as long fibers in reinforcement of wheat straw commercial cold soda pulp [Volume 14, Issue 4, 2023, Pages 433-444]
-
Whole crop biorefinery
Investigation on the Potential of Using the Residual Fibers from Fractionation of Canola Stalk with Glycerol in Pulp Production [Volume 14, Issue 2, 2023, Pages 139-153]
-
Wild service tree
Anatomical, Biometrical, Physical and Chemical properties of wild service tree (Sorbus torminalis L.) (Case study: Sangdeh forests of Mazandaran) [Volume 9, Issue 4, 2018, Pages 597-608]
-
Withdrawal
Study on the tensile strength of ready-to-assemble and fixed corner joints on
medium density fiberboard [Volume 4, Issue 1, 2013, Pages 49-63]
-
Withdrawal resistance
Determination of Screw and Nail Withdrawal Strengths in Parallel and Perpendicular to Grain of some Hardwoods of Iran [Volume 3, Issue 2, 2013, Pages 171-180]
-
Withdrawal resistance
Establishing mathematical model withdrawal resistance of wooden dowel in
plywood [Volume 4, Issue 1, 2013, Pages 37-47]
-
Withdrawal resistance
Determination of withdrawal resistance of staple joints constructed with various members of upholstered furniture [Volume 8, Issue 1, 2017, Pages 95-108]
-
Withdrawal resistance
The investigation of the affecting factors on withdrawal resistance of the wooden biscuit joints [Volume 11, Issue 1, 2020, Pages 121-131]
-
Withdrawal resistance
Evaluation of resistance of wooden biscuit joints in mediumdensity fiberboard and particleboard under tensile and shear loads in T and L-type members [Volume 13, Issue 2, 2022, Pages 187-200]
-
Withdrawal resistance
Withdrawal resistance and lateral shear strength of the nail connector in cypress wood (Cupressus arizonica ) treated with ACC and ACQ with emphasis on the use in NLT [Volume 14, Issue 2, 2023, Pages 113-125]
-
Withdrawal strength of screw and nail
Investigation on the withdrawal strength of screw, nail and water absorption of Nanoclay-MDF dust-PP composite [Volume 3, Issue 1, 2013, Pages 52-66]
-
Wood and paper industry
Identification and Evaluation of Oncoming Changes of Wood and Paper Industries of the Country [Volume 2, Issue 2, 2011, Pages 27-38]
-
Wood and paper products
Studying Imports of Wood, Paper and their Products in the World and Iran from 1998 to 2007 [Volume 1, Issue 2, 2011, Pages 37-54]
-
Wood- based material
Study on Influensive Factors on Surface Quality and Edges of Through- Holes Bored in Particleboard and MDF [Volume 3, Issue 1, 2013, Pages 67-79]
-
Wood- Cement Composites
Investigation Some of Physical and Mechanical Properties of Polypropylene Fiber/ Wood /Cement Composites [Volume 7, Issue 2, 2016, Pages 207-217]
-
Wood chips
Evaluation of Effect of Steam Pretreatment on Water and Liquor Absorption of Wood Particles [Volume 2, Issue 2, 2011, Pages 111-120]
-
Wood-composite panels
Study on long term creep of two different types of compressed wood sheets used in library shelves [Volume 7, Issue 3, 2016, Pages 437-447]
-
Wood dowel
Analysis of stress- strain distribution of dowel and glue line in L-type furniture joint by means of finite element method [Volume 8, Issue 2, 2017, Pages 297-307]
-
Wooden dowel
Investigating the Stress Carrying Capacity of Corner Joints In The
Furniture Frame Fabricated With Dowel [Volume 5, Issue 1, 2014, Pages 21-32]
-
Wooden dowel
The possibility of designing and constructing standard tables and chairs with palm trunk [Volume 10, Issue 4, 2019, Pages 575-587]
-
Wooden products
Investigating the effective factors in making Kitchen cabinets made of wooden panel products [Volume 14, Issue 2, 2023, Pages 183-197]
-
Wood fiber
Investigation Some of Physical and Mechanical Properties of Polypropylene Fiber/ Wood /Cement Composites [Volume 7, Issue 2, 2016, Pages 207-217]
-
Wood fibers biometrical
Recognition and rating of effecting indexes on consumption of different sites poplar wood production in Iran for paper making industries [Volume 7, Issue 3, 2016, Pages 425-436]
-
Wood flour- polypropylene composites
Effect of Lignin Mixing Method on Physical and Mechanical Properties of Wood Flour- Polypropylene Composites [Volume 1, Issue 2, 2011, Pages 103-113]
-
Wood flour- Recycled
A Study on Creep Behavior of Wood Flour- Recycled Polypropylene Composite [Volume 3, Issue 2, 2013, Pages 1-12]
-
Wood flour- recycled polypropylene composites
Effect of Impact Modifier Type on Water Absorption and Thickness Swelling Parameters of Wood Flour- Recycled Polypropylene Composites [Volume 2, Issue 2, 2011, Pages 115-24]
-
Wood Furniture Industry
Studying and Assessment of the Effective Criteria on Opportunities Attainment from Offshore Outsourcing in Iran Wood Furniture Industry [Volume 6, Issue 2, 2015, Pages 203-216]
-
Wood-Gypsum composite board
Study on the Possibility of Recycled-Banknote Utilization in the Production of
Wood Gypsum Composite-boards [Volume 4, Issue 1, 2013, Pages 87-99]
-
Wood identification
Identifying the wood type and investigating the quality of imported wooden ice cream sticks [Volume 12, Issue 4, 2021, Pages 495-506]
-
Wood modification
Comparing the effect of modification with different silane compounds on the chemical structure and physical properties of poplar wood [Volume 10, Issue 2, 2019, Pages 223-235]
-
Wood-Plastic Composite
Investigation adding of Nano clay particles and compatibilizer on the properties of composite made of polypropylene- Haloxylon wood flour [Volume 7, Issue 3, 2016, Pages 335-348]
-
Wood-Plastic Composite
The effect of nanoclay particles and compatibilization of oxidized polypropylene in molten phase on the mechanical and physical properties of wood-plastic composite [Volume 9, Issue 1, 2018, Pages 137-151]
-
Wood-Plastic Composite
Investigation on the Possibility of Physical and Mechanical Properties Modification of Wood-Plastic Nanocomposites By Microwave Radiation [Volume 13, Issue 3, 2022, Pages 261-273]
-
Wood-plastic composites
Effect of Bagasse Chemical Pulping and Coupling Agent on the Physical - Mechanical Properties of Composites Based on Bagasse pulp/Low density polyethylene [Volume 7, Issue 3, 2016, Pages 349-362]
-
Wood Plastic Composites
Study on Physical and Mechanical Properties of Wood flour / ABS Composites [Volume 6, Issue 1, 2015, Pages 79-93]
-
Wood Plastic plywood
Investigating the bending creep behavior of poplar wood plastic plywood manufactured by thermoplastic films [Volume 13, Issue 4, 2022, Pages 393-403]
-
Wood–polymer
Effect of cell wall modification of styrene wood polymer with maleic anhydride and glycidyl methacrylate on thermal stability, mechanical behavior and biological resistance of composite [Volume 7, Issue 4, 2016, Pages 601-614]
-
Wood–polymer
Comparing the effect of cell wall modification with glycidyl methacrylate and maleic anhydride on the physical, mechanical and biological properties of poplar wood-styrene polymer composite [Volume 12, Issue 2, 2021, Pages 259-270]
-
Wood-Polymer
Methods of retention increasing urea formaldehyde resin in order to produce wood-polymer from Paulownia [Volume 5, Issue 1, 2014, Pages 107-117]
-
Wood–polymer composites
Investigation on physical behavior of styrene wood-polymer in different concentrations of monomer [Volume 7, Issue 2, 2016, Pages 231-239]
-
Wood powder-composite
A Study on Tensile Behavior and Water Uptake of Wood Powder-Composites Based on Epoxy and Unsaturated Polyester Resins [Volume 3, Issue 2, 2013, Pages 141-156]
-
Wood preservative
Withdrawal resistance and lateral shear strength of the nail connector in cypress wood (Cupressus arizonica ) treated with ACC and ACQ with emphasis on the use in NLT [Volume 14, Issue 2, 2023, Pages 113-125]
-
Wood Production
Comparing the economic value of market function and unmarket function of some populus species [Volume 10, Issue 2, 2019, Pages 217-222]
-
Wood species
Investigation on the Scratch Strength of Clear Paints Used in Furniture Industries on the Wood Species Beech, Elm, Alder and Spruce [Volume 5, Issue 1, 2014, Pages 33-44]
-
Wood veneer images
A New Method for Defect Detection on Images Captured from Wood Veneer: Optimization of Energy Function on Natural Texture Eliminated Image [Volume 6, Issue 2, 2015, Pages 299-309]
-
World imports
Studying Imports of Wood, Paper and their Products in the World and Iran from 1998 to 2007 [Volume 1, Issue 2, 2011, Pages 37-54]
-
WPC
Determination of Effective Criteria for location Selection of WPC Plants from agricultural residues in Iran by AHP Technique [Volume 7, Issue 4, 2016, Pages 499-510]
X
-
X-ray spectroscopy
Tracking and Simulation of Dry Shell Formation in a Wood Drying Process by X-ray Spectroscopy [Volume 1, Issue 2, 2011, Pages 1-11]
-
XRD Analysis
The Effect of Nanoclay on Physical and Mechanical Properties of Particleboard Made from Urea-Kraft Lignin- Glyoxal Green Wood Adhesive [Volume 8, Issue 1, 2017, Pages 119-129]
-
Xylanase
Using of xylanase and cold caustic extraction to remove hemicellulose from bagasse bleached pulp for dissolving pulp production [Volume 10, Issue 1, 2019, Pages 1-9]
Y
-
Yield
Investigation of pulping and paper making potential of weeds [Volume 8, Issue 2, 2017, Pages 241-251]
-
Yield potential
Investigation on anatomical, chemical and pulping characteristics
of Silybum marianum stem [Volume 4, Issue 2, 2013, Pages 59-68]
Z
-
Zein
Production of zein, chitosan, nanocellulose Nanocomposite , dynamic analysis and glass transition temperature [Volume 8, Issue 3, 2017, Pages 471-481]
-
Zein
The effect of corn zein coating on the strength and barrier properties of liner paper [Volume 13, Issue 2, 2022, Pages 213-223]
-
Zeolite
Using Zeolite as a Filler with Chitosan Biopolymer in Papermaking [Volume 11, Issue 3, 2020, Pages 407-417]
-
Zeolite
The possibility of using zeolite as a retarder of particleboard obtained from sugarcane pulp [Volume 12, Issue 3, 2021, Pages 309-321]
-
Zeolite
Effect of Mixing Zeolite Compounds in Manufacturing Process of Medium Density Fiberboard on Physical and Mechanical Properties [Volume 14, Issue 1, 2023, Pages 41-53]
-
Zeta Potential
Effect of Self-assembly Layering Factors of Cationic Starch on Pulp Zeta Potential [Volume 13, Issue 1, 2022, Pages 83-96]
-
Zinc oxide nanoparticles
Investigation of resistance and optical properties of the papers treated with cellulose nanocrystals and zinc oxide nanoparticles [Volume 10, Issue 3, 2019, Pages 407-415]
-
Zinc oxide nanoparticles
Investigation on coating of paper with biodegradable polymers and Zinc Oxide nanoparticles on its mechanical and barrier properties [Volume 14, Issue 1, 2023, Pages 97-111]
-
Ziziphus spina-christi
Chemical Characterization of Ziziphus spina-chrisiti Wood Extractives using Gas Chromatography/Mass Spectroscopy Technique [Volume 4, Issue 2, 2013, Pages 69-78]
-
ZnO nanoparticle
Investigation of isotherm and kinetic of methylene blue adsorption by Tobacco residues activated carbon/ZnO nanocomposites with non-linear method [Volume 11, Issue 1, 2020, Pages 71-83]
Your query does not match with any item